Your cart is empty.
Your cart is empty.The 3/4 in. 600XL Pressure Reducing Valve handles sandy, debris-laden water systems for high-flow capacity in residential, commercial, and new construction applications. It meets compliance with universal plumbing code. The stainless steel strainer includes a standard 20 mesh configuration and separate-access cover for simplified cleaning, while the bronze threaded bell provides superior corrosion-resistance and speeds access to the internals – together, cutting labor time up to 50%. Internal components of the 600XL utilize a balanced design, providing accurate downstream pressure without consideration of the incoming pressure.
JEFFERY K HUNTER
Reviewed in the United States on January 28, 2025
Had to disassemble to get it installed in its location but had it all done in 2 hrs with no custom work required. Wife had water back on in less than 24hrs from diaphragm blowout to hot shower. Hero!
Derrick
Reviewed in the United States on January 14, 2025
Work wells for its use
Northridge Mark
Reviewed in the United States on August 2, 2024
After 30+ years at my house, I finally found out why the pipes near my swimming pool made a 'hammer' when the sprinklers were turned off -- somehow, the pressure to the sprinklers had the same pressure as the pipes coming from the street - about 120 psi. The sprinkler didn't need that much pressure.I bought this pressure valve to reduce the pressure to my sprinklers and the pipes that go to my swimming pool.A professional (okay, a handyman who knew what he was doing) installed this and reduced the pressure to 50 psi -- this is plenty for my sprinklers and eliminated the pesky water hammer that we struggled with for many years.This device appears to be well made. I expect it to last for decades. If you need one, I have no reservations recommending this one.
zeus
Reviewed in the United States on March 24, 2024
The PRV feels solid and well made unlike the Watts with a plastic top installed by my plumber.I like the fact that you can overhaul the internals which increases extends its life and reduces waste. It also has a slot for pressure gauge if you like.The instructions were straightforward and was able to combine PRV installation with whole house water filter. I installed this myself with Propress components.So far no leaks or humming that plagued the Watts.Would highly recommend.
Joe Zoetemelk
Reviewed in the United States on October 21, 2024
I own a local plumbing company and I will buy this product on amazon vs a plumbing supply shop
Doug 5259
Reviewed in the United States on July 16, 2022
Review for 1-1/4" valve: Zurn 112-600XL Lead-Free FNPT Union Pressure Reducing Valve.Reduces pressure as designed - and as expected. After installation it was easy to adjust output pressure.This product has been installed now for 6 months, and still doing it's job (as expected, and hopefully for much longer). The previous pressure reducer failed, likely due to contaminants stuck in the mechanism that wouldn't flush out. A valve rebuild kit costs almost as much as a new item, and then there's no guarantee that it will work. Since this new pressure reducer was replacing an identical one, the installation was fairly straight forward. Even though I applied Teflon tape to the threads, it was a challenge to get the thread joints tight enough to not leak. This (I presume) was due to the pipe diameter (1-1/4"), so my pipe wrenches required some extra leverage (in the form of some spare pipes over the handles for more length) - that's not the fault of the product, just physics, and my muscles.
Brendan H.
Reviewed in the United States on May 2, 2021
Product came loosely packaged in the original manufacturer’s box. All gaskets and additional documentation was included. Unit was a great replacement and came preset at about 58psi. Line tested. I had a plumber install it as a replacement to the one that came w the house bc the great freeze of 2021 in Texas- NE TX to be exact(at 0730 we had -7deg F air temp w -13 wind chill) cracked the original and blew an additional pipe in the attic. Fully lead free and almost completely made of heavy cast brass. Thanks to Amazon for getting it to me faster than the plumber could get it through his supply chain, and less expensive too! 2 weeks without water sucked but this brought my water pressure down from 96psi at the main. Thanks again to Amazon and Zurn for this great pressure regulator.
DaveS
Reviewed in Canada on September 30, 2018
Worked as advertised. No noise. No leaks. Easy to adjust the pressure (I increased in about 5 PSI above the factory set pressure). Has been installed 3 months and no issues. Totally eliminated the water hammer in the house by adjusting to 50 PSI. (Irrigation system still needed a water hammer arrester ). Solved my problems!
rdagger
Reviewed in the United States on August 29, 2018
I bought the 600XL to replace a 600. The reducer was located in a very tight spot and the pipes are going into cement. Fortunately, the 600XL is exactly the same length as the 600 so I was able to drop it in without having to do any demolition. The input side has a 1” female union thread and the union assembly is included. This allowed me to remove and install without cutting any copper. I was able to use the union collar from the old reducer so no soldering was required. The new collar gasket also fit. The output side has standard female 1” NPT thread. My city has very high water pressure at over 170 PSI. The reducer worked well. The default PSI was around 60 PSI. Only time will tell if this non-lead version will work as well as the original.
Recommended Products
