Your cart is empty.
Your cart is empty.Product Description
YakAttack LeverLoc Anchor Trolley (AMS-1003)
The first anchor trolley designed specifically for the job, the YakAttack LeverLoc Anchor Trolley features a LeverLoc line clamp(A), which locks your trolley line in place with a simple “flip of a switch” motion. Keeping the trolley lines in line is the PadHook (C), a simple but clever design that combines the functionality of both a pad-eye and a hook, keeping even the tightest trolley lines in place on the side of the kayak, not over your gunwale. When not in use, the easy-knot trolley ring (B) snaps into the base of the LeverLoc, quietly secured until deployed. Includes 35’ of USA made 550 paracord (D) with a highly reflective tracer. Features YakAttack Stealth Pulleys (E) for super smooth operation.
- Easy installation
- New YakAttack Stealth Pulleys
- 35' of highly reflective USA-made 550 paracord
- Includes all necessary hardware for installation
- For heavy duty installation, check out the AMS-1004.
- Made in the USA
- Covered by our Built for Life Guarantee
- SKU: AMS-1003
joseph emery
Reviewed in the United States on September 23, 2024
The directions could be better with pictures etc
Franco
Reviewed in Mexico on September 23, 2024
Simplemente el mejor de su tipo, tanto en calidad como en funcionamiento.Algo caro en comparación con las demás opciones disponibles en el mercado, bien vale la pena.
Clintin
Reviewed in the United States on August 7, 2024
I had no clue what I was about to get into with the installation of this product. Luckily I am a certified YouTube video watcher and it was easy to install after watching the video online from the company.
ruski3:16
Reviewed in the United States on July 16, 2024
Easy install, terrible instructions, affordable and I can finally put my kayak in a almost any position to fish successfully - hardest part was sitting there with a drill knowing you're gonna be putting a bunch of holes in your kayak
herrprofessordoktor
Reviewed in the United States on September 30, 2023
Installed quickly on my Perception Pescador 12 with the guidance of some YouTube videos Be prepared to drill into your shiny new hull! I smeared some Loctite PL Marine on the screws to offer an extra seal but I can't say whether that's necessary. I would say some marine silicone sealant on the screws isn't a bad idea. Taking this rig out on the water, it worked like a champ. The trolley stayed secured and allowed me to change anchor position in shifting wind and currents.
Duane Harris
Reviewed in the United States on May 20, 2023
I was so apprehensive about installing the trolley system, but after receiving it and reading the instructions, I said “I can do this “! The insulation was quick and flawless. I would recommend this product to anyone who has a Yak. I have a 10.5’ Yak so the standard was fine for me. If you have a longer Yak or will be in a lot of current, I suggest the Yak Attack HD triley kit that has backing plates for better support. I’m very satisfied…
SayeretMatkal
Reviewed in Canada on August 15, 2022
Bought this as my first modification for my fishing kayak....Lots of instruction video available on Youtube on how to install, took me 20 minutes and I have used it multple times now, anchoring in current for fishing or near shore for lunch.....Do follow the instructions about the parachute cord streching (tie it loose and water and sun will tighten it up after 2 or 3 outings)
Ariel Redman
Reviewed in Canada on July 31, 2022
Just installed on my kayak.A bit challenging to place the line clamp on the Pelican kayak as it is built with two parts and there is a joint line running slightly above the waterline. I've added a backing plate to make the clamp level with upper portion of the kayak for easyer access.I would recommend adding long grip rivets to the kit and maybe some king of extension/plate for Pelican kayaks
Tim McLaughlin
Reviewed in the United States on June 28, 2022
I purchased this anchor trolley because it offered the simple install with all the same type of fastener.I watched the video from YakAttack for the install, i wished i would have not put the pulleys as close to the front and back like the video suggested. I would recommend going about a foot away from the front and back. with my install the rope has a tendency to fall down bellow the boat. as its a shorter path between pulleys. a foot off of the ends would have less of a curve to it and would likely stay in place as intended. Still works and is a good product.
Emmanuel
Reviewed in Mexico on March 24, 2022
Excelente para tamarack angler
Ted
Reviewed in the United States on November 20, 2022
I installed this with ease and I'm impressed with the quality of the components. I haven't tried it on the water yet but it certainly functioned flawlessly in my garage. I consider this to be great and extremely useful addition to my boat.
Russellferd
Reviewed in the United States on April 10, 2022
YakAttack makes great products and this one lives up to their standard. Better trolley than any of them I have bought in the past.I’ve found that I can get the line really taut on these by string the line before I attach the second screw on the front and rear pulleys. Once the loop is tied off, the line will stretch allowing you to pull the pulleys until they are straight up and down. The line will be nice and tight then, maintaining contact with the hull and it will function flawlessly.
Ricardo Alcántara
Reviewed in Mexico on February 19, 2020
Fácil instalación, me gusto, y todo viene en plastico para evitar oxidación y el ruido. 👍🏾
Recommended Products
$14.99
$ 6 .99 $6.99