Your cart is empty.
Your cart is empty.Specially developed ink technology to create a petri effect in resin. The ink is 100% pigmented and concentrated. It is not suitable for painting with alcoholic inks as the product ingredients prevent drying on the surface. Use a resin that has a maximum curing time of 24 hours. Mix the resin and hardener thoroughly to avoid errors in your product. Mix slowly to avoid the formation of excessive air bubbles inside (if the resin has a homogeneous, transparent consistency, you can pour it into the mould). You can start working when the air bubbles rise to the surface and you remove them. Shake the vessels regularly before each drop to ensure that the mixture is homogeneous. Do not drop the paint near the silicone mold, otherwise it will not drown in the resin. At the end, you can move a toothpick over the resinto create patterns. If the resin is too liquid, wait 20-30 minutes and then start working with the paint. This increases the viscosity and the color does not fall too hard on the bottom. The more liquid the resin, the more paint will fall on the bottom. Precautions: It is recommended to work in well-ventilated spaces; the product is flammable and should be kept out of reach of children and away from open flames. Use for intended purpose only. In case of contact with the mucous membranes, rinse thoroughly with water and seek medical advice if necessary. Storage and shelf life: 36 months before opening, 6 months after opening the bottle. Store in a closed bottle at a temperature of 5 to 25 degrees Celsius. Avoid sudden temperature changes and open sunlight.