Your cart is empty.
Your cart is empty.
Key Feature
This Battery Monitor is designed to monitor performance most kind of battery systems with capacities of up to 999 Amp hours.
Read your battery bank like a fuel gauge.
Battery Status At A Glance.
STN Full view LCD screen.
Combines many functions in one, these information leads to more efficient use of the battery, which can enhance battery life and reduce the risk of failure.
State of Charge (%),The remaining battery capacity (AH). Charge and discharge current (A), Voltage (V). Power (W), Energy (WH/KWH).
Charging status indicator, looks like a smartphone.
Come with a Through-hole Current transformer, it doesn't require shunt.
The current sensor can be placed on the Positive or Negative side of power.
Reverse polarity protection.
Doesn't require isolated power, self-powered 5-90V.
Nondestructive installation, it is very easy to install.
Technical Specification
Power Supply 5~90Vdc
Voltage Range 0~300V
Current Range -400.0A ~ +400.0 A
Energy Range 0~999KWH
Power Range 0~999KW
Capacity Range 0-999AH
Resolution 0.1V, 0.1A, 0.1AH, 0.1W, 1WH
Display Type STN Full view LCD screen
Sensor hole dimeter 20mm
Dimensions 79mm*42*22.2mm
Panel Cut-out 72mm*39mm
The auction includes
1 × Battery monitor
1 × Current transformer
1X 2 meters long cable
1 × English operation manual
Carter
Reviewed in the United States on September 17, 2022
I had a 200 amp on my solar. Since I added panels I needed 400 amp. This swapped out easily. The first one lasted 2 years and was still performing.
enrico
Reviewed in Italy on June 5, 2022
Il prodotto funziona bene come da descrizione,l unica pecca che ah rimasti di carica della batteria non sono reali.
Andreas
Reviewed in Sweden on December 21, 2022
Ser ut att mäta ström korrekt, även om spänningen tycks vara lite högre än vad ändra mätare visar.Enkel att installera, men något korta och fjuttiga kablar som jag var tvungen att förlänga.Något svår att ställa in på grund av den bristfälliga manualen. Krävdes lite googlande för att förstå hur man ställer in korrekt ampere och ställer in gränser för varningar.
Bobby Greenwell
Reviewed in the United States on May 14, 2021
Item seems to be right for my application, but I have a feeling someone wasn't paying attention during assembly (see photos). Opened everything up and was prepping for install when I noticed that the back panel of the display had the cutout for the two plugs, but no plugs. Pulled gently on it and it popped off, so that I could see that someone had put the panel on backwards. Popped back in place (correctly this time), and all seems to be well. I think someone was thinking about eating their cheetos for lunch and not paying attention while this was being put together. Several YT videos available for installation assistance, calibration and general function. I would definitely not rely on (wholly lacking) set of instructions included.
Gianni_Cap
Reviewed in Italy on February 8, 2021
Strumento ottimo, facile da installare. Misura la tensione e l'assorbenza in ingresso ed in uscita dalla batteria. Non richiede nessuna modifica dell'impianto elettrico ne l'installlazione di uno shunt. È sufficiente scollegare il polo positivo della batteria far passare il/i cavi all'interno del toroide, ricollegare il positivo ed il gioco è fatto. Occhio al verso del toroide. La corrente in ingresso dovrebbe essere rilevata come positiva quella in uscita come negativa. La programmazione è semplicissima. Le istruzioni sono solo in inglese ma qui tra i commenti c'è anche chi si è assunto l'onere di tradurle (grazie! ). La misurazione confrontata con un tester è risultata essere precisa. Confrontato con il blasonatissimo e costosissimo shunt Victron non ho riscontrato differenze di rilievo. Questo strumento ha dimostrato quindi di avere un buon rapporto qualità-prezzo. Sono più che soddisfatto dell'acquisto e lo consiglio.
Timbukto
Reviewed in the United States on December 7, 2021
Set up was straight forward but as the ah reading drops the battery gauge stays at 100%. It always displays a fully charged battery even when the 200ah display is at 100ah when it should show 50%. Reset everything and still the same problem. Also the memory feature does not work, when turned off it should keep the display readings when turned back on but the display resets. This is my second ah display unit for my Polaris EV so I do know how to set this up. There is a problem with this unit.
Kindle Customer
Reviewed in the United States on November 23, 2021
Works great! I'm using this meter in line with my 3000 watt inverter.
Thorsten Draisbach
Reviewed in Germany on November 13, 2021
The media could not be loaded.
Customer
Reviewed in Australia on March 22, 2020
Works out of the box. No complicated connections. Battery monitoring good.
B Smooth
Reviewed in the United States on January 12, 2020
The only thing that is not perfect about this unit is the drift on the current measurement. The current has to be zeroed out regularly. I purchased this to chase down a intermittent parasitic current drain in one of my vehicles. Once zeroed I get a small error after sitting a few days as much as 2 amps. It seems to slow the further is goes out. I pull the battery wire and zero it and it slowly creeps up the current reading. The transducer is large enough for a 2 gauge wire and you can see a change with very small current change, for instance, one of the control modules shuts down after a minute or so and it's 250ma. It's neat to see how your charges and how much. I often searched the internet to find out how much current a car starter pulls when cranking, every one has a different answer, now I know. 200 down to 150 amps. Quite pleased.
Miamijerry
Reviewed in the United States on September 25, 2019
Voltage reading is dead on correct. Needs to be wired so charging shows as a negative number and discharging shows as positive number. I had to deep cycle the battery (Take it down to 10v with a 10 amp load) and then as it charged back up, the battery Icon and AH reads starting working correctly. Mine came with a long lead which was perfect to go from the battery, inside the car and across the dash. "Under Voltage" setting, sets the voltage at which the voltage number starts flashing. Great purchase.
David Sanz
Reviewed in the United States on July 10, 2019
Ease of use, non invasive hall-effect-current sensor. Detailed instructions, accuracy about 98,5% in voltage meter, and 90% in current meter.
donesp
Reviewed in the United States on October 4, 2019
Really easy to use and works great. My only issue is with the enclosure - it will not stay clipped together. Had to use tape.
Recommended Products
$12.05
$ 5 .99 $5.99