Your cart is empty.
Your cart is empty.Product Description
Stable Load-Bearing Ability
The 2 bars Hold up to 700lbs ( 3 bars hold up to 1050lbs) when racks are properly installed and weight is distributed evenly.
Premium Material
- 1.2" diameter cross bars
- 11 gauge (3.2mm actual) high strength steel mounting base
- This unit is Powder-coated with weather resistant paint.
Security & Stability
Our side rope hook design makes it easy to carry objects, while the rubber seat effectively protects the roof from scratches and damage.
Flexible Structure
- The extendable design also makes it compatible with different van roof Width ranged from Min.35" - Max.57"
- Simple construction for fast & easy assembly
DX36 Truck Cap Rack
Comparison Chart
Steel | Material | Steel |
2 Bar | Quantity | 3 Bar |
700lbs | Weight Limit | 1050lbs |
35" ~ 57" | Adjustable Length | 35" ~ 57" |
Steel | Material | Aluminum |
2 Bar | Quantity | 2 Bar |
700lbs | Weight Limit | 500lbs |
35" ~ 57" | Adjustable Length | NO |
Steel | Material | Aluminum |
2 Bar | Quantity | 3 Bar |
700lbs | Weight Limit | 750lbs |
35" ~ 57" | Adjustable Length | NO |
- DX36-T Truck Cap Rack
- ADX32 Aluminum Cap Rack
- ADX32-T Aluminum Cap Rack
Caroline Kay
Reviewed in the United States on February 8, 2025
Installed these on my fiberglass truck cap 3 months ago! Daily work truck with ladders and occasional lumber transport! No complaints! Should last as long as I plan on having the truck!
John Rogers
Reviewed in the United States on January 31, 2025
Perfect They work great. Thanks
Holly Elizabeth
Reviewed in the United States on August 6, 2024
Great quality comes with hardware for angled arches for different style truck bed caps! Absolutely awesome 100% recommend!!!
Brian
Reviewed in the United States on July 1, 2024
I just finished helping my sister install this rack on her pickup truck topper. The powdercoat is very well done, the racks are sturdy and well made and the hardware is high quality. There are even extras in case you lose a bolt. Directions are minimal but not necessary, as the installation is basic and obvious to anybody who has ever used a drill and a wrench before. She is super happy with the ladder rack (which will double as a Kayak rack on weekends).
Kevin mac
Reviewed in the United States on June 19, 2024
I drilled holes in my top and installed myself, I haul a ladder and a big tube on top most of the time, they're not the prettiest, but they work great, I had a ladder rack and bought a shell, I have a four for f150 so the bed is super short, this way I can still haul my canoe out long lumber
david
Reviewed in the United States on December 31, 2024
Fit great and would do this again
Pirate Contractor,
Reviewed in the United States on November 8, 2024
I ordered a set of 3 truck Van,Cartop racks.I installed them on a ARE 8' Truck Canopy.A set of 3. To displace the weight across the canopy.These are light duty racks. They are not made to hold a-lot of weight. One thing I noticed right off they do come with a plate to install on the inside of the roof skin. I bought a extra aluminum 1" square tube that I installed across the Roof ribs on the inside of the roof to distribute the weight. Otherwise the racks will sit directly on the roof skin. And most likely will damage the roof skin.I also used boat bedding compound under the rubber mounts on the racks to better waterproof and hold the racks in place .Locate the width of the racks first. Then attach the extra tubing inside the roof first before you mount the racks. Then Drill through the extra tubing to mount the rack using the carriage bolts included. And also use the steel plates. You may need a spacer between the new tube and the roof skin. Use Caulking here also. This will help to stiffen the racks to carry loads on. If you don't add the extra stiffener you may dent your roof of your canopy. Another way is to mount a long piece of 3/8" or 1/4" thick x3" wide x long length of Canopy piece of aluminum . Along were the racks mount outside on the roof embedded in boat bedding compound. Then Dill through this to mount your racks this will help also.Good luck. They are not to bad for the cost. Come with Tues on them.
Chris Cober
Reviewed in Canada on April 14, 2024
Pros: Works well for plastic kayaks thanks to the high wings. I use it for.light lumber and trim pieces for work.Cons: Noisy, starting to rust as you can see in pics.This is a cheap-looking utility item.. price was good.
Ryker
Reviewed in Canada on October 21, 2021
Easy install. Very happy with the product would recommend to anyone want a rack for all purposes
Jamie Forish
Reviewed in Canada on March 26, 2020
perfect product to what I was looking for
Donald Welch
Reviewed in the United States on February 16, 2019
I wasn't sure what to expect at such a good price.... the reviews for the most part were good so I ordered a set. I was pleased with the construction and weight of the product and having tapered gaskets for the top side was a real plus. These were installed on an A.R.E. cap mounted on a Dodge Dakota pickup. Once I established the best place to mount the rear rack, I was able to pull measurements off it to square up the forward rack. Te side to side was a little trickier but holding a straight edge along side the cap to give something to measure off of was key to getting them aligned evenly on top. Haven't hauled anything on the rack yet but am confident they will stand up to their rated load.
brayden
Reviewed in Canada on November 6, 2019
Works great for what I need it for.
Recommended Products
$209.99
$ 99 .00 $99.00