Your cart is empty.
Your cart is empty. About Bonsicoky
Bonsicoky is a brand that pursues high quality.
We provide high-quality and reliable hardware products to global customers.
Our product quality and innovation will continue to improve.
I believe you will follow in the footsteps of Bonsicoky in the future.
Feature
1.Made of 304 stainless steel, strong rust resistance, high strength and durability.
2.Manufactured by precision technology, can tighten the wire rope without loosening.
3.The polished Single Bolt Wire Rope Clip has no burrs, which can reduce the wear and blockage of the wire rope.
4.Suitable for industrial use, manufacturing, home renovation project, aquaculture and marine applications.
Specification
Material: 304 Stainless Steel
Surface Treatment: Polishing
Size: M2 (2mm)
Applicable Rope Diameter: 2mm
Thread Diameter: 4mm/0.16"
Package Content
10Pcs x M2 Double Bolt Wire Rope Clips
Gary
Reviewed in the United States on March 5, 2025
They work great and look good on the antennas I build
IslandGuy
Reviewed in the United States on July 14, 2024
These stainless wire clips are really, really handy fot constructing wire antennas for my ham radio hobby. And they are at a great price point too. In the past, I used brass wire nuts at the hardware store but these are better. I bought the double clips, as I always used two brass ones in the past. I bought the M4 size, and they will work on heavier gauge wire. I'm thinking I should get some M2 size clips for 18 gauge wire or smaller but not completely sure about sizes. What I am sure about are how handy abd cost effective these stainless wire rope clips are. They are a must have for any radio amateur who constructs their iwn wire antennas!
George Cullen
Reviewed in the United States on October 22, 2024
I expected a bit smaller. I believe i was thinking about Size M-4, not M-5. But- that’s my fault, not theirs. These are GREAT wire clamps. I use them for outdoor 130’ Ham Radio antennas. They need to stand up to extremes of weather, exposure to sun, wind, and life. They do.
Gerald
Reviewed in the United States on September 15, 2023
Looked to be a perfect fit for my need for locking down the ends of a small cable, but in a relatively confined space, I found it very fussy to get the pieces set and the cable sides in and together, then screwed down enough to retain it long enough to reset the fingers, tension the cable, and finish up. Then, after tightening it down, it slipped, and it took 2 or 3 iterations to get it to retain tension (messing about pulling and jiggling with my hands), and I'm really not sure its golden, and the assembly is going to be behind a covering with 16 machine bolts to undo if it slips, so I'm not sure its going to stay as it is.
Michael L. Rowan
Reviewed in the United States on February 8, 2023
When building this wire trellis, we cross-wrapped the wire ends using these clips to create a loop to connect to our turnbuckles. They were a perfect size for this project. The screws are of course small, and I was concerned that I'd have trouble screwing them together with my hands, but they were easy to connect. I used a small socket to tighten them together. On the centers of the trellis, pictures, I held the center of the clip over the wires with a pliers and those were also easy to install. The clips help make this project a success. They were strong and seem like they should last a long time. As a general contractor, I would recommend them, and would order them again.
Tommom
Reviewed in the United States on October 31, 2023
I used these to attach 100' of 1/8" cable to my submersible well pump. Worked perfect! And I have plenty left over for other future projects. The best part is this kit was about 25% of the cost compared to the local box store and all I had to do was walk to my mailbox!
Eitenne the Reader
Reviewed in the United States on April 28, 2023
Well made small hardware that I used as a clamp-on spacer to shorten a stretched cable.The come in sizes, so you need to figure out which size meets your need. They make a slick loop as shown.They are also available in a two-machine screw version that looks like a figure-8. I didn't have enough room to try those, but as they offer both redundancy and higher clamping forces, they could be useful.Note to the seller - if an assortment of the different sizes and including the double-screw version came available, I would be interested in having that assortment on-hand in my project/repair supplies.
Buckeye Barbara
Reviewed in the United States on May 16, 2022
Somewhat tricky to get cable properly installed under clamp. Once the cable is located properly & nuts are tightened, no fear of slippage. Forceps are good tool to have & 7 mm hut driver.
Recommended Products
