Your cart is empty.
Your cart is empty.Product Description
Introducing the YOUTHTXY Heater - 2000W 120V Floating Electric Immersion Water Heater. As a well-known manufacturer specializing in high-quality water heaters, we are committed to providing products that exceed your expectations. Durable, reliable, and trouble-free operation, this immersion water heater is perfect for heating water in a variety of applications.
Product Details
Immersion Heater
Product material: 304 stainless steel
Overall Length: 14 inches
Power: 2000W
Power cord length: 79 inches
When it is working, please ensure that the stainless steel sheath below is completely submerged in water, otherwise there may be a risk of fire
Floating Head Design
When the water level reaches a certain height, this immersion water heater can float on the water surface, making the heating more uniform. Even if the water level is not enough, just ensure that the stainless steel sheath position below completely invades the water, and it can still work normally (the metal rod above can be exposed to air)
Rust Proof Stainless Steel Guard
The anti-rust stainless steel guard aims to keep you away from directly contact the heating elements, which adds the max protection to prevent accident injures.
Thicker Copper Cord
Adopt the high quality copper power cord(15AWG) in thicken design to carry more electricity without causing overheating, smoke or fire, adds more security while using.
Partial usage scenarios
Note
Safety is our top priority and we would like to highlight some important considerations. Always ensure that the heater is fully submerged in the liquid during operation to prevent overheating and potential damage. If the bucket heater is exposed to air or runs out of water when powered on, the heating element can become very hot within seconds, causing irreversible damage. To avoid any fire hazard, do not plug two heaters into one outlet.
If you are heating an inflatable swimming pool , please read the content carefully
THE ABOVE TEST RESULTS ARE
AFFECTED BY THE FOLLOWING CONDITIONS.
- The heating time is based on the condition when the initial water temperature is tap water and there is no sun exposure in the room.
- If the initial water temperature is warm, or if there is sun exposure, the heating time will be much less.
- If the water level is over 0.4m, the heating time will be longer, and two heaters are needed at the same time. It is recommended to use the heater under the sun to shorten the heatingtime.
- If the required water temperature is over 104 ° F, the heating time will be longer and two heaters are needed at the same time. It is recommended to use the heater under the sun to shorten the heating time.
Once again, emphasize:DON'T PLUG TWO HEATERS IN THE SAME OUTLET!
Don't touch the water while the heater is working.
Unplug the heater and take it out before entering the water!
John Nesmith
Reviewed in the United States on January 22, 2025
Using this heater daily for about 3 weeks now proves it worked, for a full bathtub of cold water during winter, as instructed submersing the heating element below water line, but not the electrical head assembly, keeping it dry. A single heater unit took about 2.25 to 2.5 hours to heat 30-35 gallons at a usable very hot bathing temperature before getting scalding hot. Using two heaters at once cuts time, plugged into two different electrical outlets to not overload a single 15 amp electrical circuit breaker switch, it takes about 1.5 to 1.75 hours for same amount of water. Be careful, little too easy to accidental fall over as a free standing setup in water, takes a little time to secure a stable standing setup in water less than 7 inches deep and or a large body of water to heat over several hours to avoid accidental bumping or fall overs, is reason for 4 stars not 5.
Rebecca anderson
Reviewed in the United States on September 9, 2024
wish it had a thermostat gets to hot way past 90 degrees it says
Jim Wilson
Reviewed in the United States on July 4, 2024
Raise temp by 10 degrees in 60 minutes for 270 gallon pool.
Danny Rumney
Reviewed in the United States on May 31, 2024
I wish the top of the unit was made in a bright color like yellow or green for greater visibility when in the tank.
Smithreaux
Reviewed in the United States on December 9, 2024
If you are using this in your inflatable hot tub, it will not last with the chemicals. DO NOT USE! It also shorted out and had we been in the tub at the time we would have been electrocuted.
Customer
Reviewed in the United States on November 26, 2024
This worked well for a couple of months but the heating element eventually burned out. Definitely not something that would be reliable over time.
Will
Reviewed in the United States on October 25, 2024
This worked great for a couple months. Then it just stopped working and I can hear water in the top of it, the part that has the electronics.
Darin Kaplan
Reviewed in the United States on October 19, 2024
Got this for a small 9ft round 4 ft deep inflatable pool. This thing worked like a charm, fast, easy to use and heated the pool up in no time!!!! This is perfect lil tool for those wanting an easy quick way to heat up certain things.
Recommended Products
$61.99
$ 24 .99 $24.99