Your cart is empty.
Your cart is empty.Product Description
The difference between moving the blade and not being able to move; at L cuts/ U cuts/ Z cuts.
Option A, Move the metal slide before cutting the SPC floor, easy to shallow cut.
How to cut easily cracked vinyl plank floor - SPC floor ?
Option B;
Each shallow cut is 6" long x 1/16" deep for spc flooring. (1~2mm deep)；
This way (6-inch length not too much force, easy control your arm strength), the floor won't crack.
Each shallow cut is 6" long x 1/16" deep for spc flooring； (1~2mm deep)；
9" Replacement Blade LVP-230B
- Scan QR code to get it;
- Sharp, durable and affordable；
- Please replace the blades promptly when they become dull, let alone our blades are cheap. Improve the service life of the cutter.
- 9" Blade-LVP230 - - Amazon.com
If the blade holder is suspended and does not reset when the new cutter is opened.
Only two positions 1 and 2 will cause the blade holder to hang;
please add lubricating oil to the long hole 1 on the side plate-edible oil can also be used;
The nut at position 2 may be tightened too tightly!
Richard Ross
Reviewed in the United States on January 3, 2025
This product did not cut clean, it left a rough edge which is usually covered by molding but I still expect better preference.I returned it for a refund.
La Duquesa
Reviewed in the United States on January 17, 2025
The hubby had a project for our laminate floors and this helped him make it easier. smooth cut
Chad Cerrone
Reviewed in the United States on January 14, 2025
this is sharp enough to cut a piece of paper. Work well to cut flooring.
DallasMom
Reviewed in the United States on September 18, 2024
After installing quite a bit of LVP flooring, I decided I needed to try one of these cutters to save the time of walking in and out of the house to cut. I specifically wanted this one, as I thought the U and L cuts would be a great way to speed up the process around doorways. This saw easily cut the flooring and does save time, but it did not perform well for the U and L cuts because you have to basically unscrew and remove the blade in order to get just a partial cut. The straight cuts and the angle cuts were its best feature and it performs those well. I did find it hard to see the blade, know exactly where the cut was going to be and getting the attached side guides to stay screwed in one place was a big pain. Yes, I would use it again and yes it will save you time.
OSU
Reviewed in the United States on July 3, 2024
Worth the money! Saved me a lot of time and time is money! I did not have to use any power tools to have my bathroom floor installed in a weekend. Sharp, easy to use and portable. Wished I had this sooner for the other installation. Just make sure the size fits your needs.
Sven Müller
Reviewed in Germany on November 29, 2024
Ich habe nach einem Schneider für Klickvinyl gesucht und wurde fündig. Es schneidet sauber und vor allem auch in Längsrichtung. Nach 50qm schneidet es nach wie vor sauber und ohne Probleme.
Kenny Leung
Reviewed in the United States on October 4, 2024
DECIDED TO GET THIS JUST IN CASE I GOT TIRED OF USING A RAZOR BLADE...MAKES REALLY GOOD CUTS AND EASY TO USE. DEF A MUST IN HOME IMPROVEMENT. AT THE TIME TO RECHECKING FOR THIS PRODUCT, IT WAS SOLD OUT AFTER I GOT IT..SO GLAD I DID. THANK YOU
Cagekicker
Reviewed in the United States on October 21, 2024
UPDATE!!!! I have now had this product for 2 weeks, and used it several times, I also replaced some existing vinyl plank flooring pieces and was able to use this and cut perfect straight edges going the long way.. love this machine, yes, the larger one would have been a little better, but for what I need and needed, this worked a lot better than I thought it would !I was having a hard time cutting straight lines cutting the long ways on luxury vinyl planks.. I should probably get the 13" one but the 8" one works just as well. I only have used in on 4 or 5 boards.. but so far so good. I did a few practice cuts on scrap boards before on the boards I was using. but so far impressed!
Gortech Services
Reviewed in the United Kingdom on November 7, 2023
...based on other not so complimentary reviews.This little tool save me hours of cutting manually & the mess using a table saw was making. I wish I'd bought this at the start. This was able to deal with 6mm LVT without a hitch & with minimal effort.
wow
Reviewed in Germany on November 28, 2023
oky
MR. M HASAN
Reviewed in the United Kingdom on September 1, 2022
Couldn't even tolerate normal laminate floor board! Need to return it, waste of time.
Customer
Reviewed in the United Kingdom on March 15, 2021
The handle is too thick for the hole 🕳 and there is no screw provided!I just can't use it because of that ...🤦♂️
M. Van Cleave
Reviewed in the United States on September 11, 2020
I had other friends that used various saws to cut their laminate and vinyl flooring. Always making a mess or having to make trips to their garage or outside of their house to make the cuts. With the size of project I have to do it is so nice to have this right in the same room where I am doing the work. No mess, no fuss, just line up where you want the cut and press down on the handle. Easy to throw together and it is very light. It looks cheap, but it does a great job.As a point of improvement, if there was a red line or something indicating where the blade comes down on the side or platform that would make it even better, but other than having to be sure exactly where the blade is going to cut this is a terrific tool for the project I am doing.
Recommended Products