Your cart is empty.
Your cart is empty.Product Description
Accusize 3/4" Self-lock Carbide Cut-off Tool Set
This cut-off tool kit is a time-saver. The block, blade holder, works with any toolholders that can hold 3/4" (AXA) lathe turning bits.
- [1pc] SLTBN19-5 Tool Block 3/4“
- [1pc] NCIH26-3 Adjustable Blade, 0.120" insert width
- [1pc] NCIH26-4 Adjustable Blade, 0.160" insert width
- [5pcs] GTN-3 Carbide Inserts, Grade C6, 0.120" insert width, TiN Coated
- [5pcs] GTN-4 Carbide Inserts, Grade C6, 0.160" insert width, TiN Coated
- [1pc] Insert wrench/ Insert extractor
- [1pc] Allen key
- All kits are packed in an aluminum fitted case.
Figure of SLTBN19-5 Tool Block 3/4 inch
The HD version of the specification is downloadable in Product Document.
NCIH26-3 and NCIH26-4 Adjustable Blade
- Blade marked with vernier increasing line in 32nd
- The material of the blade body is standard spring steel, which is 60Si2Mn (equivalent to the American steel ASTM9260). The Rockwell hardness after hardened is HRC40.
- Chemical Composition:
- C (0.56~0.64)
- Mn (0.60～0.90)
- Si (1.50～2.00)
- Cr (≤0.35)
- Ni (≤0.35)
- Cu (≤0.25)
- P (≤0.035)
- S (≤0.035)
GTN-3 and GTN-4 Carbide Insert (Grade C6)
- Grade C-6: a general-purpose grade for cutting all steel and stainless steels
- TiN coated for extra strength at higher speeds
- Width of NCIH26-3: 0.120"; NCIH26-4: 0.160"
- We also supply the inserts separately for the tool kit to cut aluminum (GTN-3 Inserts: 2403-8004x5 OR GTN-4 Inserts: 2403-8005x5) and stainless steel(GTN-3 Inserts: 2403-6004x5 OR GTN-4 Inserts: 2403-6005x5).
- The insert with the blade and the tool holder can achieve the following lathe tooling operations
- Cut-off
- Grooving
- Parting-off
- Chamfering
- Single-sided notation
Work with CXA Quick Change Tools Post or 3/4" Toolholders
CXA Quick Change Tool Post Set.
SKUs:
- 0251-0338
- 0251-0333
- 0251-0300
Accusize GTN-3 (2403-2004) and GTN-4 (2403-2005)Inserts for machining Steel
- Replacements of Inserts for machining steel are available.
SKUs:
- GTN-3 Inserts
- 2403-2004
- GTN-4 Inserts
- 2403-2005
Accusize GTN-3 (2403-8004) and GTN-4 (2403-8005)Inserts for machining Aluminum
- Replacements of Inserts for machining Aluminum are available.
SKUs:
- GTN-3 Inserts
- 2403-8004
- GTN-4 Inserts
- 2403-8005
Accusize GTN-3 (2403-6004) and GTN-4 (2403-6005)Inserts for machining Stainless Steel
- Replacements of Inserts for machining Stainless Steel are available.
SKUs:
- GTN-3 Inserts
- 2403-6004
- GTN-4 Inserts
- 2403-6005
Jim Roberts
Reviewed in the United States on July 16, 2024
Best parting tool I have bought on Amazon. Parted a Russian Saiga 12 hammer forged chrome lined barrel, clean as can be. I also parted a 1-1/2” 6061 aluminum round bar like butter. I normally use HSS 5/8x1/8 blade.
REO
Reviewed in the United States on June 20, 2024
Im a beginner in machining metal but all I know is after I watched a utube on how to set these up properly they cut really good. I have parted two inch cold rolled steel like nothing.
C C.
Reviewed in Canada on March 7, 2024
Outil tres faible non trempé
Will
Reviewed in Canada on January 16, 2024
Works well. The removal tool / method for the inserts is a little finicky but for the money it seems well made.
Manny V.
Reviewed in the United States on April 19, 2023
I just received my parting tool. So I had to get it on the lathe and cutting because I’ve had a part in the lathe waiting on it.Likes - it arrived quickly, cuts very well, the items arrived intact and unused.Dislike - 1 of the carbide GTN4 tips was broken in the package and what I mean by broken is that it had a huge chip out of the body of it. It appears to me that it was missed when it was new and packaged in the case and the chipped side was down so it wasn’t noticeable until I picked it up and flipped it over. Maybe they will replace it, who knows.Other than that I like Accusize tools.
Chris Ty
Reviewed in the United States on July 20, 2022
This tool is fantastic. Far better than what I have used before. I would purchase this again.
BARRY MCKENZIE
Reviewed in Canada on February 2, 2022
Works very well for all the materials I work with. I work with all metals including titanium.I will be purchasing the larger one in the future
Sandman
Reviewed in Canada on February 17, 2022
I have been using HSS in my parting tool with limited success.Bolted this on set up the height and we were parting !I would recommend this.
Chad J.
Reviewed in the United States on January 29, 2021
Sadly, I received clearly used components. There are two parts to this, first, I paid for new components, I expect new components. Second, and far more important, I have no information on how thise may have been used or abused. Is it reliable, had it been damaged or crashed. If used improperly, the blade which holds the insert may no longer retain them securely.
ralph davis
Reviewed in the United States on February 6, 2020
has done what's expected of it,can't ask for more
B Honest
Reviewed in the United States on August 3, 2018
Tool works great. Steel, aluminum, nylon. Cuts all materials with the same insert.
Steven
Reviewed in Canada on July 22, 2018
I had to mill the bottom off to 3/4" and mill .100" off the lower edge of the slot in my quick change tool holder to get it low enough to work. But it works good.
Grevers
Reviewed in the United States on April 22, 2018
Great tool for the price. Inserts are identical to Shars brand. Inserts alone are $60 from shars so holder and tool are only $50 well worth it. It’s no iscar but for the price it’s great
Recommended Products
$16.50
$ 6 .99 $6.99