Your cart is empty.
Your cart is empty.Product Description
No more holding the lid or door up with your arm or head.
The small and compact bracket is designed to support lids of various sizes and provide an effective soft closure.
Top-Opening
All-round load-bearing
The weight capacity will depend on the size of the lid. Here are a few examples.
- 8 in. lid - 21.5 Pound Max (ea)
- 12 in. lid - 14.3 Pound Max (ea)
- 16 in. lid - 10.8 Pound Max (ea)
- 20 in. lid - 8.6 Pound Max (ea)
- 24 in. lid - 7.2 Pound Max (ea)
- The lid stay is used for top-opening chests, such as toy chest or window seat with storage.
- It holds your heavy chest lid open, and the lid will lower gently, and protect your fingers from being smashed.
- The space –saving bracket will not get in the way.
Upward Opening for Flap Lid
When you lift up flap lid, you have no worry about having to prop it open.
After installing the lid stay, it is easy to lift up by yourself.
widely use
Toy Box
Safety is the biggest concern for kids. Easy to open and close. Due to strong connection between two arms, the safety hinge is hard to fold. Soft closing will work perfectly when preventing it from slamming shut and protecting kid safety. It slows the descent enough so as to not crush little fingers.
Kitchen
The lid stay can be hinged on the upward opening flap cabinet. If you are getting tired of having to hold the cabinet doors up and only having one hand free to reach in, it will meet your needs.
Window Seat with Storage
It is designed for holding the lid up. You can lift the lid by yourself and hold it up while storing shoes, linens, hardware or other daily products.
ABOUT MORINBO
As the well integrated researcher,manufacturer, marketer of hardware tools, Morinbo specializes in inexpensive but functional professional hardware.We seek to provide kind of lid stays in different bearing capacity. The lid stays are designed to provide effective support and slow descent for lid of the chest, toy box, window seat and more.
Safer hinges, easier life
IRONMAN1755
Reviewed in the United States on March 8, 2025
I used 2 of these dampers on a heavy oak, toy box lid. They were easy to install and work great. Now, I don't have to worry about the toy box lid slamming down on my grandkids fingers!
PWilks
Reviewed in the United States on January 9, 2025
The hinge comes with a nice card to aid with installation; however, the product page has a great video that makes it even easier. The hinge seems to work great so far! As long as it holds up over time, I think this is a great product.
Russ Wing
Reviewed in the United Kingdom on January 28, 2025
Second order and second manufacturer error in build.Only redeeming quality is returns process was simple. Won’t be ordering for the 3rd time though.
Jennifer S
Reviewed in the United States on December 4, 2024
The mechanism itself is quality but the installation instructions are completely useless.
Emil Tr
Reviewed in the United States on November 6, 2024
The installation takes a bit of time to figure out at first, but once you get the hang of it, adding more is easy, and they really help prevent little hands from getting pinched when the cover closes. I used these hinges on cabinet doors for a built-in kitchen unit that needed to open upward and stay open. Since the doors are glass, the soft-close feature was really important, and these worked perfectly. It did take a little trial and error to get the installation right and adjust the soft-close tension, but once it was set, everything worked great. The arm moves smoothly, letting the lid open all the way to 105 degrees and stay in place. My daughter loves that she can get to all her toys without the lid slamming down. The Lid Stay is made from strong metal, so it handles heavy lids without any issues, and the powder-coated finish helps prevent rust and chips over time. I ended up making a small jig out of 1/4" plywood to help figure out where to mount the bracket since the instructions weren't very clear on that part.
Tom & Suzanne
Reviewed in the United States on November 26, 2024
The media could not be loaded.
JGrosch
Reviewed in the United States on October 20, 2024
Works great but quite difficult to install. Instructions were less than helpful.
Customer
Reviewed in the United Kingdom on October 17, 2024
Works exactly as advertised.Easy to install,Quite strong inhave 2 but could have done with just one.
Huy Le
Reviewed in the United States on January 31, 2024
I connected the Lid Stay to her new play box after I had finished putting it together by following the straightforward installation instructions. The hardware that is supplied in the package is used to simply screw it into the rear edge of the lid and the opening of the box. The support arm may be retracted and extended in a fluid manner, which enables the lid to become completely open to 105 degrees while remaining in place. The fact that she can get to all of her toys without the lid falling down abruptly is something that my daughter really enjoys. The strong metal design of the Lid Stay is able to handle the weight of even the most substantial and hefty lids. Its powder-coated surface is also resistant to chipping and rusting over time, like other finishes. The functionality of the gentle shut is considered to be one of my favorite aspects. Whenever my daughter is finished playing, she just presses the lid shut in a gentle manner, and the Lid Stay progressively retracts until the lid shuts in a manner that is both quiet and comfortable. The lids will no longer slam loudly! Additionally, the regulated and smooth closure is significantly safer for the fingers of young children.
NJHW
Reviewed in the United States on September 29, 2023
I'm a cabinet builder and was using different kinds of struts and lids supports on toy boxes window seats etc. for about the same price, this one is the easiest to install, I installed only one on a 15" x 48" Birch plywood lid and it shuts really slow, my only complaint is I wish I could adjust the closing speed but then I will complain that the price is too high if they make one, so I'm satified with it the way it is , my advice is if you watch the instructional video they screw the plate on top of the template with all the screws all the way in and then they remove them , I drilled a small pilot hole instead on all the holes, since the more times you put a screw to wood and remove them, eventually they will fall off.Hopefully these will last, I will check back if I get a call back from my customers that they broke and not working .
Customer
Reviewed in the United Kingdom on September 18, 2021
As other people have said, the instructions make no sense whatsoever. Quicker to just use common sense and move it around different positions until it works. I installed one as the weight of the lid dictated; it holds open but still slams shut so will install the second and hope that resolves it.
Mr Clive Bates
Reviewed in the United Kingdom on December 2, 2021
I bought a pair these for the lid of a toy box. They were easy to install and were perfect for the job. Highly recommended.
christopher messom
Reviewed in the United Kingdom on October 21, 2021
The media could not be loaded.
Recommended Products