Shopping Cart

Your cart is empty.

Your cart is empty.

3D Scanning dots,Scanning Markers,Tracking dots for 3D Scanning,High Reflective 3D Scanner dots,Diffuse Reflection Markers Easily Compatible with Einscan Creality Revopoint 3D Scanner (300)

Free shipping on orders over $29.99

$8.99

$ 3 .99 $3.99

In Stock

1.NumberofItems:300


About this item

  • > 3D Scanning dots with Inner diameter 6.0 mm and outer diameter 10.0 mm,Each Sheet include 50pcs Scanning Markers
  • > 3D scanning marker point is an indispensable auxiliary positioning tool and calibration tool in the fields of optical surveying and mapping, machine vision etc,suit for Laser 3D Scanner and White light Scanner.
  • > High Reflective 3D Scanner dots easy to stick on and peel back off
  • > 3D Tracking dots are easy to pick up and very reflective for 3D Scanner
  • > Accurate Tracking Dots Diffuse Reflection Markers for 3D Scanner,widely used for high-precision industrial and consumer 3D scanning, suitable for 3D scanning reverse engineering, quality control inspection Meteorology etc
  • > These 3D Scanning Markers compatible with 3D scanners for example Shining 3D Einstar Handheld 3D Scanner,Creaform,Peel3D,Creality and Revopoint 3D scanner etc



Product Description

markers 3d

About 3D Scanning dots,Scanning Markers Sticker for your 3D scanner.

A 3D scanner marker sticker, also known as a reference marker or target, is a small sticker or object that is placed on the surface of an object to be scanned using a 3D scanner. The marker sticker serves as a reference point for the scanner, allowing it to track the position and orientation of the object as it is being scanned. These good and quality markers will assist in a seamless 3d scanning process and avoid multiple times scanning. These multiple sticker markers on the object at different positions and orientations, a 3D scanner such as Einscan Creality Revopoint 3D Scanner can capture a more accurate and detailed 3D model of the object.

3d scanning marker

300pcs PargaDeco 3D Scanning dots,Scanning Markers for 3D Scanning,High Reflective 3D Scanner dots, Compatible with Einscan Creality Revopoint 3D Scanner

6mm Scanning Markers Sticker for your Scanning Specification:

  • Inner diameter: 6 mm
  • Outer diameter: 10 mm
  • Round, on adhesive foil as tear-off pad
  • 50 single point markers each sheet, total 6 sheet x 50pcs= 300pcs

How to pick out which size fit your for 3D scanning ?

The size of the reference point markers depends on which 3D scanner and measuring volume is used for measuring your objects,Basically to say: the larger the item, the bigger the points have to be applied.

How to put the 3D Scanning Markers Sticker Tracking dots for 3D Scanning?

pargadeco 3d scanning spray

1.In order to ensure the integrity of the spliced ​​data, there should be no less than 3 mark points at the splicing transition;

pargadeco Reflective Markers

2. When labeling points, they should show a V-shaped distribution;

3D Scanning with Markers

3. Try not to align more than two marking points on a straight line, otherwise incorrect splicing will occur;

3d scanner stickers

4. The marking point should be affixed to the surface of the object as much as possible, and the marking point cannot be pressed against the edge of another marking point, or the marking point is folded, which will cause incomplete marking points;

3d scanning markers

5. Select the appropriate mark point size according to the size and characteristics of the object. If the selection is improper, the mark point will not be recognized, resulting in the phenomenon of inability to join together;

3d scan tracking

6. When pasting the marking points on the surface of the measured object, pay attention to avoiding the features of the object, and paste it on the place where the measured object has no features, such as large planes, large curved surfaces, etc

3d scanning reference point marker

7. In general, the number of marked points has no effect on the accuracy and will not increase the recognition rate of the point cloud. Therefore, the pasted marking points should not be too many, just fit the scanning;

reference point markers 3d scanning

What will you get from this 3D Scanning dots package?

1 pack 6 sheet, Total 300 pcs

6.0mm 3D Scanning dots,Scanning Markers Sticker for your 3D scanner


Just Bueno
Reviewed in the United States on February 9, 2025
So I do a lot of 3-D scanning on my spare time in these markers are essential. They’re easy to put on an easy to remove, which are vital to being efficient. Of course, they also work really well in terms of tracking the scanner and all of my scanners whether it’s my high-end or low in scanners, they all work well.
L&S
Reviewed in the United States on September 19, 2024
These are absolutely good dots, they are easy to use. They are properly designed for good functionality. The adhesive holds well.witjoit being permanently adhered. Overall a good option if they suit the need.
James D.
Reviewed in the United States on August 7, 2024
These dots are a bit big for desktop projects perhaps. The adhesive isn't really conducive to reuse. They are very retroreflective and don't tear but yeah, I don't think I'm happy with the large size.
Watts of Reading
Reviewed in the United States on August 20, 2024
I have the Creality scan ferret which I purchased when it first came out. It has been hit or miss how well it works for me. These actually do help the scanner keep tracking much better. They are a little larger than I thought they would be but thats on me for not paying attention to the size when I ordered them. Either way they still worked well with my scanner. There are a lot of dots included and they seem to be somewhat reusable too. Its a good value for the money and so far they are working for me.
WS
Reviewed in the United States on August 19, 2024
Cheap scanners are great but need a lot of augmentation to get good scans "quickly". These dot stickers did help provide stable reference points for my scans.
Carl W. Price
Reviewed in the United States on July 15, 2024
A lot of the cheap scanners don't do great, print some tracking towers and use these dots, and you can get a much better scan more easily. If you have a 3D scanner, tracking dots are well worth the time and effort to use.
cupajoe
Reviewed in the United States on June 19, 2024
I tried these markers with a new Einscan 3d scanner. I have zero experience scanning, but it's been days of fun learning. The scanners were on order, then I see these markers, and selected them.The manual suggests using only its brand-name scanning markers. I wondered why, what are the differences? These PargaDeco brand have a caution label: "Static sensitive device" ? What's up with that? I figured a marker is just a dot with adhesive.In any case, I tested these PargaDeco along side the ones the scanner provided, and they appear in some ways different. Glue is different, so they were easier to remove from the melamine coffee cup, and reuse.Slightly different color and brightness may account for the scan-differences. Also different scanners use different forms of lighting... InfraRed .. laser... Who knows what these things are best suited for. Asking price was $10.99 for 300.They work fine as far as I know. It looks like a "texture" scan is best for tracking markers. The faster non-textured scan didn't see them and just made holes where these dots are.
Tiffany Taylor
Reviewed in the United States on December 23, 2024
Works great
Recommended Products

$22.99

$ 11 .99 $11.99

4.4
Select Option