Your cart is empty.
Your cart is empty.Product Description
Reb
Reviewed in Canada on February 5, 2025
I made 2x folding tables with these!!! They are super sturdy- I can sit on the tables without worries that they will collapse!!! So impressed!
Lem
Reviewed in the United States on February 21, 2025
Very stiff hard to open hard to lock in place seem heavy duty but do not open and close smoothly will pinch a finger when I attempt to open keeps getting stuck
Rosalie
Reviewed in the United States on January 26, 2025
The folding brackets are easy to attach; they're excellent for fold-able legs. The drawback is the amount of screws. Four brackets require fifty-two screws. I purchased four sets twice. The first contained 41 screws and the second only had 40. I completed my projects because I had extra screws in my workshop.
Christina Klimczak
Reviewed in the United States on September 13, 2024
I built my daughter a custom wooden bounce back and I used the for the legs so its foldable and storable. These have worked well and held up well. I keep the bounce back in the front yard and these have been rained on and, in the elements, the seem to be holding up well and no rust.
Trout chaser
Reviewed in the United States on May 30, 2024
I made a folding bed in my cargo conversion trailer. I made an 9” wall base that is fixed so the 8” mattress will sit in an upright position. The folding hinged section is a great feature when using these bracket. I used three brackets for the legs equally spaced for the 80” bed. I can’t be any more pleased on their functional and sturdy use. I recommend these if you’re planning on needing flip up/down legs.
AudioCarpenter
Reviewed in Canada on November 10, 2024
Sturdy, well made, I’ve built a table with folding legs and I am very happy with the hinges and how the lock works - the operation is very smooth and quiet.The positioning of more than enough mounting holes is well thought out and installation was easy.Comes with mounting screws (not sure how many but looks like at least 20) that look like 1”. Philips wood screws with mushroom heads.
Malcolm Pritchett
Reviewed in the United Kingdom on October 26, 2024
Strong purpose designed and effective
Richard W Dyer
Reviewed in the United States on April 27, 2024
I thought I recall reading these will hold 500# so imagine my surprise when I installed one of them on a small 17" table and it wouldn't hold it up. So I installed another and still it sagged a little. Then I noticed the first one had bent a little during my testing phase so I replaced that one with a new one (good thing 4 come in a package). But both of them together still did not satisfy my objective to add extra counter space with a 15" x 17" table top in my RV so I added a single leg using a wooden paint pole with a twisting connection and as a mount I used a drywall sander. I removed the 2 bolts, replaced them with screws and added a rubber leg cap to the bottom. Now I have a very sturdy table that folds against the wall when not in use. I unscrew the leg and put it in the closet.
Andy P.
Reviewed in the United States on March 23, 2023
I bought these because I was making a soccer rebounder for my boys and needed to have something that locks in the open 90* position. They are super sturdy, thick and have very little wobble when open. The screws however are a joke. They are listed as .70” and I was using true 3/4” plywood and they were longer than that. I immediately threw them out and bought new steel screws and set about 6 screws in each hinge. The unit is super strong. Overall worthwhile for the price and would buy again.
djh53
Reviewed in Australia on February 16, 2023
. . . the screws are a worry. We bought 16 hinges in two lots of eight. Each hinge has nine holes for screws; neither lot had enough screws for all the holes. The screws in the second lot were slightly longer than those in the first, which for this job meant I was up for a 30-pack of shorter screws from my local hardware store. Not a big deal, but you'd hope for better consistency. The hinges themselves are fine, and the manufacturer's video is helpful. I found a can of spray lubricant handy; as the video points out, the hinges are tight.
Redwood Vienna
Reviewed in the United States on October 24, 2023
I wanted to repurpose an old desk top into a craft table and liked the idea of being able to fold it up. These leg hinges worked as advertised, but I am not an expert at folding table engineering. I want to share my experience with others who are not experts. It didn't take me long to realize that the legs needed to be stablized, so I used some scrap wood to stabilize the legs. I did it in a way that two legs will fold at the same time. The table needed more stability and after some pondering and trial and error, I came up with a crosswise stabilizer that is removable. The removable crosswise stablizer was the key to a successful project. If I ever do another folding table project, I will work in the need to stablize the table from the beginning. BTW, the hinges were a little stiff but a quick squirt of WD40 took care of that.
GreggP
Reviewed in the United States on October 21, 2023
You have to have realistic expectations for this style of leg mounting - no matter what brand you buy. These arent' for a workbench or the dining room table at Buckingham Palace. When you attach a table leg to a 2-3" square attachment point like this, it's impossible for it to be super tough.That said, I bought two different brands/styles of these type of brackets so i could compare them IRL. These ones were a heavier gauge steel, and were just a tighter fit and finish, and the locking latch mechanism was easier to use (although as others stated, it doesn't lock them up when folded especially tightly - only locks them when extended).And the screws aren't that great, but worked fine for me even into hardwood if predrilled. Or just use better screws.
Paula
Reviewed in Germany on April 5, 2023
Alles sieht gut aus
Recommended Products