Your cart is empty.
Your cart is empty.Product Description
One-Hand desoldering iron (with integrated desoldering pump)
YIHUA integrates a soldering iron with a desoldering pump for you to desolder joints continuously without jam! You can operate this iron single-handedly and desolder through-hole components and excess solder (solder bridge) from SMD boards with ease.
Single-Handed Operation
With this portable desoldering iron (Built-in soldering iron and desoldering pump), you can enjoy efficient and continuous single-handed desoldering
No Jam
YIHUA exclusive heating system and solder extraction design ensure continuous desoldering without jam. This product contains electrical insulator protective material (mica), it is normal for the product to emit white fumes for no longer than 20 minutes on first use. This is a normal and intended occurrence for this product, please rest assure for safe usage.
Remove excess solder
Tired of wasting solder wick on a large blob of solder? The 929D-V can remove excess solder on through-hole and SMD solder pads efficiently.
Removable Storage Chamber
This desoldering iron comes with a removable chamber. You can lift and remove the tube to clean the scrap solder out easily.
Desoldering Nozzles
The desoldering nozzle is interchangeable and we included 2 nozzles in the package. CAUTION: change nozzle only when the iron is cooled completely.
Heat Deflector
This deflector can reduce the uncomfortable heat from transferring to your hand when using the iron continuously.
Heating Indicator
When the iron is connected to an electrical outlet (110V-127V ONLY), the heating indicator will turn ON to indicating the desoldering iron is heating up.
Sufficient Pre-heat
Allow the desoldering iron to preheat for approximately 3 minutes before desoldering to get a smoother desoldering experience.
Resolder to Desolder
Old PCBs may have a layer of dusts covering the solder joints, add fresh solder to the joint when desoldering to speed up the desoldering process.
Keep it quick
Don’t stay at the joint for too long to prevent damaging the solder pad, once the solder is completely melted, press the trigger to extract and take the iron away from the joint.
QP
Reviewed in the United States on February 7, 2025
Works perfectly! Bought it to repair my DualSense (PS5) Controller that had bad stick drift. Thought it wouldn’t work since I’m a noob at it and burned the board a little, but it’s perfect - and this made it pricelessly easier. Heats up and cools down pretty quickly, handle and plastic were able to withstand more than an hour of continuous use. Good size and well-designed. Comfortable and quick to use.
Jerald
Reviewed in the United States on February 16, 2025
This was a time saver of a device!I am pretty good with soldering electronics "larger" i guess, like RC cars, and real car electronics, fixing vacuums etc. I have never really replaced any chips on a board or what not, but I was challenged with replacing the thumb stick sensors for my SCUF Reflex FPS Controller.I quickly learned that my soldering station was not the best suit for this and found this perfect device! - it heats the solder up to a working point and then you plunge it away to remove the old components.Then, when you are installing the new ones, you use your regular iron to get it started, and this cleans it all up!It does take a few tries to get the hang of it and actually wait for a proper warm up. and I would advise to let it run and warm up for like 20mins, as there is some burn off from the factory. (they do advise you several times about this smoke burn off with tags, etc.)I am now confident that I can repair even more electronics now that I have this tool!
Sean G.
Reviewed in the United States on September 14, 2024
As others have mentioned, this iron does emit fumes for a little while when you heat it up for the first time, and they are not that pleasant. If you have a fume vacuum for solder fumes, it might be wise to places this iron near that vacuum for about 20 minutes while plugged in to allow the coating to burn off and be absorbed.Besides this, I have had a lot of success removing solder from several joints so far. I was able to replace a couple key switches on my keyboard with the help of this sucker. A video review from another customer shows them using it for this same purpose and it is really quick! I also recently replaced some bad relays on the control board for a burner on our stove. Because those relays are handling 240V at high currents, they have larger than average joints with silver solder on them. This iron was able to melt through the solder like butter and get them almost entirely clean! A little finessing was necessary to get the legs of the relays completely loose because of all the solder, but it was much better than trying to remove all that solder with a wick and regular iron.I probed the end of the sucker with a thermocouple and found it runs about 740 degrees Fahrenheit.The only thing I wish it had was a power switch either on the device or inline on the cord so it was not sitting on when you don't need it. Other than this, it has been awesome and I have no complaints!
Sam Fisher
Reviewed in the United States on June 17, 2024
This YiHua desoldering iron is a pretty solid tool. It's super easy to use and heats up quickly, melting solder in a flash. The metal tip is a big improvement over those teflon ones that always seem to burn or melt. Plus, it's easy to clean and doesn't clog up easily. For it's current price point, it's a good middle-ground option between those cheap solder suckers and the pricier desoldering guns.Now, here's the thing: it works way better than those manual solder suckers, but it doesn't have the super-powerful suction I was hoping for. For components with two leads, it usually gets the solder out in one go. But sometimes it takes a few tries, even with through-hole contacts.With bigger components, like transistors or capacitors, you'll probably need to do several cycles of melting and sucking to get all the solder out. Holding it on the joint for longer helps melt the solder thoroughly, but be careful not to overheat the component.I didn't have any issues with the tip fitting over different sized leads, from tiny resistors to larger transistors and capacitors. It works best on two-lead components because the leads can move freely as the solder melts. With three-lead components, it's a bit trickier.Overall, this tool is definitely a step up from a basic solder sucker, but don't expect the same vaccum as one one a complete rework station. If you're looking for a decent, affordable desoldering tool, this one gets the job done, just be prepared to put in a bit of extra work on those stubborn joints.---Product: YiHua 929D-V Electric Desoldering Soldering Iron Solder Sucker Desoldering Pump with Shorter Charging Handle and Desoldering Nozzles 1.0mm 1.2mm for Through-Hole DesolderingASIN:
Mike T
Reviewed in the United States on November 21, 2024
First, I like and trust this brand: I've had a soldering station from them for over a year and it's great, holding up well, use it a lot.This solder sucker works quite well. Much better than the older style with the rubber bulb. I added an inline power switch to the cord and mounted a soldering iron stand to my bench. So, this tool is always handy and ready to go. I use it more often than I expected. I still use a regular solder sucker and/or wick for some stuff, especially if regular soldering iron is already hot. This one does take a couple minutes to heat up, but it has plenty of heat (and thermal mass), so it works fine, even on heavy duty switch terminals for example.
Recommended Products