Your cart is empty.
Your cart is empty.Product Description
Compatibility:
- Anet A8
- Anet A6
- Creality CR-10
- Tevo Tarantula
- MK8 makerbot
- prusa i3
- Ender 3
- Ender 2
- Ender 5
- And so on
Sleek Output:
Output port is perfectly round, minimizes the deviation of the printed model.
Uniform Tip:
Made with centering CNC precision automatic lathe, make sure the input and output holes are concentric, to get a uniform tip.
Smooth Inner-Wall:
One-time forming technology, make sure the interior of nozzle is smooth without burrs.
Smooth Input:
Cutting with the diamond knife, make the contact surface more flat, so it can prevent printhead from leakage effectively and avoid nozzles clogging.
Package Included:
- 25 x Brass 0.4mm nozzle
- 5 x Stainless steel needle
- 1 x Plastic container for needle
- 1 x Metal Storage Box
Shawn
Reviewed in Canada on January 18, 2025
Thanks
Laura
Reviewed in the United States on July 24, 2024
tips all look good quality, came with afew cleaning needles and a case for everything to stay in and not get lost or poke yourself. cheap too
Scott Gresko
Reviewed in the United States on June 16, 2024
I love how inexpensive these are and they perform very well. Any issues at all like build up on the nozzle exterior or any doubts about a clog; just unscrew, discard, and thread on another.
Russell Jones
Reviewed in the United States on June 15, 2024
The media could not be loaded.
Richard Carver
Reviewed in the United States on March 22, 2024
Seem like a nice set. I purge them with some hot filament but didn't see any contamination. Nice storage can and pokers. Will be my go-to brand and the price is right.
Kenneth LaRue
Reviewed in the United States on December 17, 2024
Good price. Fast shipping. Very satisfied.
Jelly Bean
Reviewed in Canada on October 27, 2024
Works great
Stephen
Reviewed in the United States on January 9, 2024
I am no stranger to printing i use it for work, home fixes, gifts etc good nozzles are a plethora on Amazon one thing I noticed that occurred only with this nozzle brand is the filament gets stuck in the cooling block seemed like a normal clog wont go in wont go out but weirdly enough after removing the nozzle let it drop right out.One would assume oh just a clogged nozzle yet the nozzle wasn't clogged could it have been moisture and melting expansion? Sure but why haven't other nozzle brands done this to my printer idrk but just something to keep in mind.To avoid this I've found if im constantly printing its fine leave the filament in the hotend for a few days and guaranteed it'll be clogging in half an hour so now if I dont have projects lined up I have to pull it back out of the block with this nozzle doesnt make much sense since my printers and filament moisture controlled cabinets but thats what I got. The cleaning rods are standard nozzle count is a lot which is nice
Kevin
Reviewed in Canada on January 27, 2024
Decided to give these a try - come in a nice case so you don't lose your needles and/ or nozzles - work great so far on my base Neptune 3 printer!
Scott
Reviewed in the United States on January 24, 2024
Pretty much the exact review I left for another size nozzle I reviewed 0.6mm. But these are 0.4mm and a larger quantity.They seem good quality and the actual nozzle itself is symmetrical. I have a video microscope at work and checked out all of these. They are all consistent which is a good thing. I have not tried these yet but if you can look close as I did with the microscope you will see that they have some left over residue on the insides. However you decide to use these I would recommend cleaning them first. Cold pull or as I am going to do is I have some left over brake cleaner and canned air from another project. Ill spray them first and then blow out with air. After I recheck them if there is still any leftovers material I will perform a cold pull. Check the manufacture or forum for your particular printer to see how this is done. Its pretty basic though. Heat up the nozzle with PLA filament to about 215°C, push some through then turn off or adjust the nozzle temp to where it will solidify and "stick" to the left over material and pull it back out of the nozzle. You might have to do this a couple of times but do it until it is clear. You can also do this between filament color changes to help remove and clean the nozzle for the next batch. Also these nozzles are not meant to last forever and depending on your usage should be replace occasionally, me I print daily so on average about every three months. Overall I like the shapes of these and with some initial cleaning I expect these to work. Ill update my review later if I have issues.
Chris porter
Reviewed in Canada on September 6, 2022
The case, the print nozzles are fabulous. Infact for the money it's worth it. I print lithophanes and they work awesome
Dan Fisher
Reviewed in Canada on October 18, 2022
Great supplies to have on hand when printing
Adam
Reviewed in the United States on November 18, 2021
I absolutely love these nozzles. I recently had a friend recommend some high dollar hardened steel nozzles. 2 x 0.4 nozzles for $30. And I absolutely hated them. They clogged constantly and the print quality was unpredictable at best. I threw them away and went back to these brass nozzles. These nozzles do wear down quickly with any kind of abrasive filament. But that's to be expected with any brass nozzle. However, the print quality is good enough and they're cheap enough that you can throw them away after a few weeks of use. That's the best thing about these. They're inexpensive and out of probably 50 nozzles I have used I only had one that had a defect that affected printing. If you want a cheap brass nozzle that prints great and you won't feel bad about throwing away if it starts to wear, get these. I always have at least a dozen of these on hand. As a matter of fact, the friend that recommended the expensive nozzles I spoke of earlier ran out and needed a nozzle. I gave him a couple of these and now he won't use anything else.
Recommended Products
$119.99
$ 52 .99 $52.99