Your cart is empty.
Your cart is empty.Product Description
Ledytech
Ledytech Ceiling fan light retrofit kit
This led ceiling fan light retrofit kit we designed is Lead-free, Mercury-free, No flicker and No UV .and the light temperature is comfortable, We also use it as a reading light .
How to set the color temperature
Step 1
Turn on the light and select the color temperature by wall switch or pull chain switch ( quickly turn on and off the switch in 6.5 seconds ) .
Step 2
After you get the color you need , please keep the light on at least 6.5 second.
Step 3
After 6.5 second , please turn off the light and keep the light off at least 6.5 second , the light will remember the color you selected .
Step 4
Turn on the light again , you will get the color you used before.
3CCT - 3 Color Temperature Changeable
-
3 Color Temperature Changeable .
6000k color temperature
This color temperature light is very bright and clear, suitable for various environments and occasions, and can provide clearer visibility.
-
3 Color Temperature Changeable .
3000K color temperature
This color temperature of light can create a warm atmosphere, suitable for bedrooms and rest areas, and good for relax.
-
3 Color Temperature Changeable .
4500K color temperature
This color temperature of light is neither too warm nor too cold , suitable for various environments and occasions, especially performing well in work or study environments that require focused attention
How to install this LED ceiling fan light retrofit Source
Step 1
Cut off the power supply.
Step 2
Remove the damaged light source and BALLAST. and then magnet our new ceiling fan light retrofit kit to the ceiling fan.
Step3
Connect wires,positive to positive and negative to negative. and then put the plastic cover back.
Step 4
Turn on the light .
LField
Reviewed in the United States on February 7, 2025
I wasn’t sure I was getting the correct light for my fixture, but it works perfectly. The different settings were a bonus!
Dan Richardson
Reviewed in the United States on February 14, 2025
I ordered 2. 1 came with the connector but the other didn't. Knowing how to do electrical work allowed me to splice both lights in. Both lights work great. They dim with the remote and they matched the old mount holes. Didn't need the magnets.
Terri Chapman
Reviewed in the United States on January 4, 2025
When we thought we needed to just replace a light "bulb", we found a 3 disc LED panel. Was told by Home Depot and a local lighting company that the entire light fixture would need replaced, LED disc couldn't be replaced. I was quite upset. My son found these replacement discs on Amazon, took apart and replaced all 3. Not only does it work perfectly, I now have 3 ligting modes and my vanity is much brighter. Works great.
EP
Reviewed in the United States on January 27, 2025
The media could not be loaded.
Senor Dave
Reviewed in Canada on January 19, 2025
Better than the oem LED light in the Merwry 52" fan. WAY brighter, offers 3 colours (very cool white, medium white & warm yellowish-white), fully dimmable & remembers both the last colour and the last brightness it was on, after being turned off then on again.Can't say a single negative thing about this light. Very happy with my purchase.
Carlos R.
Reviewed in Mexico on January 15, 2025
Muy buen repuesto para mi abanico de techo , excelente luz
Katrina
Reviewed in the United States on September 23, 2024
Functional, lights work and werent difficult to install, per se. But there’s almost no instruction on how to install. The “instructions” are very small print and absolute bare minimum. It took a few trial and error attempts and brain storming to figure it out but it wasn’t difficult. We did however run into an issue with one because the original metal plate in that fan had a non-magnetic coating so we had to improvise how to get the new light to stay put (only one screw anchor aligned). And we almost returned one thinking it didn’t work, but it was just on the dimmest setting. We reset the remote and works great, very bright and fully functional.
T-LEAF
Reviewed in the United States on September 16, 2024
With nearly EVERYTHING manufactured to fail within 5 years and no parts made after one year, it is truly FANTASTIC to find a part that actually works. Even though I had to desolder the connecting wires and solder the connector from the defective ceiling fan lamp to get this to fit properly, it does work just like new. The light is a bit whiter than the original. We do find this very pleasing. Of course, time will tell if this lasts a reasonable amount of time. When ordering a replacement light kit make sure to get a dimmable one if that’s what was originally installed. This kit fits perfectly to replace the original of the 52” Petersford ceiling fan from HD. The original kit was the Minka-Aire 6F844LK01 which is no longer made of course. Just remember the wires with this kit are WAY TOO LONG and using wire nuts or lever nuts takes too much space to mount the kit to the fan. This replacement comes with a connector piece, screws, and adapters, none of which I used as that made installation impossible.
S.F.
Reviewed in Canada on March 17, 2024
We have two ceiling Fans which have been discontinued and both stared to go off at the same time with flickering lights. So I bought one and tried it out, worse comes worst I am out 30$ but replacing a ceiling fan is easily 300$. This led panel fits well (previous was about 4' and one row of LEDs) and I followed the advice of someone who posted a review here as well and did not cover the led panel with a provided plastic cover to allow for proper cooling. Works well and I am glad I don't have to replace the whole ceiling fan just for a broken led panel. Placed another order to fix the second ceiling fan. Time will tell if they last.
William A. Richards
Reviewed in the United States on February 13, 2024
My LED light went out on my Minka Aire - Concept II and finding an OEM replacement was more than frustrating and impossible. I even called Minka and all they did is give me a part number. I ordered this LED light because the measurements looked similar and the reviews were very good. I cut the existing connector from the old light after removing it from the old housing and just used 2 twist connectors and attached it to the new light. The 3 holes on the new light were perfect and it attached right on to the old housing using the old plastic screws and nuts. It worked perfectly with no issues. The programming features are really easy to figure out by following the instructions. If you turn the light off and on quickly it will cycle through the 3 color temperatures. I have 2 of these ceiling fans so I am definitely ordering a backup.
Steve Barkes
Reviewed in the United States on December 1, 2024
My Harbor Breeze ceiling fan light died after 3 years. Purchased this replacement from Amazon, and completed the installation in about 10 minutes.I was able to use the original screws from my fan, so didn't need the magnetic ones provided, but they looked to be a really clever feature. The included wire clip made connecting the wires super easy.The light works great with my remote, dimming is fully functional, and as a bonus, I picked up multiple color temperatures. I like the fact I can use the bluer light for tasks that require more lighting, or the warmer light for everyday use. So far so good, and I would highly recommend this product.
Jorge VD
Reviewed in Mexico on April 17, 2024
Buen reemplazo para el ventilador Federigo: Remover el domo de plástico de la lámpara calentando con secadora y una herramienta para quitar molduras plásticas. Se utilizan los tornillos de origen de la lámpara vieja, los orificios y tamaños son idénticos. Soldar el cable viejo en el nuevo kit. La iluminación y características son las esperadas.
Sandy Phillips
Reviewed in Canada on July 27, 2023
This worked perfectly. I finally have a fix to my kitchen fan/ light. Easy to install.It was worth the wait because the transit time was long. Well worth it.
Recommended Products