Your cart is empty.
Your cart is empty.Product Description
CORSAHD 4K@60Hz HDMI Splitter 1 in 2 out supports Ultra HD.
CORSAHD HDMI 2.0 Splitter reliably distributes one HDMI source signal to two HDMI outputs.
Both HDMI outputs can down scale 4K signal to 1080P.
Packing List:
- HDMI Splitter x 1
- USB Power Cable x 1
- Pin key for pinhole x 1
- User Manual x 1
EDID & Scaler
CORSAHD HDMI Splitter 1 in 2 out 4K@60Hz 4:4:4 8bit HDR Dolby Vision compatible, HDCP2.2, bandwidth up to 18G/bps.
Supports 4K HDR TV & 1080p Capture Card work in sync; Dolby Vision & Atmos work in sync. Upgrade Firmware.
Simply setting HDCP, Scaling and EDID through pressing panel button.
Does NOT support HDMI ATMOS 7.1 & 5.1ch AVR work in sync. It is not a audio down mixer.
Does NOT support 4K60hz & 1080p120hz work in sync.(Both display devices should remain same refresh rate)
Wide Compatibility
Supports most gaming consoles and display devices up to 4K@60Hz.
EDID Setting
- 4K 7.1: 4K@60Hz_4:4:4_Dolby Vision_Dolby Atmos_7.1CH_3D_HDR
- 4K 5.1: 4K@60Hz_4:4:4_5.1CH_3D_HDR
- COPY1: Learning EDID from HDMI OUT1
Downscaler
- Position 1 for OUT 1, OFF: Signal pass through, ON: Down Scaler from 4K to 1080P.
- Position 2 for OUT 2, OFF: Signal pass through, ON: Down Scaler from 4K to 1080P
- CAN NOT down-scale Refresh rate and Dolby Vision
- Please TURN OFF Scaler when playing 4K HDR Dolby Vision
Alex G
Reviewed in the United States on March 11, 2025
Works great to bypass the signal from fire stick to el gato and then computer to stream
Customer Review
Reviewed in the United States on February 12, 2025
Had no issues using this one.
Sam MT
Reviewed in the United States on January 7, 2025
I could never figure out why some HDMI splitters could split an image from the cable box but others couldn't even when labeled Hdcp bypass. This little magic box does the trick. I sent HDMI signal from TiVo box to the input at 4k, port1 set to 4k output to my home theater receiver to broadcast to my 4K TV and port2 is set to downscale to 1080p to my whole house modulator that will broadcast the signal via coax to all the tvs on channel2. No glitches or flashes when handshaking between devices.
Man in MN
Reviewed in the United States on August 27, 2024
Does the job of splitting an HDCP video stream between two TV's. My kid and wife watch a few shows together, but if one happens to be cooking then they'd miss out. I had a much older splitter doing this job and it failed a couple weeks back. Bought this to replace it.Plugged it all in, turned it all on, and it just works. Now they can watch the same Netflix show at the same time on two different screens.No clue how long it'll last, but it was a good price so I'm giving it a shot.
adna
Reviewed in the United States on June 4, 2024
I have a 4 in 1 out hdmi switch and use this device to connect a 4K Apple TV, a M1 Mac mini, a Firecube 2nd generation and an old blue ray player to a 4K Vizio TV and an old 5.1 Yamaha Av receiver which can only do 1080p. So far it works great using Edic pass through and downscaling on one of the HDMI outputs. There are very rare picture and sound dropouts but this could be caused by any of the components. I was using the remote learning function to integrate the av receiver with the fire cube and the Apple TV to make up for the lack of cec pass through.
John D
Reviewed in the United States on May 30, 2024
Does not work on Xfinity XG1v4. Get sound dropouts no matter what you do setting it to EDID or any other setting and even pushing the update button on the device. It just does not work for that Xfinity box.
ALAN-MICHAEL E MAYWEATHER
Reviewed in the United States on December 18, 2024
The entire reason I purchased this was to act as the bridge between an HDMI switch and my elgato capture card. Every other device worked flawlessly through my old splitter -except- my Playstation 3 (notorious for this behavior).Arrived on schedule, packaging is compact and unassuming with very little waste. Contents are the unit, its USB A to micro power cable, and a small instruction manual with the configuration settings detailed.No setting changes neecessary, I simply replaces the old unit with the new unit and opened OBS with the Playstation 3 turned on. Instant signal. Instant 5 stars.
Lamb0985
Reviewed in the United States on November 28, 2024
4K60 HDR works fine for two outputs if bit rate is set to 8 bit on the input device, but I never could get Dolby vision to output correctly on two devices.
Samuel Russo
Reviewed in Australia on April 1, 2024
Worked instantly with my PS3 to bypass the HDCP Lockout prior to connecting it upto my scalar.
Recommended Products