Your cart is empty.
Your cart is empty. 8664RP Replacement Motor for NuTone 8663RP B Unit
Motor 8663RP Assembly#S97017705 for Nutone
S97017705 motor blower wheel assembly for Nutone Spec: 100CFM; 3.5 Sones; 1.9Amps; Rotation = CCW; 3.3" Diameter Motor; 2 Mounting Studs Opposite Shaft End;2-Prong 120 Volt plug
This 8664rp replacement motor for NuTone 86933000 motor only JA2B104N
The S97017705 fan motor rotates counterclockwise
Package Including: Fan motor assembly for NuTone S97017705 includes motor and blower wheel
This 8663rp b unit replacement fan motor assembly for Nutone S97017705 compatible with following NuTone/Broan ventilation fan models:
NuTone 8663RP
NuTone 8664RP
NuTone 8673RP
NuTone 671R/ NuTone 672R
Broan 750 fan/ Broan 751 fan/ Broan 752 fan/ Broan N750 fan
NuTone VL3668RP/ NuTone VL3668RLG/ NuTone VL3668RMAB/ NuTone VL3668RMBR/ NuTone VL3668RMSA
NuTone 8663RF/ NuTone 8663RFT/ NuTone 8663RLG/ NuTone 8663RMS/ NuTone 8663RMSA/ NuTone 8663RMAB/ NuTone 8663RMBR
Easy to replace a noisy fan:
Pop out covering, unscrew, unplug, pull old one out, set new one in, plug in, reassemble outer case and turn it on.
No particular skills or tools required, just plug and play,the 8664rp replacement fan motor for NuTone 97017705 slipped right in to existing vent mounting frame.
Cost-effective:
Replacing bathroom fan motor replacement for Nutone 8663rp b unit in an old fan eliminates the need to disassemble the entire unit system or cut/patch the ceiling to fit the new case
Replacing the 8663RP motor for Nutone instead of the entire fan motor system is economical and practical and much easier than removing the enclosure, reconnecting the exhaust and installing the entire motor assembly.
Durable and long-lasting:
The new blower wheel replacement for Nutone S97017705 runs smoothly and quietly, firmly fixed on the motor shaft is not easy to slide, it can effectively reduce noise when working and prolong the life of the ventilation fan for Nutone.
The replacement bathroom fan for Broan Nutone 8664rp allows enough air flow in the bathroom/shower without worrying about moisture or fogging, effectively preventing corrosion and damage.
Mike Holczer
Reviewed in the United States on February 2, 2025
Our old fan reached the end of its life and was getting noisy, so looked at the model number and order this replacement. I wasn't careful and lost the machine screw that holds the unit on the side with the plugs, and the replacement didn't come with one, so had to run out to Home Depot to get one. Other than that, it was very easy to install and has been working great since.
Jodie
Reviewed in the United States on January 28, 2025
Bought this to replace the one in our bathroom. It works great and is very quiet.
DMS
Reviewed in the United States on January 20, 2025
This part fit perfectly into our old unit and has run well. It did not come with new screws so hang in to the original ones!
kjc9901
Reviewed in the United States on January 10, 2025
I bought this to replace a 20 year old Broan-Nutone 8664RP Fan motor. It fit perfectly and is even quieter than the original. It took less than 5 minutes to fully install. 100% highly recommend!!
Brandon P
Reviewed in the United States on July 16, 2024
Had to replace mine because of the bushings deteriorating. It fits well however the fan doesn't have curves like the original to actually pull the air well, also noticeably smaller. Instead it just pushes it. Original spins noticeably quicker. The time it took to install and now it's used I can't return it so $60 wasted. Label said .19 amp while the OEM says 1.9, most likely a misprint. The bushings are very small so if the motor is crooked even a bit it makes a terrible noise. The wingnut did not fit the screw to hold the lamp base one and they supply a lock washer that cannot be used because it just strips the bolt out. Be aware of this if you do purchase and install if you absolutely need this. No instructions either however it's a pretty straight forward install. Try to find OEM first.
Cal F.
Reviewed in the United States on July 12, 2024
Fan was an exact replacement. It’s just louder than the original Brian fan which lasted 30 years.
Droneted
Reviewed in the United States on December 28, 2024
My bathroom fan was so noisy I couldn’t use it. Sounded like it was blowing apart. I bought this replacement. Perfect fit. Took me 5 minutes to install. All I needed was a screwdriver and a crescent wrench. It is so quiet and smooth running. I highly recommend it
Pat
Reviewed in the United States on December 16, 2024
Good quality item works great
Recommended Products
