Your cart is empty.

XGecu T76 Programmer 17 Adapters T56 Programmer Tl866ii T48 Replacement Support Eprom ISP IC Chip PIC NAND Flash EMMC GALCPLD VGA BGA Socket Tester Clip Socket

4.4 (1) Write Review

Free shipping on orders over $29.99

$327.95

$ 99 .00 $99.00

In Stock

Qty.:

The XGECU T76 programmer supports:T76 programmer is the update version of T56 programmer26, 27, 28, 29, 37, 39, 49, 50 series parallel ROM, EPROM, EEPROM;24, 25, 35, 45, 85, 93, 95 series serial EEPROM; P-NAND FLASH, customizable to add new chip models;SPI NAND (SD NAND/SD cards); EMMC/EMCP;microcontroller series programming;GAL/CPLD programmable logic device programming;VGA tool and VGA ISP programming;SRAM chip testing;High-performance 54/74F/LS/HC CMOS4000 series IC logic test. common EEPROM, EPROM, FLASH chips,support robust microcontroller and programmable logic device (GAL/CPLD) and with the capability to customize and add new chip models. the chip models will be updated normally.
The XGECU T76 features: high-performance 32-bit RISC-V MCU + FPGA controller, paired with a high-speed USB 3.0 Type-C interface. This configuration provides data transfer speeds up to 140MB/sec (EMMC 5.1 actual transfer rate), multiple times faster than traditional programmers! Whether you are reading or writing data, you will experience lightning-fast operation. EMMC 5.1 actual transfer rate up to 140MB/sec (8.4GB/minute).SPI NAND read speed up to 18MB/s.64 Gb P-NAND read speed of 30MB/S.
The T76 design: employs a high-density board design and comes with a high-quality USB 3.0 aluminum gray braided cable, ensuring stable and reliable signal transmission. In addition, the T76 offers comprehensive power protection mechanisms, including over-voltage, over-current, reverse connection protection, and low-voltage warnings, allowing you to program with peace of mind, worry-free.30% more internal components than T56, with a higher density board design.
Note: before you buy ,you can download the software or contact us to check the programmer whether support the chip typle,which adapter it need, then choose the adapter kit you need,thanks .Support : Windows XP,2003,2008,Vista Win7 WIN8 WIN10 WIN11
Package include:1*T76,USB cable*1, SOP8 clip*1,1*TSOP48 SOCKET,1*SOP44 SOCKET,1*SOP28,1*TSSOP28,1*SOP20,1*SOP8 200MIL,1*SOP8 150MIL,SOP16 150MIL,1*PLCC44,1*PLCC32,1*PLCC28,1*PLCC20,1*QFN8 5*6,8*6,1*TQFP32-100PIN BOARD,1*QFN32 BOARD,SOP8/16 ADAPTER,1*EXTRACTION TOOL.3*pin head

The XGECU T76 programmer IO design:Adopts a high-quality USB 3.0 Type-C aluminum gray braided cable for stable and reliable signal transmission.VCC voltage adjustable from 1.2V to 6.5V (64-level adjustable), and VPP voltage adjustable from 6.5V to 25V (64-level adjustable).IO communication signal voltage adjustable from 1.2V to 3.6V (64-level adjustable).VCC current limit adjustable from 120mA to 450mA, VPP current limit at 150mA, both with overcurrent protection.Supports 5V

Jim O.

Reviewed in the United States on April 2, 2024

So far I’ve only used it to read/write a few really old 27-series EPROMs, and it worked fine for those. Had it hooked up to a Windows 11 laptop, and the included software worked without any issues. Software was the typical free no-frills “made-in-Asia” stuff, but worked OK and did what I needed it to do. The one thing that I would like to see changed is that included in the package is a mini-cd - I assume that it contains the software and documentation. Unfortunately, the machine that I’m using with this burner is a laptop that doesn’t have a cd- drive. Fortunately, I was able to find the software, drivers, and a manual online, so I was able to get everything up and running. It would be nice, though, if everything was on a USB thumb drive instead, since fewer and fewer computers (especially laptops…) are coming with a cd-drive. Oh, well, everything seems to be working, so I guess that’s not too much of an issue…

Shopping Cart

Your cart is empty.

XGecu T76 Programmer 17 Adapters T56 Programmer Tl866ii T48 Replacement Support Eprom ISP IC Chip PIC NAND Flash EMMC GALCPLD VGA BGA Socket Tester Clip Socket