Shopping Cart

Your cart is empty.

Your cart is empty.

Accusize Industrial Tools Style Axa Turning and Facing Quick Change Tool Post Holder for1/2'' Turning Tools, Style 1, 0250-0101

4.3 (13) Write Review
Free shipping on orders over $29.99

$21.95

$ 10 .99 $10.99

In Stock
  • For Lathe Swing 6-12''
  • Quick Change Tool Post Holder (USA STYLE). Made of steel.
  • Lathe Swing: 6 - 12'', AXA
  • A: 15/16''
  • B: 1/2''
  • Includes one 0250-0101 turning and facing quick change tool holder, optimized for 1/2'' turning tools to enhance machining operations.
  • Designed for AXA quick change tool posts (USA STYLE), ensuring seamless integration with your existing setup for increased efficiency.
  • Accommodates tool bits with shank sizes from 3/16" to 1/2", offering versatility across a wide range of turning and facing tasks.
  • Features a tool slot width of 1/2", providing a secure and precise fit for improved tool stability and accuracy in machining operations.
  • Constructed from high-grade steel, ensuring durability and reliable performance under rigorous machining conditions.


Product Description

Accusize 0250-0101 Turning and Facing Quick Change Toolholder, working with USA Style AXA Quick Change Tool Posts, clamping from 3/16" to 1/2" shank lathe tool bits.

Specifications

Style AXA
A 15/16"
B 1/2"
C 7/16"
D 1-1/2"
Tool Bit From 3/16" to 1/2"
L1 1.691"
L2 1.250"
H 0.382"
Identify AXA Quick Change Tool Post

For 0250-0101 AXA Turning and Facing Holder

To ensure compatibility with the AXA 0250-0101 Quick Change Tool Holder, verify that the code on your tool post has a '1' as the third last digit (e.g., 0250-0100, 250-100, 0250-0111, 250-111, 0252-0111, 252-111). This indicates it is an AXA quick change tool post.

Tip for identifying AXA Quick Change Tool Post

Common Quick Change Tool Posts for AXA Toolholders

Wedge Style

Wedge tool post provides more power when clamping the toolholder.

Piston Style

Piston tool post is more affordable

Wedge Style

Wedge tool post provides more power when clamping the toolholder.

Swing Over Bed

Fit the lathe with 9-12" Swing Over Bed

Swing Over Bed

Fit the lathe with 9-12" Swing Over Bed

Swing Over Bed

Fit the lathe with 9-12" Swing Over Bed

Single Tool Post

With the Wedge Type AXA QCTP only

Single Tool Post

With the Wedge Type AXA QCTP only

Full QCTP Set

With the full Wedge Type AXA Quick Change Tool Post and Toolholders


Annie
Reviewed in the United States on September 30, 2024
As a home hobbyist machinist I have been very satisfied with the overall fit and finish of the Accusize tool holders and have purchased at least 8 of them. The screws are properly hardened and do not have to be replaced as with some of the bargain priced ones, which makes them less of a bargain.
ahna
Reviewed in the United States on May 13, 2024
It's nothing special. It works as intended. China made.
Kenneth Pippin
Reviewed in Canada on March 11, 2024
Have full set but can use more
Robert M.
Reviewed in the United States on February 5, 2024
I have probably 8 or 9 of these now. I purchased these in addition to the ones that came with my Accusize tool post. For the money on a hobby lathe they are perfect. Cheap enough to have multiples so you’re not having to change out tooling in holders all the time…
Craig Hiebert
Reviewed in Canada on December 26, 2024
Everything fits and works as expected. Quality seems to be fine
Patrick
Reviewed in the United States on December 21, 2024
Nice holder. Above average quality for an import.
CO
Reviewed in the United States on August 6, 2023
I believe these Accusize tool holders are the best alternative to the Aloris brand ones. Don't get me wrong, I would love to have strictly Aloris holders, but I am just a hobbyist and only need the best quality I can afford. I have tried several different brands and these are the best as far as fit and finish.They lock up well on my toolpost just like my Travers Tool Company ones. The grinding work on the dovetail is superb. Everything is deburred and chamfered nicely as well. The tapped holes and set screws fit well and are not super sloppy like some off brands. The set screws are 8mm and have a straight dog point reduced tip. This feature is a nice touch too, to keep from damaging the threads of the screw. The screws will take a 4mm or 5/32" sized allen key. These tool holders could easily be used professionally in a machine shop.You can never have too many tool holders and these are perfect for me. I like to leave certain tools set up all the time and ready to go! I even built a nice rack to keep them clean, nice, and handy. Give them a try in your shop.
Jose
Reviewed in the United States on October 14, 2023
I asked Accusize whether a 1616 (16mm square) tool would fit. The answer was discouraging, but I went ahead and ordered one. The 1616 (16mm) tool fits fine. Compared to the Dorian "3/4" holder that I bought for the same tool from another source and had to return for poor workmanship, the Accusize was better made. Set screws turned freely, and maybe even more important, the slot is milled deeper so most of the tool fits in the slot. The Dorian slot was shallow and a lot of the 16mm (5/8") tool hung outside the slot. Actual slot width was about 0.638" (not measured carefully).
RBD
Reviewed in the United States on October 13, 2023
I obtained a number of 16 mm insert style turning tools and needed a quick-change tool holder to match. This product worked perfectly. As with the other tool holders purchased from this seller, it reflects good quality at a competitive price.
Robert
Reviewed in Canada on September 2, 2022
Works well on same brand tool post.
Customer
Reviewed in Canada on March 15, 2020
Great finish to these products, very well made. They allow the use of 5/8 inch shank tools which is a great help when using carbide tips. I've never been able to find a 1/2 inch tool to take a carbide thread cutting tip, which is all the normal AXA toll holders will fit, so very useful, well worth the money.
Tom Kitta
Reviewed in Canada on October 27, 2020
The media could not be loaded.
Dave
Reviewed in the United States on January 18, 2018
These toolholders are great. They will fit any AXA quick change tool post from any manufacturer, as long as it's type AXA.The height adjustment uses a combination of a knurled nut, wave washer and hex nut to keep it from moving around when being handled, installed or removed on the lathe.The items are packed coated with what I am betting is way oil, so unlike cosmoline it wipes clean easily. The paint coating is solid, no flaking or any signs of poor surface prep. The coated part is packed in plastic then in a small cardboard box. I've bought a bunch of these and none have ever shown up with any defects, rust, or other corrosion.I am sure there are more fancy options out there, but when you consider the sheer number of these things that a lathe owner ends up with, price starts to matter, particularly when you use a lathe like I do - not professionally.