Your cart is empty.
Your cart is empty.3-IN-ONE 100% PTFE Lubricant extends the life for all types of tools and equipment. It is specially designed for heavy loads and for use in high temperatures. Reduces friction and wear Protects and extends tool life Works in temperatures between -50°F to 500°F Excellent for heavy loads Marksman Spout for easy precision application Works on axels, chains, hinges, and more 50-state VOC compliant
DS
Reviewed in the United States on February 12, 2025
It's good for lubricating bike chains
JLE
Reviewed in the United States on June 2, 2024
This can be used on the linear rails (not lead screws -- those should use grease) to ensure the printer continues to function without issue.This lubricant will withstand the temperatures of the printers chamber on enclosed printers.Excess lubricant is easily cleaned up without leaving the mess of traditional lithium grease/spray.
Customer
Reviewed in Canada on February 13, 2024
I used this on my small CNC and it worked great so far. Easy to apply, but would be nice if the tip was longer. The oil did not get gummed up and I re-apply as needed. So far so good.
MAB
Reviewed in the United States on December 29, 2024
Good lubricant. It has that fancy additive. i would love to get this in the old can.
Dan M
Reviewed in Canada on December 25, 2024
Mainly using this one for 3D printing and maintenance around the house, sometimes you'll get the classic open during transport on those but with the responsiveness of Amazon returns and guarantees it is no big deal.
Ty B
Reviewed in the United States on October 21, 2024
I have and run 6 FDM 3d printers and I use this on all of them. I found that the white thicker lithium style grease also holds the dirt in and is a pain to clean up to re-grease. The PTFE grease keeps it well lubricated and is easy to clean and reapply. The best place for this grease is on linear rails if your printer has them. NOTE ON BAMBU LAB P1 or X1 printers, do NOT use it on the carbon fiber rods the printhead ride on. Only clean those with alcohol and don't apply anything. Printhead is meant to glide without additional lubrication.
Amanda Goodwin
Reviewed in Canada on July 8, 2023
Item arrived but the lid was not fully screwed on allowing it to leak some of the oil. Fortunately it wasn't too much but there could be better quality control
Vin
Reviewed in Canada on December 16, 2023
Convenient container and works good.
Shinku
Reviewed in Canada on February 4, 2022
This is 3-in-One's fault for not seal wrapping the cap but at least the bottle didn't leak. but like all of the bottles you buy from them the bottle itself has a thin coating of the oil it's just the usual film that capillaried out of the cap. Good on them for vacuum sealing it in a bag at least.
Niko Artley
Reviewed in the United States on December 16, 2022
Bought it for my Leatherman Wave+, which upon arrival was somewhat underlubricated (when you opened the thing, it made gentle scraping sounds. I didn't like that). Couple drops of this cleared that right up! Also works on hinge pins, but you have to dismantle the hinge to get it in there. This is not really a problem for the most part, but it is good to know.
Mark Welker
Reviewed in the United States on November 11, 2022
Originally bought this to assist with problems I was having on my lowe end mSLA 3d printers and cured resin sticking too strongly with the FEP material. Taking some advice from online communities a couple of drops of this on the resin tank helped me find the balance between too much adhesion however I've been finding it also better than some of the traditional oil lubricants on mechanical projects.I've been getting a lot of 608zz ball bearings in bulk packages but finding the packing oil leaving some of them jammed up. A bit of a wash in 99% IPA and a few drops of the PTFE lubricant after the alcohol vaporated left me with some much-imprved bearings. For makers and tinkerers, this is a great compliment to WD-40 and standard 3-in-1 oils
RONIN
Reviewed in the United States on January 29, 2021
I use this for my resin printers fep and the back spindle. It works perfectly. The only reason I gave 4 stars instead of 5 is because the product arrived and the screwtop had not been properly sealed, leaking all over the plastic sleeve and inside of the box, leaving only about a half bottle of fluid left. Otherwise a great product, so Ill continue to purchase.
Captin
Reviewed in the United States on May 27, 2020
I use this in/on areas that would tend to get dirty or are hard to reach with lithium grease. It worked amazingly well on dry sounding or squeaky door hinges and sprinkler heads that wouldn't retract.My only minor issue with it is the twist close cap, sometimes while open and applying it will leak from under the cap. Just make sure you're using a paper towel under the nozzle if you're indoors as it might drip a little. There are no real issues when the lid is closed, that works as it should.
Recommended Products
$90.46
$ 37 .99 $37.99
$24.47
$ 11 .99 $11.99