Your cart is empty.
Your cart is empty.Product Description
Accusize Industrial Tools Straight Shank ER Collet Chuck
Accusize Straight Shank ER Collet Chuck (Hex & Slotted)
- Made of high-quality alloy steel
- Hardened to HRC 56-60
- Precision ground
- 0.0002" TIR or better
Diagram
Design, Assemble, and Dissemble
Eccentric Design, ISO 15488:2003(E)
The inside of the ER collet nut is intentionally designed like off-centering to help mount the ER collet much easier. It is in accordance with the requirements listed in ISO 15488:2003(E). If it is made symmetrical, the ER collet with the diameter larger than the inside size of the collet nut cannot be installed.
Assemble
Insert the ER collet into the nut at an angle. Lock it onto the eccentric groove of the collet nut and push it in. (Insert the cutter right after the step, before connect it to the holder/chuck/arbor.)
Inspection
Inspect the RPM of the ER collet, ER collet nut, ER collet holder/chuck/arbor, etc.
Dissemble
Take out the tool bit, press the end of the ER collet until the collet off the position. Push it out of the nut. (after take out the nut out of the holder.)
Old Man in the Cave
Reviewed in the United States on September 27, 2024
This ER20 collet chuck from the Accusize Industrial Tools Store on Amazon is everything a collet chuck should be. It arrived well packed and I found no burrs, sharp edges, swarf or grit. The machining is first rate. Recommended.
Customer
Reviewed in Canada on September 27, 2024
Nice extension but no flat on it. If your going to use it in a set screw application you may have to take it to the mill first.
Miriam Volle
Reviewed in the United States on September 26, 2024
This is a nicely finished extension and the nut fits well and turns very smoothly -Tolerances seem to be consistent with the spec (some of my collets aren't)Mounted in my mill and performed as expected -good value and works well -
Cody W Colvin
Reviewed in the United States on March 27, 2024
I already own this same collet chuck in the ER16 size. Both are excellent tools that look great and function very well.
RR
Reviewed in Canada on February 17, 2024
Accuracy is correct. Excellent tool, great quality. To those having issues, check your 5C collets. This chuck exposed a bad collet of mine.
Customer
Reviewed in the United States on December 19, 2024
Accusize Industrial Tools has a Record of delivering reliable precision tools made for the Machinist for as long as I can remember, the ACCUSIZE 3/4" ER20 Collet Chuck Extension is Picture Perfect! The ER20 Collet works as intended, the Runout on the 3/4" Precision Ground Shank is spot on. Working with the ACCUSIZE Extension & ER20 Chuck with my smaller tooling has increased production without sacrificing Quality. I gave the Accusize Industrial Tools ER20 Collet Chuck Extension a Full Five Stars Across the Board.
MrMakesALotOfStuff
Reviewed in the United States on November 29, 2024
Good ER collet adaptor.
MrCntry
Reviewed in the United States on November 13, 2024
We use drills in our CNC lathe all the time. This holder uses ER20 collets and has a 3/4" shank. The fit and finish of this collet chuck is really nice. The threads are nice and smooth and the collets fit in it just as they should.Concentricity / runout is really good. It can vary depending on your collets used. I got a runout of 0.0005" with our 1/8" collet. I tested a 1/4" collet and it ran out about 0.0002". This will very depending on your collets. The tool itself, when checked, had almost a zero runout on the front taper and the shank OD. Just as good as any other collet chuck we have.Great product for the price and we will purchase again when needed.
unclemymy
Reviewed in the United States on October 14, 2024
I've been using such machine tool equipment for well over 40 years, beginning back when every single thing we used was made in USA. It was also of the highest quality. This is not the first tool from Accusize, and everything I see from them is a product of great beauty and accuracy. It is my current go-to source for quality machine tool accessories.
NORMAN LOCK
Reviewed in Canada on October 20, 2022
GREAT STUFF
Recommended Products
$22.39
$ 11 .99 $11.99