Your cart is empty.
Your cart is empty.Product Description
Siding Installation Kits
Siding installation tool can make your next siding project easier and more efficient. This efficient clamping tool supports and measures the installation of cement board siding like a pair of hands, and the design keeps your siding level and adequately spaced as it works its way up the wall without any layout, helping you save up to 75% of your time.
Applicable boards
Siding Tool for 5/16-inch fiber cement siding. Adjusts in 1/4-inch increments for 4- to 8-inch siding reveals. This tool will securely fasten a 12-foot-long piece of fiber cement siding with hands-free nailing.
- Be sure to check when your siding applies before you buy!
- Vinyl siding does not apply
Detail Show
Purchase Instructions
1.The siding tool's hand-gripping area is made of heavy-duty plastic with rubberized padding material on the locking handle to ensure that it won't scratch or mar pre-painted siding. 2.The plywood part is made of high-strength manganese-iron steel, which is difficult to dislodge and at the same time ensures his hardness. 3.The adjustable holes on the sides are all spaced 1/4" apart, so you can adjust the spacing of the boards you want without additional measurements.
- Do not over-tighten the handle; over-tightening the handle may cause the tool to disengage from the siding.
- Make sure to clamp the previous board before adding the next one.
Method of use
This siding installation tools is simple and quick to use when in use. Step 1: Adjust the spacing of the siding installation as needed. Step 2: Slide and clamp the tool onto the first course of siding. Step 3: Place the next course of siding on top of the tool. Step 4: Secure siding with nails and repeat installation steps
Comparison with other products with the same function
Our advantage is that we are simpler to use, in addition, the design of the clamping plate ensures that it is difficult to dislodge during use, and the small holes on the side provide a measuring function to adjust the distance between the plates that you need.
Usage Scenarios
Siding for mobile homes installation kit is suitable for everything siding, you can use it to repair roofs and install siding on indoor and outdoor walls.
TSam
Reviewed in the United States on February 7, 2025
To be honest, I have not used it yet, so I cannot provided good accurate feedback, so I will update another feedback after I used it. However, by looking at the description, looks like it will be helpful when working with siding.
Rocky Wright
Reviewed in the United States on February 25, 2025
Very good
Yvonne Wigley
Reviewed in the United States on February 22, 2025
It did what my husband wanted it to do.
NY
Reviewed in the United States on January 6, 2025
These worked well for what I needed. Easy to use. Durable.
CH
Reviewed in the United States on December 4, 2024
This works well and helps a one man show do the job well and with accuracy.
John
Reviewed in the United States on November 6, 2024
Firstly, these seem to be the same thing as gekco gauges, which are quite a bit more expensive... You can adjust the siding reveal between 4" and 8" in 1/4" increments. I know they're really meant for installing cement board siding but I wanted to see if I could use them to install cedar siding... You can do it, and it does speed things up, but you have to loosen the plate that slides behind the siding and put washers in there so they will go over the thicker material, then, because wood siding is face nailed, you have to only loosely install the nails until you've done the row above... For me, this is fine as I like to line all the nails up with a laser level when I'm done getting the siding installed.
JHoney
Reviewed in the United States on November 18, 2024
I used these to put up a 20 foot wall, and they did a pretty good job. They need one minor modification to fix the levers slipping.To fix them, add an elastic hair tie around the height adjustment screw, and stretch it over the lever once installed so the lever doesn't slip down.Even with this mod, these do require a bit of care to use. It is easy to set the board down too hard, and they will slip a bit. Lots of double checking to properly seat them, and make sure they haven't moved.I drilled all my cement-fiber clap board so being able to set the board in place was super handy. They were also useful for double checking cut-outs since it is pretty easy to fine tune positioning.The plastic construction is a good choice so you don't mar the face of your boards. They seem reasonably well built, but probably aren't up to just being tossed into a tool box. I would treat them gently like levels or squares that you don't want getting torn up.
Mr. Know-it-Some
Reviewed in the United States on October 27, 2024
This instrument facilitated the replacement of some damaged siding. It is user-friendly and adaptable to accommodate various dimensions of siding slats. The cost of this tool is highly competitive. This tool is particularly beneficial for individuals who do not frequently engage in such tasks.
Recommended Products
$61.95
$ 28 .99 $28.99
$30.99
$ 14 .99 $14.99