Your cart is empty.
Your cart is empty.YAKATTACK SWITCHBLADE TRANSDUCER MOUNT DEPLOYMENT ARM With a single product you can attach the SwitchBlade to either your YakAttack CellBlok, deck mount, or on a track system. The blade designed to minimize gurgle and resistance, making the SwitchBlade the most efficient transducer arm on the market. The patented arm folds up compactly. No more cumbersome, rigid arm to deal with. And for the angler that really wants to dial it in to fit their boat perfectly, we made the length of the arms customizable and can easily be cut to length to accommodate nearly any kayak on the market. Unlike other transducer deployment arms of the past the new SwitchBlade Transducer Arm from YakAttack is focused on speed and adjustability. Featuring a hydrodynamic blade design the SwitchBlade causes less water turbulence resulting in a faster and less noisy over-the-side transducer mounting solution. Whether the SwitchBlade Transducer Arm is mounted on top of a YakAttack CellBlok or on the gunwale of your kayak the depth of the transducer is easily adjustable and gives you the ability to get the transducer deep enough for your side scan fish finder. If you don't need the full length of the SwitchBlade simple remove the middle arm and now you have a customized solution. To deploy or retrieve the transducer arm the SwitchBlade features a unique tubular design and multi pivot allowing for easy articulation in and out of the water.
rodolfo senders
Reviewed in the United States on January 30, 2025
Exelente
rodolfo senders
Reviewed in the United States on January 30, 2025
Exelente
Roberto MeLe
Reviewed in Mexico on August 16, 2024
Buen producto
Roberto MeLe
Reviewed in Mexico on August 16, 2024
Buen producto
Gregg H.
Reviewed in the United States on July 15, 2024
Mounted my SI transducer to it for my kayak.
Gregg H.
Reviewed in the United States on July 15, 2024
Mounted my SI transducer to it for my kayak.
G heyden
Reviewed in the United States on January 29, 2024
Haven't been on the water with it yet but my Garmin Striker 4 transducer mounts easily and it looks like it will work out on my kayak perfectly.
G heyden
Reviewed in the United States on January 29, 2024
Haven't been on the water with it yet but my Garmin Striker 4 transducer mounts easily and it looks like it will work out on my kayak perfectly.
Everything Outdoors
Reviewed in the United States on April 20, 2024
Absolutely thrilled with my YakAttack Switchblade Transducer Deployment Arm! It seamlessly integrates with my Garmin Striker 4, providing precise sonar readings every time. Installation was a breeze thanks to the track-mounted design. Highly recommend for any angler looking to elevate their fishing experience!
Everything Outdoors
Reviewed in the United States on April 20, 2024
Absolutely thrilled with my YakAttack Switchblade Transducer Deployment Arm! It seamlessly integrates with my Garmin Striker 4, providing precise sonar readings every time. Installation was a breeze thanks to the track-mounted design. Highly recommend for any angler looking to elevate their fishing experience!
Ayax Nivardo Sobrino Saavedra
Reviewed in Mexico on March 29, 2022
El brazo se dobla frecuentemente. Si lo aprietas mucho no lo puedes manipular, y si lo dejas muy flojo se mueve mucho al momento de meterlo al agua
Ayax Nivardo Sobrino Saavedra
Reviewed in Mexico on March 29, 2022
El brazo se dobla frecuentemente. Si lo aprietas mucho no lo puedes manipular, y si lo dejas muy flojo se mueve mucho al momento de meterlo al agua
RC
Reviewed in the United States on February 18, 2021
Yakattack really takes pride in the design of their products. The switchblade transducer arm fits well, easy to install, customizable, light weight, well built and looks great. Mounts perfect on the yakattack cell block. You also have the option to mount directly onto your kayak or use the track mount option. Good price, great product 👍🏼
RC
Reviewed in the United States on February 18, 2021
Yakattack really takes pride in the design of their products. The switchblade transducer arm fits well, easy to install, customizable, light weight, well built and looks great. Mounts perfect on the yakattack cell block. You also have the option to mount directly onto your kayak or use the track mount option. Good price, great product 👍🏼
Mike H.
Reviewed in the United States on August 19, 2020
I removed one of the armature arms per instructions and it fit my kayak nicely. Folds into the top of the kayak when not in use. Integrates nicely with the YakAttack round base fish finder mount that I already had as the longer track bolt was included. I had to enlarge the hole in my Garmin Striker Plus 4CV transducer mount to fit the bolt provided, but the installation is simple if you are handy and plan it out. Rides nicely in the water with no perceptible increase in drag or yaw. I had tried several in-hull solutions (Garmin in-hull mount, Duct Seal, ZipLoc water bag), but the quality of the signal made for poor display detail/loss of ClearView and all of the in-hull water solutions leaked. Perfect!
Mike H.
Reviewed in the United States on August 19, 2020
I removed one of the armature arms per instructions and it fit my kayak nicely. Folds into the top of the kayak when not in use. Integrates nicely with the YakAttack round base fish finder mount that I already had as the longer track bolt was included. I had to enlarge the hole in my Garmin Striker Plus 4CV transducer mount to fit the bolt provided, but the installation is simple if you are handy and plan it out. Rides nicely in the water with no perceptible increase in drag or yaw. I had tried several in-hull solutions (Garmin in-hull mount, Duct Seal, ZipLoc water bag), but the quality of the signal made for poor display detail/loss of ClearView and all of the in-hull water solutions leaked. Perfect!
Mark
Reviewed in the United States on May 11, 2020
It took a bit of time and planning (plus uninstalling/reinstalling) to make this work for my rig. The issue was the instructions. There were several parts that were not included in the installation instruction so after I had it installed, I when back to the part lists and based on the name of the part, figured out where it was supposed to be used. Meaning I had to disassemble and reassemble to correctly add the missing parts. That was very annoying and made the installing more difficult and twice as long. If they had only included those parts in the installation and there were some parts of the install that just were not documented at all. My advice to the manufacturer, try using your instructions to install the product and you'll find many gaps.Took it out on the water this weekend and it performed flawlessly. It's a real shame that it's a good product but hinder by the bad installation instructions.I would still recommend it but advise very careful planning and test assembly before you start tighten screws.
Mark
Reviewed in the United States on May 11, 2020
It took a bit of time and planning (plus uninstalling/reinstalling) to make this work for my rig. The issue was the instructions. There were several parts that were not included in the installation instruction so after I had it installed, I when back to the part lists and based on the name of the part, figured out where it was supposed to be used. Meaning I had to disassemble and reassemble to correctly add the missing parts. That was very annoying and made the installing more difficult and twice as long. If they had only included those parts in the installation and there were some parts of the install that just were not documented at all. My advice to the manufacturer, try using your instructions to install the product and you'll find many gaps.Took it out on the water this weekend and it performed flawlessly. It's a real shame that it's a good product but hinder by the bad installation instructions.I would still recommend it but advise very careful planning and test assembly before you start tighten screws.
John Barnes
Reviewed in Australia on January 30, 2020
Excellent product, used for attaching my transducer for my fishfinder to my kayak.Service from you was 1st class.
John Barnes
Reviewed in Australia on January 30, 2020
Excellent product, used for attaching my transducer for my fishfinder to my kayak.Service from you was 1st class.
Robi Owens
Reviewed in the United States on April 12, 2019
Most of the products I get from Yakattack are amazing and top notch. The switchblade is so close to being a great product but comes up just short of the mark. Installation was super easy and adjustability was superb. I had to add a longer screw to install my Raymarine Element transducer, but once I got that sorted it was no problem to arrange everything like I wanted. I really like the integrated cable grooves for locking down your transducer cable and the fact that the . I installed on a Predator PDL kayak and I was able to get things just right. The problem is that once you get things just right..... it's hard to keep it there. The joint design doesn't allow the joints to be tightened properly and the whole unit moves around in the water with the big transducer. It worked fine for the first trip out.... but when I was about to land the boat all the adjustment changed when I flipped the transducer up and out of the water. The rail mount was ok... but didn't really secure the switchblade in place like I wanted. I only used the one screw as supplied and it wanted to rotate. Hopefully I can add another rail mount screw to fix this. I plan to keep using it for now, but I'm also going to try to work out some adjustments. I'm leaning towards epoxying all the joints in place once I get the exact mounting figured out. Right now I would consider this a great "starter" transducer mount. Something to buy first that has a ton of adjustability so that you can figure out exactly where you want your transducer and how deep, etc. Then once you know the dimensions you need you can look into buying something else that is sturdier and more permanent.
Robi Owens
Reviewed in the United States on April 12, 2019
Most of the products I get from Yakattack are amazing and top notch. The switchblade is so close to being a great product but comes up just short of the mark. Installation was super easy and adjustability was superb. I had to add a longer screw to install my Raymarine Element transducer, but once I got that sorted it was no problem to arrange everything like I wanted. I really like the integrated cable grooves for locking down your transducer cable and the fact that the . I installed on a Predator PDL kayak and I was able to get things just right. The problem is that once you get things just right..... it's hard to keep it there. The joint design doesn't allow the joints to be tightened properly and the whole unit moves around in the water with the big transducer. It worked fine for the first trip out.... but when I was about to land the boat all the adjustment changed when I flipped the transducer up and out of the water. The rail mount was ok... but didn't really secure the switchblade in place like I wanted. I only used the one screw as supplied and it wanted to rotate. Hopefully I can add another rail mount screw to fix this. I plan to keep using it for now, but I'm also going to try to work out some adjustments. I'm leaning towards epoxying all the joints in place once I get the exact mounting figured out. Right now I would consider this a great "starter" transducer mount. Something to buy first that has a ton of adjustability so that you can figure out exactly where you want your transducer and how deep, etc. Then once you know the dimensions you need you can look into buying something else that is sturdier and more permanent.
Recommended Products
$12.88
$ 5 .99 $5.99