Your cart is empty.
Your cart is empty. Oxygen 02 Sensor Socket 7 Pcs Tool Kit – 22mm (7/8in), 27mm, 29mm – All Vehicle O2 Removal and Installation
Package Includes:
1 pcs 1/2'' Drive x 27mm (12 point) oil pressure sending unit socket.
1 pcs 1/2'' Drive x 29mm (6 point) pressure/vacuum switch socket with slot. Oil pressure sending units on late 1980 and mid 1990 GM vehicles. Designed to be used with 1/2" drive tool.
1 pcs 1/2'' Drive x 7/8''or 22mm (6 point) long oxygen sensor wrench socket with slot.
1 pcs 3/8'' Drive x 7/8'' or 22mm (6 point) vacuum switch socket with slot.
1 pcs 3/8'' Drive x7/8'' or 22mm (6 point) vacuum switch socket with slot.
1 pcs 3/8'' Drive x 1-1/16'' & 1''or 27mm (6 point) oil pressure sending unit socket. Special deep design fits oil switches up to 2-5/8". Can be used with a 3/8" drive ratchet or 1-1/8" wrench.
1 pcs 3/8'' DR x 7/8''or 22mm (6 point) short oxygen sensor wrench socket with slot.
Chris
Reviewed in the United States on February 20, 2025
Very handy to have the set. Worked good for my 4runner
Asia
Reviewed in the United States on February 13, 2025
Looks lightweight but is very heavy duty
glen
Reviewed in the United States on February 10, 2025
Worked for me, wasn't expensive, and it got here pretty quick. 5 stars because it's exactly as advertised.
proracedriver5
Reviewed in the United States on January 31, 2025
I used this socket to replace the oxygen sensors on my 02 Ford F150 and this socket made the job very easy, looks very durable
Jeremiah D. Ostrosky Sr.
Reviewed in the United States on September 12, 2024
So rather than renting one from the local auto parts place I figured I'd just buy the oxygen sensor socket, especially at this price. The socket itself fit the sensors, both old and new (which were different brands) well enough, BUT the 3/8" drive opening is INCREDIBLY TIGHT FITTING. So much so that once I actually managed to get the socket ON my wobble head ratchet, I ended up having to use a mini crow bar to get it OFF again. At least in my semi-humble opinion, that seems like a little too tight of a tolerance to me. I ended up with it on the wobble head ratchet after trying, and failing to get it on to both a Duralast ratchet and breaker bar and a Stanley ratchet. The results were the same with the 1st three tools I tried, and that was that I wasn't actually able to get the socket on to the 3/8" square drive. I only succeeded getting it onto the wobble head with a few good whacks on it, and I've already explained how getting it off went. So, minus 1 star for the fit, and hopefully I can just file the inside down a bit and improve that, but for $7 should I really complain?
Al
Reviewed in Canada on July 21, 2024
Fit in good worked like a charm
Richard Boice
Reviewed in Canada on July 11, 2024
I ordered an oxygen sensor kit picture showed kit of 5 pieces. Now picture and description have changed. If your just looking for this one socket your good.
TCH
Reviewed in the United States on November 26, 2024
The socket wrench or extension cutout is too small, making this tool unusable. Also, the walls of the socket that goes over the sensor are too thick and prevents the tool from fitting properly over the sensor hex nut in tight quarters, like on the Hyundai Sonata that I was working on. This tool is useless garbage.
Alex Vaos
Reviewed in the United States on November 22, 2024
The 3/8 drive doesn't fit. I had to smash the tool onto a 3/8 to 1/2 adapter, and now the adapter is stuck. I tried grease/oil to get it out and I can't.
GREGORIO GERMAN VILLEGAS ALCANTAR
Reviewed in Mexico on March 27, 2023
calidad aceptable, cumple con su cometido
DunerJim
Reviewed in the United States on September 9, 2022
In 50+ years of working on my own vehicles, I’ve never had to remove an O2 sensor. When the need arose I didn’t think I needed the highest quality tool. This one had OK reviews and the price was great. As another reviewer said the 3/8 square for the drive was slightly under sized. It was very hard to get my name brand ratchet into the drive hole. 10 minutes with a small file allowed me to relieve the hole enough that it fit properly. Another reviewer mentioned that the hex was a little bit large. I would agree with that but it didn’t present a problem for me. The one problem I had was that the hex was only cut probably 1/4 of an inch into the tool and after that it was just round (see photo.) this made it tend to pop off the sensor as I was trying to turn it. If the hex was a little deeper I think the tool would’ve been easier to use. But I was able to use it. I had to use two hands to hold the tool onto the sensor. This was somewhat difficult because my hands completely filled the available space.
Darlene M.
Reviewed in Canada on July 22, 2022
it helps get to the O2 sensor without having to cut the wires, great for cleaning and re-using the same O2 sensor
jose luis sanchez
Reviewed in Mexico on October 25, 2022
TIENE EL TAMAÑO PERFECTO PARA REALIZAR LA REPARACION
Recommended Products
