Your cart is empty.
Your cart is empty.Product Description
The IASUS product ethos is to develop innovative, purposeful products without constraints. We use the very best materials and technologies that are available to create extreme products. Even within the IASUS product lines, we continue to seek new ways to improve with new generations to keep up with today’s new technologies.
The XSound 2.1R Helmet Speaker’s stainless steel chassis provides new amazing bass response and full-range output. Velcro attachments ensure the speakers are removable and will never lose their place.
The XSound 2.1R Helmet Speakers are compatible with any headphone or earphone device with a 3.5mm audio plug. Motorcycling, ATV, Snowmobiling, Snowboarding, Skiing, Skydiving, Paragliding and anything you can imagine.
- 3.5mm pin plug. It is compatible with most iPhone, Android, Samsung, Filo, EAR3, and some bluetooth comm systems like Sena Cardo (with 3.5mm headphone jack on the mount).
- Cable lengths (LEFT speaker: 49cm (15.8") RIGHT: 29cm (7.9"), with 100cm (40") extension cable with gold plated connectors.
- Equipped with the kevlar-reinforced wires to withstand 10 lbs of pulling tension in demanding scenarios.
- Designed and tested to be used with the IASUS REKON motorcycle comms, IASUS throat mic headsets and mobile amplifiers, IASUS Stealth Bluetooth headset, smartphones and portable music devices.
Audio Range
The XS2.1R brings your music to life with depth and clarity that standard helmet speakers can’t deliver. And they’re redesigned and engineered with a slim stainless steel chassis for fitment for any helmet.
Volume will vary when used with Bluetooth motorcycle headsets. Volume level depends on your headset and if it has sufficient wattage to drive them. Tested performance output 124dB; IASUS does not recommend long exposures at the highest volume as it may permanently damage your ears.
Chassis + Dimensions
The XSound 2.1R Helmet Speaker’s new stainless steel chassis with 45mm audio drivers inside provides exceptional bass response and full-range output.
Dimensions
1.77" (45mm) in diameter, 0.39" (10mm) thin
Kevlar reinforced wires for superior durability Left wire length: 19.29” (49cm) Right wire length: 11.41” (29cm)
Specifications
Max Power - 60 mW
Impedence - 64 Ohm
Frequency Range - 50Hz – 20kHz
Sensitivity - 125dB
Weight - 1.26oz (36g)
High Bass - Perfect for your audio
Compatibility + Install
Can be installed in less than 5 minutes.
The standard 3.5mm (1/8″) plug ensures connection with almost any mobile audio device.
The helmet speakers come with premium 3M Velcro that offers a perfect fitment to the helmet you use. Simply attach it inside the helmet and position the speakers directly on top of your ear for the best audio experience.
For wireless application, the speakers are compatible with the IASUS Rekon helmet comm system, smartphones (may need the 3.5mm dongle), mp3 music players and more...
What's Included
- Speakers – Left and right speakers
- Premium 3M Velcro
- Foam Spacers
- Foam Covers
TESTING BEFORE MOUNTING THE SPEAKERS IN YOUR HELMET
1. Test XSound 2.1 sound quality
Before mounting the speakers in your helmet, it is recommended to test and connect the helmet speakers directly to your smartphone or music player. Use the 3.5mm extension cable and hold the XSound 2.1 speakers to your ears as your music plays.
2. Find the optimal position on your ear
Position the XSound helmet speakers so that it is directly on your ear canal while wearing your helmet. You may need to make multiple adjustments until you reach the optimal positioning.
It is also recommended that the speakers touch the surface of your ears to avoid any loss of sound from the speakers.
3. Make sure there is enough space in your helmet for the speakers
Certain brands of helmet and headgear are designed for a tighter fit and may not accommodate our speakers. Please determine whether your helmet can comfortably accommodate the extra 1/2 inch of helmet speaker on each side before your purchase.
Modification to the helmet may be required.
**XSound 2.1 helmet speakers shown in the image above. Foam spacer can be purchased separately.
Scott Mauk
Reviewed in the United States on February 10, 2025
I have the Pactalk system and did not want to be changing my speakers from one helmet to the other because I did not want to wear out the velcro that helps hold the liners in. This was my answer to that, they are cheap priced but sound great.
Customer
Reviewed in the United States on January 22, 2025
Good quality sound and easy to install.
NiteHawk
Reviewed in the United States on August 3, 2024
I purchased these to put inside my motorcycle helmet. The quality seem a bit better than the speakers that came with my system. And the audio is loud enough to hear over my engine and wind noise. I started cutting the helmet foam just enough to place the speaker in and they extended out a little to touch the ear. This took out most of the wind noise since it was right on the ear. I rode like this to try it out. It was uncomfortable, so I made the cut a little deeper. I like this feel and installed it in permanently. Remember not to cut too much at one time. I cut a little at a time to keep the whole tight for the speaker and comfortable for my ears. But you do need to make sure they are in line with your ears, and they will work fine.
Orion
Reviewed in the United States on August 19, 2024
I had these in my helmet with my cardo HD, after awhile I bought the jbl audio out of curiosity, I was already impressed with these. After hearing the jbl audio I eas even more impressed by these. I let several people here these and the jbl and they couldn't tell the difference. Audio is extremely important to me as I'm a musician, and I can barely tell the difference between the two, for the price these are crazy good, they fit great, and they're almost as good as the jbl for half the price. Would buy again
Margaret
Reviewed in the United States on July 30, 2024
Bought these for my son's racing helmet. His car is not louder than a motorcycle but when it's on, he cannot hear, even at full volume. If the engine is off, he can here through the headphones. We even added the spacer so they're tight against his ear. Not nearly as loud as the description claims. Not good unless you just want to wear a helmet around for fun with no motors running.
LS
Reviewed in the United States on December 29, 2024
One ride in and the sound is good. About the same as others I've had. A couple of things to know, the cord is short and the fit is not universal. On the cord, it seems to be designed for an existing helmet system and not as a stand-alone item. The plug barely makes it to a chinstrap D-ring and does not come with an extender. As far as the fitment, the self-adhesive Velcro discs and accompanying foam standoffs do not fit the standard recess in an AGV helmet, which is the only one I've tried so far. Easy enough to trim with scissors but it does reduce the Velcro contact patches.
BFH
Reviewed in the United States on November 9, 2024
I use these in my motorcycle helmet with a Bluetooth adapter and they sound great louder than I thought they'd be. Sound quality is great been using them for 3 months without issues.
J.D.
Reviewed in the United States on November 22, 2024
Works well in ski helmet. You will want to make sure that your helmet is compatible with aftermarket speakers, not all of them are. Works in the motorcycle helmet too.Sounds is fair. Noting surprisingly good but they work.These are a little pricey.... I'd say they are on the line of being too expensive for a odd brand.
Recommended Products
$299.95
$ 99 .00 $99.00
$13.40
$ 6 .99 $6.99