Your cart is empty.
Your cart is empty.Product Description
CHAIN BONDING & BREAKS REPAIRED
CHAIN BONDING & BREAKS REPAIR STEPS:
- Apply appropriate amount of powder ( thickness ≤5mm) on the connection area
- Apply the adhesive onto the powder until the powder no longer absorbs the adhesive
- Build up in layers until it’s thick enough
- Metal bonding may take up to 30 seconds to bond. Glue will achieve maximum strength in 24 hours
CRAFT MAKING & HOLES REPAIRED
CRAFT MAKING STEPS:
- Apply the adhesive on the connection area
- Apply appropriate amount of powder covering the adhesive in the connection area
- Apply the adhesive again onto the powder until the powder no longer absorbs the adhesive
- Wipe or blow away any remaining dry welding power
WEEDING MACHINE HOLES REPAIR STEPS:
- Apply appropriate amount of powder on the broken hole area
- Apply the adhesive onto the powder in 7-10 seconds
- All done!
CRACKS REPAIRED （with grey powder）
CRACKS REPAIR STEPS:
- Tape it on the obverse side
- Apply appropriate amount of powder on the cracks
- Use the stick provided to flat the powder shape
- Drop adhesive, bond it
CAN BE SANDED OR PANITED TO COMPLETE THE REPAIR
HOLES ON MOTORCYCLE FAIRINGS REPAIR STEPS:
- Tape it on the reverse side
- Apply appropriate amount of powder on the opposite broken hole
- Use the stick provided to flat the powder shape
- Apply the adhesive onto the powder until curing
- Then Sand flat with sandpaper
- Paint it with suitable color
- All done!
CAN BE DRILLED TO MOUNT THE SCREWS
SCREW SLIP REPAIR STEPS:
- Apply appropriate amount of powder on the screw hole
- Insert the screws
- Apply the adhesive until curing
- Screw out to form a new thread
- All done!
KIT INCLUDED AND APPLICATIONS
WARNING AND TIPS:
- First, identify the type of repair you will be making and gather any appropriate materials you may need such as masking tape, cleaning materials, and others. Make sure you have al the tools and accessories included in the kit for the whole repair.
- Avoid any direct skin contact with the adhesive.
- When the adhesive combines with the powder, it will produce a lot of heat and gasses that can cause slight irritation within 10 seconds.
- If the repair is not thick enough, repeat step.
- Adhesive is not designed to be used on Polyethylene, Polypropylene, Teflon, Silicon, Paper and Cloth.
- Make sure not to dip glue nozzle into filer power. This may cause glue to neutralize.
- KEEP OUT OF REACH OF CHILDREN!
Ollie
Reviewed in the United States on August 5, 2024
When I went to use product the liquid hardening agent had already hardened. Total waste of money.
William Mickler
Reviewed in the United States on August 31, 2024
Very strong glued the lid back together on the front of my quad
Jaime Hernandez Muñoz
Reviewed in Mexico on May 24, 2024
Es un pegamento muy fuerte lo recomiendo ampliamente fácil utilizar y se puede pulir.
Roy Moore
Reviewed in the United States on November 6, 2024
It took 5 seconds to do what need it for, great product just follow instructions.
Sam Spade
Reviewed in the United States on January 29, 2024
Used to repair programmable car ignition key. Plastic broke off around metal key. Used this to repair and replace missing pieces of plastic. Cures very hard. Had to file down excess I applied, and noticed it was stronger than original plastic, and bonded exceptionally well. Very impressed. Holding strong!!
Fataitaa
Reviewed in the United States on August 9, 2023
The media could not be loaded.
Karen M.
Reviewed in the United States on August 29, 2023
Used on so many things and works great
danny robinson
Reviewed in the United States on December 13, 2023
works great will buy again
Mark Stevenson
Reviewed in the United States on December 23, 2022
I used this stuff under another brand many years ago in another country, and really missed it. Its a super glue with rock hard filling powder that sets instantly. Sticks crazy good to everything I have tried it on.
Recommended Products