Your cart is empty.
Your cart is empty. Specification:
Shank diameter: 1/4 inch
Blade diameter: 1/2 inch
Blade length: 10mm, 20mm, 25mm, 38mm
Material: alloy steel
Weight: 4.6 ounces
Note:
Designed for the hand-held and table-mounted router, it can not be used in electric drill & drill machines.
The flush trim router bit must be fully inserted and tightened.
Package Included:
4 x Flush Trim Router Bit
Richard
Reviewed in Canada on September 3, 2021
Poor quality steel. Did not stand up to more than 2 uses.
George
Reviewed in the United States on March 12, 2021
So far I’ve used two of the four bits. I found that Thor collet that holds the bearing in place had a loose Allen screw and the collet became loose causing the bearing to fall during usage. I checked all four bits and I found that they all needed their collet Allen screws tightened. It’s not a issue with the quality of the the product and more operator double checking their equipment prior to operating the tool. Just a heads up. Good tool, cut wood and particle board very well.
Manfred Poehlmann
Reviewed in Canada on January 18, 2021
Good quality set of pattern router bits. Work great with good quality bearings.
JZ
Reviewed in Canada on September 19, 2020
Good quality
Joseph
Reviewed in the United States on August 10, 2020
These aren’t the best, but for the money, they will get you through plenty of projects. I was able to build 2 tables and 8 guitar bodies before on of the bearings blew up. A good little pack of tool if you’re just starting out in routing and don’t want to spend a ton of money.
Daniel E Rosenbaum
Reviewed in the United States on May 18, 2020
Worked great for my project. Needed to trim an oval shape in 1 1/4” Douglas fir. Used 1/4” template on top. Bits worked very well. Smooth cut. Needed to make a few passes on some of the thicker areas.
SBKMike
Reviewed in the United States on February 19, 2020
I needed a flush trim bit with the bearing on the bottom for a project. All of the ones I have the bearing on the other end. It worked quite well for me going through 3/4 inch plywood. I have only used one of the set so far, but I'm sure I will get use of the rest at one time or another. They come in their own plastic containers, so they don't get nicked up. For the price, this is a good deal.
George P
Reviewed in the United States on February 14, 2020
The price and the quality for the hobby level use I needed.Not sure these would hold up to commercial production of cabinetry and moldings, but for the purpose I needed them for they worked great!
Raymond
Reviewed in Canada on December 31, 2020
bon achat
Robert C.
Reviewed in the United States on December 12, 2020
If you trim different thicknesses of material you may find different length of bits useful. This set has 1/4 inch shanks and fit nicely into a palm router. The bits have carbide cutting edges and slice cleanly through veneers and laminates without burning or tear out. They are also inexpensive if you need to replace one.
Allleycat2112
Reviewed in Canada on December 11, 2020
As soon as the bit hit the wood it blew up and cut my arm. In 28 years of woodworking I have never had that happen. Maybe it was just a faulty bit but I will not trust this product anymore.
Chinchilla Wafers
Reviewed in the United States on January 30, 2020
Really nice to have the set of different depths, you need to start off with the short ones to do deep cuts while following a template. I do wish they were a smaller diameter, because you have to vaporize quite a bit of wood to cut something out.
Rob
Reviewed in the United States on December 4, 2019
these will work well for small projects, but I wouldn't trust them for anything high end or expensive. one of the screws holding the bearing in place came off in the middle of routing causing the bit to wobble and took a huge chunk out of the guitar I was working on. I've only used these with a palm router, so your mileage may vary if you have a full size router.
Recommended Products
