Your cart is empty.
Your cart is empty.THESE PADS ARE 1" THICK WITH RIBS ON TOP AND BOTTOM Has a solid cross-ribbed design (1" thick). Each of the pads has a 5/8" hole in the center so that you can easily anchor through the center of the pad. These are perfect for use with air compressors, HVAC, Machine, Fitness equipment, Washer and Dryer, appliance, speaker, garage door, furniture, table, bookshelf, bed frame and all sorts of heavy duty equipment. Using these vibration pads will cut down on operating stress, equipment wear, and noise with your machinery. Made from high quality elastomeric materials Compounded for excellent resistance to aging, compression set & oil Recommended maximum loading capacity: 60 lbs per square in, Max 960 lbs per pad
David
Reviewed in the United States on March 3, 2025
These are big square pads with a hole in the middle. I'm not sure how the hole would be used, because if you put a bolt through it with a washer, the washer and screw head would be sitting on the floor. For that application you should route a wider area on one side of the hole, put your washer there, then put the screw through the washer. Fortunately the material is durable and you can readily do that.Alternatively you can just set something on it and rely on friction to stop movements. That will work in many applications.
Dwight Bumgarner
Reviewed in the United States on January 4, 2025
I got these rubber pads to dampen vibrations caused by brushed DC motors in a project I'm working on. They were much too large for the pre-drilled holes (in the middle of the pads) to fit out of the box, but the rubber is so dense that drilling new holes was very simple. Once the new holes were drilled they fit perfectly and have been solid ever since. I highly recommend these even if the hole in the middle won't fit, they can be modified!
Jay S
Reviewed in the United States on December 4, 2024
These are great, very good at separating a large, heavy item that can benefit from vibration or sound isolation. I used them with my 3D printer with decent results. The only thing to note is that they are not as pliable as I hoped for more gentle movements since its a very dense rubber, and they also seem to have a very strong off-gassing smell of the vulcanization process, so keep this in mind depending on your use case.
David B.
Reviewed in the United States on December 28, 2024
Arrived quickly and as described! Solid rubber pads that will not deform easily as with EVA layered pads. Got these to modify/adapt portable generator to give additional lift after getting larger wheels. The pads are 1 inch thick and work perfectly to re-level my generator. There is always a smell with rubber products and these pads are no different. After a few weeks the smell will go away but because it is being used outdoors the smell is not an issue. Product is solid and durable and will work well for my needs. My only issue is with the cost. For a small rubber product, the cost seems a bit high. I didn't find pads of the size I needed at a better price but they may be out there.
Tactical Potatoes
Reviewed in the United States on December 12, 2024
These anti-vibration pads from All Tool Depot provide a practical solution for stabilizing machinery and reducing noise. Each pad is made from durable rubber, designed to withstand heavy use. They are suitable for both home and industrial settings, fitting under a range of items from washing machines to heavy workshop equipment. While they perform effectively, their size may be a limitation for larger applications. However, for general use, they successfully dampen vibrations and help create a quieter, more stable environment.
Magpie
Reviewed in the United States on November 18, 2024
Rather than for the their intended use, which is to keep washers and dryers from vibrating and making lots of noise, I bought these to use on some DIY speaker stands that I was building. The idea is to keep the vibrations from the speakers from radiating down into the floor, which makes them sound worse. These pads are very heavy duty, thick, and extremely firm. They have some treads on the bottom that help them stay in place, and holes through the middle that I assume are meant to connect up with the feet of your washer/dryer. While I can't say for sure that they would do the job for which they were intended, they did the job that I intended for them so well that I would be quite surprised if they didn't help eliminate vibrations from washers and dryers as well.
Recommended Products
