Your cart is empty.
Your cart is empty.Product Description
-
Motor Direct-Drive Saw Wheel for Efficient 2500FPM Blade Transmission
-
Prevents Accidental Activation, reducing the risk of injury.
-
Keep the wheel clean and extend the service life of the machine.
-
Monitor the operational status and wear condition of the blades.
-
Rip Fence with 120°Miter Gauge
-
Cast aluminum table tilting from 0°to 45°，it can cut wood from multiple angles.
-
Effectively eliminate the dust to maintain a clean working environment.
baldeagle
Reviewed in the United States on February 20, 2025
This thing works great for it's small size. Easy to assemble and cuts very well.
white bull
Reviewed in the United States on January 12, 2025
This is my first band saw. The price is very economical, looks good and works good, only concern is the miter guard is a little lose, and the fence needs to be measured on both ends to work cut a fine line.
Larry Steckman
Reviewed in the United States on August 8, 2024
Came well packaged. Saw intact as a unit, easy setup. All adjustment for degrees very rudimentary scale both on bench table and glide. The miter gauge bar had a slight bow but flat side and wide side. Had to take apart and put in vice and more to make straight. It now slides easily. The fence guide is pretty crude but functional. The saw part and operation are descent quality given the price. Runs good cuts good.
Marcus Jones MD
Reviewed in the United States on December 28, 2024
I have purchased other band saws, but they are not even close to the well-made construction of this one. I have used it a good bit cutting out plaques and it has never bogged down, even in the tougher grain woods. It was zeroed from the start so straight cuts are not a problem either when using the guide.
RedRay
Reviewed in the United States on October 30, 2024
I have had two Craftsman benchtop bandsaws previously. Both came with a factory installed blade which could hardly cut anything thicker than 1/2 inch. Both required blade changes to work at all and both had trouble cutting 3/4 inch stock. In my opinion, both had pathetically weak motors. The Woodskil, even with the factory installed blade, cut through 3/4 inch stock like butter. I was much impressed with its power. Some assembly was required but that was easy, the instructions were clear and concise.
Snot Donkey
Reviewed in the United States on October 20, 2024
The color is great! Bright yellow! The top and bottom yellow doors are metal, not plastic. The table is aluminum and comes with a small miter gauge and even a rip fence. The stock blade is thin and wanders some but you can change it out for a 3/8" blade to stabilize your cuts. Go slow and let the saw work. Good saw for smaller woodworking projects.
shehab saeed
Reviewed in the United Arab Emirates on August 4, 2023
all good
Dcrosby13
Reviewed in the United States on July 21, 2023
The 2 year warranty is irrelevant if there is no support. After about 10 minutes of usage the motor locked up and just gave off a hum sound. I was outside the 30 day return window. Things break and so that’s not the issue. The issue is the support that stands behind the warranty and it is here’s that I learned a valuable lesson: if a company does not have a phone number for support or customer service and only offers e-mail or website communication, then the chances are extremely high that they are not serious about providing quality (or maybe not any) support. It was is a easy to find link for support that provided a form to complete. I filled out this form and submitted it many times over a 45 day period. Amazon customer service went way out of their way to attempt to contact the seller on several occasions… with no response from any of these attempts. Thankfully this was not an expensive unit, but it still hurts to be ignored. Note: I am always impressed that Amazon is happy and willing to do so much to suport the customer, so I need to do my part and do better due diligence on purchases. Going forward I will take an extra step in the purchasing process to research and do the due diligence to make certain their is a way to contact support outside of a website or e-mail only communications.
Nevada Woodchuck
Reviewed in the United States on June 3, 2023
It was easy to assemble and square up the table with the blade. I cut a piece of wood to check everything out and was surprised that it cut at 90 degrees on the first attempt. I make candle holders and like to insert colored pieces of acrylic on the inside. My laser cuts extremely accurately and I was depending on this saw to cut the acrylic to fit, and the pieces had to be exact. Not only did the saw cut cleanly, but there was no problem in straight cuts, no wandering, and no variation in the cut. I did hook up a shop vac and attached a magnetic light, however. Changing the blade was fairly easy and only took me a few minutes. All in all, I would definitely recommend this saw to anyone looking for a small, quiet, and excellent band saw.
Customer
Reviewed in Mexico on April 16, 2023
A ver, es una maquinita para trabajos ligeros, casi para hobby. Pero la uso mucho en el taller. Y por el precio, te la recomiendo. Está limitada en capacidad de corte, no es para piezas demasiado anchas ni gruesas. Pero para detalles es de lo más útil.
Oscar Rodriguez Arce
Reviewed in Mexico on July 12, 2022
La pieza llego en perfectas condiciones de embalaje, me tarde unas semanas en poder empezar a usarla, en general no hay problema con el producto.Satisfecho con mi compra.
SIGIFREDO LOPEZ DIAZ
Reviewed in Mexico on January 5, 2022
Es muy practica y me sustituye muy bien a la caladora. La utilice para recortar madera en forma de corrientes de agua para un diseño de piso de mi estudio
eduardo mtz
Reviewed in Mexico on December 5, 2021
Llego en buen estado de buena calidad y funciona al 100
Recommended Products