Shopping Cart

Your cart is empty.

Your cart is empty.

Ade Advanced Optics RD3-006 Green Dot Sight + Optic Mounting Plate for Taurus PT111 G2, Millennium G2, G2C, G3 with Original Rear Sight, PT140 G2, PT709, PT740, TX22 + Pictinny Plate

Free shipping on orders over $29.99

$87.99

$ 38 .99 $38.99

In Stock

About this item

  • Comes with a ADE RD3-006 Green dot, a Picatinny plate and a pistol optic plate to REPLACE the rear sight of G2c, G2s, G2, PT111 G2, Millennium G2, and TX22 Pistols.This plate also fits Taurus G3 with Original Rear sight(see photo)
  • This plate does NOT fit G3 with NEWER FACTORY STEEL SIGHT, G3C, please search "ADE G3C/GLOCK PLATE" on amazon. Does NOT fit Taurus new TX22C( TX22 Compact) which is Optics Ready, please see ADE RD3-018 SPIKE and RD3-021 NUWA(and NUWA PRO) and RD3-030 Apollo fit directly without any plate/adaptor.
  • Does NOT fit the Taurus G2/G2C Generation 2 that has a steel/small rear sight. Please inspect the photo before purchasing.
  • The ADE RD3-006 has been upgraded with several enhancements to improve functionality and user experience. The rear locking screws have been removed and replaced with a self-locking mechanism for easier use and greater reliability. Additionally, the new motion-activated technology puts the green dot illumination into sleep mode after five minutes of inactivity, instantly reactivating it at the previous brightness setting when motion or vibration is detected, ensuring seamless operation and improv
  • This GREEN dot comes with a picatinny mounting plate pre-assembled (might be packaged separately in the retail package, depends on the ADE model). Please use the allen wrench provided to take out the 2 hex screws(M3x6mm) on the top behind the glass frame. It will disconnect the red dot from the picatinny mounting plate. You will then be able to attach the red dot to a variety of handgun mounting plates
  • This RD3-006 is the newest version that equipped with Motion Awake Technology. While the green dot is turned on, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on illumination at the previous brightness setting.
  • 4 MOA. Operates with a single CR2032 battery(installed underneath). Multiple brightness setting. 1000 hours battery life on the brightest setting. Auto turns off after 4 hours. Approximately 1.01"H x 1.9"L x 1.1W



Product Description

ADE RD3-006 Green Dot Sight

Comes with a ADE RD3-006 Green dot, a Picatinny plate and a pistol optic plate to REPLACE the rear sight of G2c, G2s, G2, PT111 G2, Millennium G2, and TX22 Pistols.This plate also fits Taurus G3 with Original Rear sight

ade Advanced Optics RD3-006 Green Dot Sight

This GREEN dot comes with a picatinny mounting plate pre-assembled (might be packaged separately in the retail package, depends on the ADE model). Please use the allen wrench provided to take out the 2 hex screws(M3x6mm) on the top behind the glass frame.

ade Advanced Optics RD3-006 Green Dot Sight
ade Advanced Optics RD3-006 Green Dot Sight

macclong
Reviewed in the United States on May 26, 2024
I purchased the sight complete with a mounting plate for the G2C. The sight itself is very nice, easy to see the green dot. My only complaint is that you have to press the button for three seconds to turn it on, this is not a shake awake. It has several brightness levels, from too low to too bright in my opinion. No complaints at all about the optics themselves.The mounting plate is another story. While I had to use a sight press to remove the original rear sight, the dovetail on the mounting plate was very loose, just slid right on with no effort. I used Loctite on the single screw that holds the plate to the firearm, but the plate was wiggling after about 20 rounds on the range. Now I'm deciding between using some metal epoxy to permanently mount the plate, or finding one with a snug dovetail.
Josh Kinzie
Reviewed in the United States on December 16, 2024
I thought I would ignore the reviews, and give us thing the benefit of the doubt. I was wrong. Haven’t really been able to use the sight because the mounting plate that came with it will not stay tight. The screw that’s used to attach to the mount to the slide has too small of a head on it, so it will not stay tight. Tried locktight, red and blue, the mount still keeps coming loose after a few shots finally went back to my original sights. Going to order a quality mounting plate.
Ray Bandjough
Reviewed in the United States on December 12, 2024
Just what he wanted, Thank You!!!
Customer
Reviewed in the United States on November 13, 2024
It fits my taurus g2 as it said in the description
doc1mobile
Reviewed in the United States on March 17, 2023
The ADE RD3-006A1 GREEN DOT sight, itself, appeared fairly accurate and the overall installation was fairly easy in accordance with the provided instructions, including removal of the Picatinny mounting plate.The issues encountered came with:1) Not holding zero: Upon checking that the Optic was securely in place, after installing the "anti-vibration shim between the EPS and the G2C mount plate (according to the instructions) the forward section of the sight still had a slight "left and right" movement once secured and torqued in place. This occurred even after even after the G2C plate (single-point) Phillips head mounting screw had been torqued to the required 12 in./lbs. Holding Zero under these circumstances is highly questionable. 2) Removing the device resulted, in difficulty in removing the pistol optic plate. The single point, counter-sunk Phillips head screw, almost started to "strip" during extraction. Care had to be exercised by every-so-slowly turning the screw to finally remove it.3) The G2C mount plate was not a "press fit" or "snug fit" into the G2C rear sight mount. It appeared fairly loose! 4) Finally, the response as to why someone might see a "splashed dot, or Starburst was spot on!
Tyler Berg
Reviewed in the United States on December 13, 2023
Fit well after I had to go get a correct mounting screw for my g2c. Otherwise excellent unit for the price. Will be buying a second one for my wife's Taurus.
Customer
Reviewed in the United States on October 18, 2023
Popped the plate onto my tx22 (non comp edition) and it fit well, plate is decent enough. Fit is pretty good and tight. Only one screw holds it to the slid. Optic fits okay onto the plate and screws down well. The dot and modes are pretty good and crisp. Gets pretty bright for daytime use. It seems like the sighting screws aren't great. There's no clicks, it's just a loose spin and there doesn't seem to be a ton of adjustment when screwing. Didn't last a range trip and isn't worth the money. Piece of trash. It fails to hold zero on a 22, the dot floats up after a few rounds. Might be fine for an air soft gun but don't purchase this for any caliber pistol that has a reciprocating slide. It CANNOT handle the recoil and will lose zero or just shut off
Rick boyer
Reviewed in the United States on September 3, 2022
This optic works very well and holds zero if installed and used properly. I was able to zero it in at 30 feet with only 3 shots and it held that exact point of impact for over 300 rounds of shooting that day. I am extremely impressed for the price.