Your cart is empty.
Your cart is empty.Product Description
Vertical Wall Mounted Olympic Barbell Holder/ Barbell Storage Rack
Dimension
17. 52 x 4. 25 x 3 inch wall mounted barbell holder top: specially designed with a screw hole-to-hole spacing 2, 12 & 2 inches
Hum plastic pad included
Fully equipped with a thick padded plastic layer to reduce noise and protect your precious barbells from damage
Quick and easy installation
Four screws to help you securely attach the bar hanger on wood in a breeze
Heavy capacity load
Load up to 200 pounds, can store both long & short bars, including Olympic weightlifting bars, power bars, curl bars, cambered bars, and more
-
Barbell Holder 1 Bar
Features a PE cushion to sufficiently reduce noise and provide better protection to your barbells
-
Barbell Holder 2 Bar
Ensuring they will not get scratched every time you put them on the rack
-
Barbell Holder 1Pair
Fit most barbellss: Olympic/standard weight bar, short/Aluminum training bars and even axle bars
Vertical Wall Mounted Olympic Barbell Holder
Cliente casi satisfecho del todo
Reviewed in Spain on February 15, 2025
aconsejable totalmente muy sólido se aconseja no usar los tacos que incorpora y en su lugar poner unos fisher.
Competition bag
Reviewed in the United States on September 19, 2024
The Yes4All Vertical Wall Mounted Olympic Barbell Holder has been a fantastic addition to my home gym. It keeps my space organized and my barbells safely stored.What I Liked:Space-Saving Design: The vertical wall-mounted design is great for maximizing space in my gym. It helps keep the area tidy and frees up valuable floor space, especially in smaller setups.Sturdy and Durable: The holder is built to last. It securely holds my Olympic barbells without any wobbling or concern about stability. The construction is solid, and it feels very reliable.Easy to Install: Installation was simple and straightforward. The included hardware made it easy to mount, and it didn’t take much time to set up.Great for Multiple Barbells: I use it to store multiple barbells, and it holds them perfectly. It’s an excellent solution if you have different bars for various workouts.Overall Impressions:The Yes4All Vertical Barbell Holder is a must-have for anyone looking to keep their home gym organized. It’s sturdy, easy to install, and a great way to store barbells securely and neatly. Highly recommended for any home gym setup!
azmleo
Reviewed in Saudi Arabia on July 26, 2024
If you think you can adjust rubber barbell dumbell no
Mom
Reviewed in the United States on June 10, 2024
Why did I not buy this sooner? This holds 2 Rogue Ohio Bars & 2 Bella Bars perfectly. It has an acrylic inlay so as not to scuff up the bearings area on the barbells. Super easy installation & makes my garage gym look tidy and organized.
action.hero
Reviewed in the United States on June 10, 2024
For vertical storage you can’t beat this price ($32). Other “name” brands (Rogue) are more expensive and charge for shipping. The quality steel is on par with Rogue. The best part is the holes are lined up at 16” for studs and it lined up perfectly for me. I’m not worried about the small lip since the rack is level and out of the way.
Dinesh Anumula
Reviewed in the United States on December 19, 2024
Very sturdy, holds great weight, saves a lot of space. Nice options with fit.
ASAF
Reviewed in the United States on October 9, 2024
Arrived today. Yess it is coated steel which is much stronger tgen Aluminum. Build quality is top notch.The plastic is hold by high quality screws .It seems the plastic is UHMW abd if so then it will last forever.The UHMW will protect your barsI think it gives Rogue a clear fight .It is the same specs as rogue.The manufacturer aimed high with this one.and it seems it has succeededVery good !!
BioShock
Reviewed in Italy on October 5, 2024
In giro si trovano prezzi da paura. Al confronto, questi, con 4 soldi, sono fatti benissimo, qualitativamente sono perfetti. No graffi, vernice che tiene benissimo, fanno il lavoro che devono fare. Un solo consiglio, una cosa che normalmente faccio sempre: usate tasselli adatti al muro su cui li installate, usate sempre tasselli di buona qualità. magari di una misura maggiore di quelli a corredo. Quelli a corredo fanno pena, ma è sempre così, qualsiasi cosa acquistate che necessiti di tasselli, se escono a corredo sono sempre pessimi, modello base a due ali sempre di pessima di qualità. Prodotto consigliatissimo, installati a febbraio 2024 sono rimasti come il primo giorno, non hanno fatto ruggine.
Auroux
Reviewed in France on October 3, 2024
Parfaitement parfait, solide et robuste , c’est pas du toc … je suis ravi 👍🙏🏻
Michael Garcia
Reviewed in the United States on April 22, 2024
Great addition to my home gym! Not only is it functional and sturdy but it provides a cool decorative touch to my gym (looks sick against my black walls). Since I ended up putting this holder on a concrete wall, I used Tapcons instead of using the hardware it came with.
Sneakerhead Twin Dad
Reviewed in the United States on July 30, 2023
I was looking for something to organize my barbells on one hanger. I had single hangers which work perfectly fine, but this right here is so much better since everything is one place. It's well built and has all plastic liner protection to keep your barbells from getting scratch up from the hanger. Installation is fairly easy 4 lag bolts into studs and you're done. Honestly, I didn't expect this to be so well built, but I'm so happy with this.
M. D. Williams
Reviewed in the United Kingdom on April 24, 2023
I'm really pleased with these, they are much better quality than I was expecting. Very solid, nice thick metal which will withstand any amount of abuse you are likely to throw at it and the plastic linings are also of high quality and reassuringly thick. I wanted to be able to mount my dumbells on the wall as well, so bought 2 sets and overlapped them at one point and as a result, I think they look pretty good on the wall now.
Pete D
Reviewed in the United States on February 23, 2020
This thing is solid! It is exactly what I wanted and at a great price. It took five minutes to install and comes with extra hardware incase you have an issue. There are no instructions, so I figured I would give some tips.1. The flat side is the outside2. If you have standard bars, make sure you measure the handle section (non-threaded). I set them up at two studs apart (~32" on center) and it was just the right distance for the handles while supporting my olympic bar good as well.3. Place these at a height that is comfortable for you, don't go too high.4. Place the washer in-between the bolt head and the metalI took off one star for not having directions. I won't knock a star for shipping but wanted to share that for some reason UPS felt this small package required a signature. I have no clue why this was the case, but it delayed the shipment one extra day. I signed the slip on my door and it was delivered the next day.
Recommended Products