Your cart is empty.
Your cart is empty.Product Description
ANDONT
- Fully Assembled LED Andon Tower Stack Lights,has a 2 position industrial selector ABB switch to turn each light section to ON OFF .
- The Buzzer Red Yellow Green Blue LED Tower Lights is connected to a control box with a 9 inch pole and right angle mounting bracket.
- The 6 ft., equipped with a 2 Pin USA AC power plug,adopting the input range from 85VAC-264VAC.
Installation and use method:
- Secure with two bolts, insert the power adapter into the 85V-264V socket and you are Ready & running.
Where to use:
- Industrial, Automotive, Business Products & Services, Information Technology, Agribusiness, Real Estate, Consumer Products & Services, Retail & Distribution, Transportation & Logistics
- Workshop, Workstation, Warehouse, Office, LAB, School.
- This is a very efficient visual communication tool, Helps Improve Productivity and saves You time and Money!
Package Included:
- 60 mm/2.36 in diameter and 8.5 in Length Red Yellow Green Blue Buzzer Andon Lights
- 9 Inch aluminium pole
- L shape bracket
- 4 hole control box & ABB selector switch
- 2 Pin USA Power Adapter
- Turn the LED unit to unlock then raise upwards slowly
- Unplug ribbon connector, remove module.
- Plug ribbon connector.(slots of female plug towards outside)
- Turn the body or LED unit to locked.
Function set-up
- DIP switch is in lamp body, unlock and remove the bottom LED module, then you can see the DIP switch.
- Adjust DIP switch to set-up function you need.
- Default DIP switch Settings: Buzzer/Red Flashing, Yellow Steady, Green Steady.
- Buzzer Settings: No Buzzer/With Buzzer, Low/Normal sound, Intermittent sound/Continuous
MEAN WELL AC-DC Reliable Green Industrial Adaptor
- Featueres
- FCC/UL/RoHS/CB/EAC Global certificates
- Universal AC input/Full Range
- 2 pole USA pulg, Calss Ⅱ power unit
- No load power consumption<0.075W
- Energy efficiency Level VI
- Protections: Short Circuit/Overload/Over voltage
- Fully enclosed plastic case
- Pass LPS
18W wall-mounted style single-output green adaptor series.equipped with a 2-Pin standard USA AC power plug,adopting the input range from 85VAC-264VAC.With the extremely low no-load power consumption below 0.075w,compliant with USA EISA 2007/DoE and Canada NRCan.The supreme feature allows the adaptor to save the energy when it is either under the operating mode or the standby mode. The utilise utilizes the 94V-0 flame retardant case, providing the double insulation that effectively prevents electrical shock. Certified for the international safety regulations.
Adrian C.
Reviewed in the United States on September 19, 2024
I've been using the ANDONT 4 Stack Super Bright LED Andon Tower Lights with Buzzer for six months now, and I must say I'm thoroughly impressed with its performance. The super bright LED lights are highly visible, even in bright daylight conditions, making it easy to monitor the status of equipment from a distance. The option to switch between Off, On, or Flash mode is extremely useful, and the built-in buzzer provides an additional alerting mechanism.The 16-foot extension cord and 6-foot industrial adapter have been very convenient. They allow me to easily position the tower lights exactly where they are needed. The plug-and-play feature made the setup process a breeze, and I was up and running in no time.Overall, I highly recommend the ANDONT 4 Stack Super Bright LED Andon Tower Lights with Buzzer for anyone looking for a reliable and versatile visual signaling solution for industrial or commercial applications.
KittyCatSeniors
Reviewed in the United States on July 1, 2024
These tower lights and buzzer are incredibly versatile and useful in a variety of settings. Commonly seen in manufacturing environments, these status lights signal operators when attention is required, making them indispensable for maintaining efficient production processes.The stack is not limited to industrial use; it can be adapted for almost anything. It operates on a standard 24v DC lighting control system. Each light can be triggered independently or in combination using a Type-C relay. The horn can also be isolated, allowing for fully automated control of all lights and the horn.I use these lights for a video surveillance system with four alarm outputs in my setup. Each light corresponds to one monitored area, so the respective zone lights up if there's activity. Multiple zones can light up simultaneously if needed.If you need to modify or extend the cable, be prepared to do some soldering. There's no terminal strip inside the light housing, so use a 5 or 6-conductor cable, depending on your needs. For connections under 10 amps, I recommend using 16ga wire. A six-conductor cable is ideal for the common connection, four lights and one horn.The unit's switch box is weather-resistant, making it suitable for various environments. Additionally, it can be repurposed for other uses if you decide to employ a different switching system for the stack. This makes this tower light a flexible and valuable addition to any setup requiring clear and reliable status signaling.
Jason J
Reviewed in the United States on May 9, 2024
This tower light is pretty solid quality and well made. The colors and vibrant and LED light is very bright. Making its very visible. Installation is very simple with easy light operation switch.
Robert T.
Reviewed in the United States on May 27, 2024
Great price and works really well
Isabelle
Reviewed in the United States on October 6, 2024
Good traffic light. Durable. Easy to function good lights and easy to use , the lights are bright
Travis Howland
Reviewed in the United States on April 3, 2024
By default this has the red set to flash and have an alarm / buzzer, which in my case, was undesirable, but thankfully I was able to easily open the bottom light and access the dip switch and simply turn off the buzzer and the flashing, so now each color is simply solid on or off depending on the toggle switch. This makes it really easy to use and not audibly interruptive, which was the point. I used this to mount on the door outside my office so if I was on an important phone call, I could flip the switch to red, or if I was out I'd flip it to blue, in and available to green, or in and busy is yellow. super simple and super easy to use, so long as I remember to flip the correct switch, and actually turn in off when not needed any more.
Customer Review
Reviewed in the United States on April 27, 2024
in daylight, the red light buzzer sound is loud enough and it plugs into an AC outlet. Our old tower only had three lights and the buzzer wasn’t loud enough. This tower’s buzzer is pretty loud. It only requires two bolts to install and it is light enough that two bolts hold it to the wall with no issues. It has an all-plastic housing except for the mounting pole and bolts (which are aluminum). Any combination of lights can be used. You plug it into an 85VAC to 264VAC socket range which covers all worldwide voltage requirements. You can easily turn off the dip switch to prevent the flashing red light and its associated buzzer by removing the blue light housing and accessing the control/circuit board at the bottom of the tower. The lights are LED and I don't see how you could replace the lights so not sure what the life expectancy would be for this tower. I suggest reading the online webpage description. I am happy with this tower as it far exceeds our old three-stack tower.
A Discerning I.V.
Reviewed in the United States on April 10, 2024
The media could not be loaded.
Recommended Products