Shopping Cart

Your cart is empty.

Your cart is empty.

2 Pieces Silent Clock Movement Mechanism Long and Short Shaft with 6 Different Pairs of Hands DIY Clock Repair Parts Motor Replacemen

Free shipping on orders over $29.99

$7.59

$ 3 .99 $3.99

In Stock

1.Color:Black


About this item

  • Clock Movement Mechanism - Ultra silent Scanning Design, two different shaft length quartz movement for your choice. Sweep clock movemen without any noise which can offer your sleep a silent environment.
  • Two Clock Mechanism Size -Short total shaft length 16 mm (0.63 in), thread length 8mm (0.315 in), suit for 3 - 6 mmthickness clock panel. Long Total sharft length 23 mm (0.9 in),thread length 15.4 mm (0.6 in),suitable for 9 - 13 mm thickness clock panel.
  • DIY Wall Clock Repair Parts Kits: Including 2 x different size clock movement,5 Pairs Hour Minute hands,3 xSecond hand and 2second caps, easy for installation,Multiple choices in one set.
  • Clock Hands Size:The size indicated in the picture shall prevail, they were made of aluminum, please do not install them with too much pressure or they will be bent, please check the sizes before buying.
  • Wide Application - DIY quartz wall clock replacement movement parts, suitable for repairing, replacing or making a clock,most can be applied to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc.



4.3 out of 5 stars Best Sellers Rank
  • #10,632 in Tools & Home Improvement (See Top 100 in Tools & Home Improvement)
  • #7 in Clock Movements
Batteries required No


Clock movement mechanism battery operated DIY repair parts replacement with 2 pairs of short hands

Clock repair kit:
Simple design, easy to use, suitable for repairing, replacing or making a clock.

Specifications:
Material: plastic, brass and aluminum
Colors: black

Good craftsmanship:
Good handwork material to make a clock by yourself.

Specifications:
5 x Minute hands
5 x Hour hands
3 x Second hands
Material: plastic and aluminum
Power: 1.5 V AA 1 x battery (not included)
Package includes:
2 x Quartz clock movements
5 x Minute hands
5 x Hour hands
3 x Second hands
2 x Second cap nuts
2 x Rubber gaskets
2 x Brass washers
2 x Brass hex nuts
2 x Metal hooks
Notes:
The hour and minute hands have a protective plastic coating that needs to be carefully removed.
Be careful not to bend the hands with too much pressure.
Please do not use alkaline battery, rechargeable battery, or they will damage the movement.
Do not tighten the brass hex nut too tight.
Press hard to get all clock hands in place.
Check if all hands are aligned.

Great replacement parts:
If you don't want to throw away the broken clock that has accompanied you for a long time, this clock replacement kit is helpful to repair the clock at home, helping you to remain the memories that this antique clock gave you.


GPS
Reviewed in the United States on March 5, 2025
This kit was perfect for updating my vintage clock that had a very loud ticking movement that was very annoying to hear. This kit includes two silent movements and multiple pairs of hands providing options for repairing old clocks or making new ones. Buyers should measure their old movement shafts and hands to make sure this kit will work in their old clock. It runs on one AA battery which are easy to find and the movement is truly “silent”. The price was a great value also considering everything included.
Mark A. Ray
Reviewed in the United States on February 7, 2025
Our very large wall clock stopped working recently, and I was able to easily fix it with this repair kit. I chose this product in part because it included mechanisms with two shaft lengths, since I was 100% sure how long a shaft I needed. I also appreciated having several styles of hands to choose from, including sweep second hands, which we didn't have before.My only criticism: the package comes with zero instructions. However, if you click through the images on the product listing, you'll find a set of basic instructions, along with a graphic that shows what size shift you need. I would also recommend paying attention as you remove an old mechanism so you know how the new one should go together.
Nope
Reviewed in the United States on February 4, 2025
Very quiet, good construction. I haven't had it long enough to know anything about battery life, but I suspect it won't be good. A normal battery-operated quartz clock pulses short electromagnetic burts a couple of times a second to advance its mechanisms, where this one is actually constantly spinning a motor. It does what's advertised though, with a completely smooth second hand.
tonya hilterbrandt
Reviewed in the United States on February 3, 2025
Pro: the hands are prettyCons: A. the material is little more than foil B. my cat brushing against the clock bent one of them C. the area at the base of the hands isn’t covered, it’s just a thin nutPro: very easy to clip with scissorsCon: A. some second hands are excessively long, which is why I had to clip the one I used B. they get tangled easily with just the slightest bendPros: A. quiet B. keeps timeCon: no instructions included, I had to use trial-and-error at every step
James D.
Reviewed in the United States on February 19, 2025
This would have been 5 stars if there were any instructions at all. Watch how your clock goes together as you disassemble it, and look at the customer videos, particularly the first one from Ycoyx9tx. It's not hard, but the picture that people refer to does not mention the order of the washers and rings. I put the black washer on the mechanism then pushed the shaft through the hole, so the black washer stayed on the back of the clock face. Then on the front, I put the round gold washer, then the hexagonal one (tighten the hexagonal one gently but snugly). Then I pushed the hour hand on, then the minute hand. Lastly I screwed the little cap screw into the shaft.
hazel314
Reviewed in the United States on February 19, 2025
I have a cheap desk clock that the spouse loves. The battery corroded in so I had to replace the motor. Failed at buying just a clock motor that would fit old hands, so pulled the trigger on this set. The hands are long and made for a wall clock. I simply cut down the hands to give something that would work. I give myself a sold B for my cuts! This is a non ticking clock with no noise.
Kasey K.
Reviewed in the United States on February 14, 2025
I have a really cool wall clock that has real neon around it that works but the little quartz clock mechanism in it no longer worked. this was a perfect fit to the other clock and i chose to swap out the original clock hands with some from this kit to better fit the vibe of the clock. i'm not the most handy person on the planet but i found this pretty easy and quick to do.
Philbgreen
Reviewed in the United Kingdom on December 27, 2024
Really good value quartz clock motors, great price for 2 plus a choice of fingers, these motors were a perfect fit for the original fingers so we're not needed this time. Some people love the ticking sound but I wanted silence & these make no sound at all. Just beware there are 2 spindle lengths & with thin clock faces the protusion may be too great, I suggest thick packing washers at the rear as a way around this problem.So far as time keeping goes after 1 week they have not needed adjusting.
Z id
Reviewed in the United States on October 25, 2024
This stuff does not work. I bet the positive reviews just didn't bother when they stopped working, perhaps outside return window.Even though Amazon was great about replacing and refunding my money, the time I wasted and ultimately did not get a working version, is ridiculous. I was very careful to make sure it was installed properly and hands don't collide. I used fresh non-alkaline batteries as required in ad (good luck finding those - they are required for poorly designed mechanisms - look it up).Original order: One stopped after several hours. Touch clock and it starts again. Reliably fails. Other seemed ok.Amazon send replacement.Replacement order: One is seized - setting wheel won't even turn. Other one stops after hours like original order.So, 3 out of 4 mechanisms didn't work. THEN the only working one stops working. Touch clock and it starts again.So, 4 out of 4 mechanisms don't work - one actually lasting close to two weeks.I won't be ordering any more replacements - it looks like these are all made by the same place and sold by different resellers.I'm going to have to buy new clocks since repair does not appear to be an option. One clock I am trying to fix lasted 35 years! Now China makes these as cheaply as possible and has gone too far.Very disappointing. Likely poorly made components just seize up eventually and need a nudge to get going again. Save your money and time. Amazon should be flagging these. It was "Amazon's Choice"!
Kunde
Reviewed in Germany on June 1, 2021
die Uhr läuft zufriedenstellend und ziemlich genau.Zeiger sind sehr dünn und vebiegen sich bei der Montage sehr schnell.als Montagehilfe eignet sich ein Kugelschreiber sehr gut.Miene entfernen und dann erst testen ob der Durchmesser ausreicht.Wenn Ja, mit dem kleinen runden Loch die Zeiger vorsichtig hineindrücken.
Goldencaz
Reviewed in the United Kingdom on February 18, 2021
I needed a silent movement in my very noisy clock! This fits the purpose and it really updates the look of my clock with the red hands. I'm very pleased with the options of hands I received, a lot of choice and so fast delivery. I only ordered last night and it was here today before 2pm! The new movement was simple to fit and makes my clock look more retro!
Monica b.
Reviewed in Italy on November 21, 2020
Sostituito meccanismo a un orologio, vecchio, ma per me bello, con l altro meccanismo, (la confezione è doppia) , ne costruiro' uno anch'io......
G.P.
Reviewed in Italy on November 20, 2020
il movimento è silenzioso, serve aggiungere delle rondelle per aumentare la stabilità del fissaggio.
Recommended Products