Your cart is empty.
Your cart is empty.4.4 out of 5 stars
- #42 in Computer Networking Switches
Product Description
Fanless design
Fast heat dissipation, no noise.
Durable Metal
Lightweight rugged metal housing design makes it safe to use in various environments.
LED Indicators
LED indicators for each port，Quickly check Working status and troubleshoot ports with lights for each.
Damage to one port does not affect other ports
When a port in the poe port is damaged and cannot work normally, other ports will not be affected and can still work normally.
Normal work under water
When the damaged network cable encounters water, it will not be short-circuited. It will not cause the equipment to fail to work normally. The STEAMEMO switch can maintain normal work stably and has strong anti-interference ability.
Make crystal head
When the power is on, you can use a tool to cut the network cable and make a new registered jack, and then it can work normally.
support active poe devices&passive poe devices&non poe devices
pay attention!
Note: STEAMEMO active POE switchs support passive poe devices&non poe devices, but when the switch is directly connected to passive poe devices or non-poe devices, the switch can only transmit data and cannot power the device, so the device needs to be powered separately. Or use an active poe splitter between the switch and your passive poe device and non-poe device,So that the switch can transmit data and electricity at the same time.
- This is very important and must be noted！
Supported devices
support active poe devices&passive poe devices&non poe devices
The STEAMEMO POE switch is an active POE switch, as shown in the figure, it supports active poe devices, and it can work when connected to your device. It also supports passive poe devices and non-poe devices, But please note: If your device is a passive Poe device or a non-Poe device, the switch can only transmit data and cannot power your device,so the connected device needs to be separately powered. Or you can use it with active poe splitter.
- Up to 30W each poe port.
- Turn on the expansion switch, the maximum transmission distance reaches 250 meters (820ft).
- when connecting non-poe devices, we use poe splitter between the switch and the device !
Multi-scene and multi-purpose
Surveillance
Work with IP Cameras, such as store.
Wi-Fi Coverage
Works with wireless access points, such as Hotels, office，cafe, etc.
Conference Call
Works with IP telephones, such as an office telephone network.
Sans
Reviewed in the United States on January 21, 2025
The seller replaced the switch even a few weeks after the warranty expired. Original POE switch worked for one year and one week connecting two cameras to the main router. It simply failed to connect two POE cameras. The new switch is working perfectly. Thank you for replacing and standing behind your product.
frabor
Reviewed in the United States on January 2, 2025
It works! It's powerful. It can be grounded. It's perfect for outside installations. I use them as a cable extender and a grounding point when I when I install external cameras. The switch has a very high protection against search 4 kilovolts and a grounding point. All metal construction highly recommended.
AndMe
Reviewed in Canada on July 31, 2024
So far works as expected
Jorge L.
Reviewed in Mexico on March 5, 2024
Excelente
Pepe Kuri
Reviewed in Mexico on November 14, 2024
Muy buen producto. Mis cámaras PoE marca Meriva y Dahua, incluyendo una cámara inteligente que fotografía placas de automóbiles, funcionan al 100% y la verdad es que los compré a muy buen precio. No he instalado cámaras en los 8 puertos al mismo tiempo, pero por lo que veo no tendré problemas en el futuro con este switch.
Jason Wells
Reviewed in the United States on August 4, 2023
As a networking enthusiast, I recently purchased the 8 Port Gigabit PoE Switch with 2 Gigabit Uplink, and it has exceeded all my expectations! This unmanaged switch is a true gem for setting up a reliable and efficient network infrastructure.The switch's 8 Gigabit PoE ports, along with the 2 Gigabit uplink ports, provide ample connectivity options, making it perfect for my home office setup and small business needs. The 802.3af/at compliance ensures seamless integration with my PoE-enabled devices, eliminating the need for additional power adapters and clutter.One of the standout features is the built-in 120W power capacity, which easily handles all my power-hungry devices, from IP cameras to access points, without any hiccups. I've been using it for several weeks now, and it has operated flawlessly, delivering consistent power and data transmission.Setup was a breeze, as the plug-and-play design allowed me to get everything up and running in minutes. The sturdy metal construction adds a sense of durability, and the compact size doesn't take up much space in my networking cabinet.Overall, I am extremely pleased with the performance and reliability of this PoE switch. It has become an essential part of my network, and I would undoubtedly choose it again without hesitation. If you're in need of a hassle-free, high-quality PoE switch, look no further – this one gets the job done brilliantly!
ALEJANDRO
Reviewed in Mexico on December 17, 2023
Producto robusto y estable excelente
Bob in Central Oregon
Reviewed in the United States on December 10, 2023
Like everyone I'm sure, space in network cabinets is precious. This POE switch allows me to eliminate a separate stand-alone POE injector panel for security cameras and Wi-Fi AP's, consolidating those functions plus the switch into one box. Yes, I'd be a lot happier if there were rack-mounting ears available, rather than sitting it on a rack shelf.I bought this switch on a pre black-Friday sale, and in spite of the several reports of failures it was still worth the gamble. I placed it in the cabinet and powered it, and connected the LAN port to our existing switch. After two months, I decided today to actually plug a couple non-critical devices devices into it. They powered up nicely and seem to be functioning. I'll slowly migrate five other POE devices to it, and of course watch for failure signs that other report. With two 100MBIT cameras plugged in, there should be almost no strain on either the data or POE delivery. After I get a few more cameras moved over, I'll look harder at traffic load and power delivery.This box is compact, has a built-in power supply so no external brick, and fits nicely in the cabinet. Surface temp on the case is about 105ºF, about 25º above ambient in the cabinet. The small surface area of the box at that temp offers no worries so far. The fan-less design is a plus, so long as those temps don't get excessive. It's close to the bottom of the active device stack in there so should be OK. I've seen no noticeable increase if top of cabinet temps since adding this switch, although it's not close to rated data or POE loads. I'll continue to monitor as loads are moved from the existing injector-only device.The review will be updated if things change significantly. My initial impression is that it's a good device for our needs. The great sale price was a bonus.
EVD671
Reviewed in the United States on March 12, 2022
I purchased two of these in January 2021, and have put one of them to use in February 2021. I use this switch to provide connectivity and power to four Reolink RLC-410-5MP security IP cameras. I live in a location with tropical weather climate (i.e., warm weather all year long, ambient temperatures between 78F-89F). This switch is housed inside a plastic junction box with no external ventilation. Providing this information to give an idea of the operating conditions and environment.After about 1-year of use, this POE network switch is still working as intended, and reliably. I had reservations about purchasing this switch over other well known brands. What ultimately convinced me was the price point of this switch and the two uplink ports, effectively making this a 10-port switch with 8 ports having POE+ capability. The other well known brands are typically sold as 5-port switches. The next selling point was that the other well known brands typically only have POE power output (15 watts per port), while this switch provides POE+ output (30 watts per port). While 30 watts is not required for the Reolink cameras that I am using, I wanted to have the capability to support higher wattage cameras, such as those with PTZ capability, should I decide to upgrade or replace the existing cameras. Finally, this switch offered all these additional capabilities at a price point that was lesser than the other well known brands. It was a risk to take even though it was cheaper, as this decision could have turned out to be more expensive if I ended up having to replace this switch with one of the well known brands. However, after about 13 months of use, this switch is still performing reliably!I haven't performed any benchmarks to confirm the Gigabit capability of this switch. The video feed from the Reolink cameras work flawlessly, but the data produced by the four cameras are not sufficient to saturate the gigabit capability of the switch. While I don't doubt the switch's gigabit capability, I also don't have data to support and confirm that the switch is, in fact, capable of gigabit transfers.I haven't even checked on this switch since I first powered it on. It has been maintenance free up to this point.The second unit that I purchased was for the purpose of providing an immediate backup unit, in the event that the first unit became inoperable. However, the second unit has just been sitting in storage gathering dust.Overall, my experience with the switch has been positive during the 1-year of use. I would buy this product again, for future projects that I may have that require POE+ capability.
Recommended Products
Supermicro SSE-T7132S 400Gb Ethernet Switch Offers 32x QSFP-DD Ports Regular Airflow (Front to Back)
$14,999.99
$ 99 .00 $99.00