Your cart is empty.
Your cart is empty.Jason
Reviewed in Canada on June 22, 2018
Overall my tinted tail lights look good...few air bubbles here and there...I found the material to be a little thick and hard to apply. I had to remove lights from my car and I used a heat gun to stretch the material over the corners/edge there was no other way to do it.Take your time.. take tail lights out and be careful to not waste any material because the roll was just barely enough to do the tail lights on my 98 civic. If I were to do this again I’d buy 2 rolls so if doesn’t look good you have the meterial to redo..nothing worse than running out of meterial half way through tinting
AllSeeingI'mDantheman
Reviewed in the United States on April 13, 2018
This product is very dark I recommend you to stretch as much as possible. And also on my vehicle headlight it was not easy as a first timer it was pretty difficult that's why I have a lot a bubble bubbles because I got tired of it it was is too hard without heat gun. After a week, I decided to take them off " too dark with 8000" and lightfixture has melted ( my car's daytime running light? Or high beam(had yo turn them on feels too dark. Can'tsee so)? Whatever the only reason that I can think of...But anyways, I can see my 8000 lighting shine and living it without them.
Richard H. Martin
Reviewed in the United States on August 23, 2017
I used it on the face of a too-bright LED clock If that’s similar to how you plan to use it, don’t let the many negative reviews you see here scare you off. The pigeon-English instructions that are stuck on the roll are terribly inadequate, and other instructions you can find on the web are not a lot more helpful. Try these instead:Be aware, as another reviewer has pointed out, that there is a clear layer on the outer surface of this stuff that needs to be removed (I did so before I applied it). Another trick: use scotch tape to stick to the clear plastic on both sides of the vinyl to initiate the process of pulling them off easily; “prying” them off with fingernails sucks.Despite what some reviewers imply I found this stuff quite forgiving, at least at room temperature. If you aren’t happy at first, you can immediately pull it back up from the surface you stuck it to (to eliminate a large trapped air bubble, for example) without leaving any residue of adhesive, and then stick it back down. The vinyl is just stiff enough to keep it from buckling or developing folds if your hand can’t keep it perfectly straight as you apply it to the curved dimension of your surface from one edge to the other. The vinyl (after the protective clear cover layer has been removed at least) trims very easily and cleanly with a sharp knife.There is a tendency for small bubbles to remain trapped under the vinyl. Using my fingers, or a flat plastic squeegee, I could persuade them to move a bit, but rarely far enough to reach the edge and disappear. Firm pressure shrinks them a bit, but never eliminates them completely. Don't be dismayed, however. They weren't noticeable from a few feet away, so I decided to live with them. A few days later the bubbles seemed to be a little smaller, and a few weeks later when I took a close look, by golly they had completely disappeared! The very thin vinyl must be slightly porous, eventually allowing trapped air molecules to exit.
Jay O.
Reviewed in the United States on May 11, 2015
The film was very dark. Which is what i wanted. I chose this because i didn't feel like dealing with the smoke tint spray and getting messy.It does match perfect with my black car but it has bubbles. It feels as if it can come off easy, i don't wanna try to peel anything off. Hopefully in a week or 2 the bubbles are gone. The light is still visible even in daytime which is awesome.3 out of 5 stars. i'll put what I'm giving this item a star for.1st star - Blacked out look with good light visibility2nd star - Fast shipment and delivery3rd star - Inexpensive pricemissing stars for4th star - Installation5th star - QualityEveryone is different tho. Some ppl love the look of a light smoke, others like me, want that dark blacked out look. Like i mentioned above, the film seems like it is easy to peel off and it still has bubbles after 2 days of installation. I messed up the 1st time so i re ordered another set and had a professional do it. Overall it is a good item. I will purchase again unless i find something better.
balln2k9
Reviewed in the United States on February 9, 2014
I have purchased so many different brands of tail light/headlight tint, only to be upset with the bubbles, creases, or ripping. This is by far the best film. If this is your first time trying to add tint to your headlights or tail lights, please purchase more than you need, like double or triple. Trust me, because if you have a challenging car (Infiniti) with crazy curves, it's very hard to get it right the first time. I did install on my ride and came out great. Ended up taking off after install, just too dark. The item description says "50% dark smoke" so I was think 50 VLT like window film, but far from correct.Pros: great price, very thick film with protection cover (helps not scratch film when installing), forgiving, and will blackout whatever your tinting.Cons: a little too dark (asking for trouble), shipping price is stupid.Items needed: breakaway razor knife, rapidtac or soapy spray bottle, heat gun (blow dryer also works) and of course this film.Once you get good at this, it's a cool hobby and your friends and family will think you if you do it yo their ride. I guess you can try and make some side cash if your good.
Maiki
Reviewed in the United States on July 2, 2013
I've read some reviews on this where a lot of people say negative stuff about it lacking adhesive. The truth is that you must have patience in order for it to work. There is film protection on both the adhesive side and the non-adhesive side. This was my first time tinting headlights and I had an awesome experience. All worked fine, used a hair dryer and smoothed out bubbles on the tint on my 07 GT Mustang headlights. The only thing that sucked was my cutting, but the tint did what it was supposed to do and now I will be ordering more from Moyishi to tint my tail lights, fog lamps, and parking lights. I was supposed to return this item for a refund but I decided to try it out and am very pleased with the outcome. Great product and would recommend it to anyone with the patience to use it correctly. Awesome product and awesome service by Moyishi. I waited a little over a week to receive it all the way from China, but it was worth it. Ordering again.
Recommended Products
$41.95
$ 17 .99 $17.99
$67.99
$ 26 .99 $26.99
$49.99
$ 21 .99 $21.99