Your cart is empty.
Your cart is empty.Product Description
Package Included
- Flaring Cone x 1
- Flaring Bar x 1
- Blow Molded Storage Case x 1
- User Manual x 1
Package Information
- Package Dimensions: 9.45*8.66*2.76 inch
- Item Weight: 3.86 lbs
Specification
- Suitable for 3/16,1/4, 5/16, 3/8, 1/2, 5/8 and 3/4 O.D. inches tubings.
- Recommended for flaring soft copper, brass, aluminum and mild steel tubing through a wall thickness of 0.035 inches.
Wide Application
Fits all standard high pressure fittings. Ideal for:
- HVAC
- REFRIGERANT
- LIQUIDS
- GAS
Heat Treated Hardened Off-Set Eccentric Steel Cone
- Features a durable eccentrically-mounted, hardened steel flaring cone for even metal flow.
- Produces a rolling action for uniform flare walls without galling in tubings.
Flaring Bar - Clever Clutch Yoke Mechanism
A single clamp screw provides for easy clamping and removal of tubing, large feed screw handle for smooth turning with little effort, easy to operate.
Rob_32002
Reviewed in the United Kingdom on February 16, 2025
did the job for brake lines.this is flare tool with a conical flare / taper flare.The originals were bubble flare. But the tool I had previous would not flare properly. So sent it back.The taper flares sealed ok and would therefore recommend this tool- its robust and easy and easier to understand how to use and clamp the line for flaring, Also once flared it has a clutch so you know when flare is complete
A. Coops
Reviewed in the United States on January 21, 2025
Very happy with this tool. Does the job well.
Al R.
Reviewed in the United States on January 17, 2025
This worked great to flare pipes for my mini split.
Chrystal McDaniel
Reviewed in the United States on January 1, 2025
Great product and easy to use. Suggest using a little Lub to keep from scratching head. Overall use was, it did what was needed. The product performed as well as advertised. Will use again.
G-man
Reviewed in the United States on August 26, 2024
This was the cheapest for this type of flaring tool, as I only need it to flare a set of mini split lines. It worked great once I worked out all the casting sand with multiple WD40 flushed.
Sailracer
Reviewed in the United States on August 18, 2024
I'd never made a flare before using this tool. It was easy to use and did a great job making the flares. My first practice flare was a little short, so I adjusted how much the tube was sticking up and made perfect flares from then on out.My only complaint about the tool is it only fits in the case with the clamp and flaring tool screwed all the way in, which is the exact opposite of how the tool is configured when you are starting or finishing a flare, so you have to waste time screwing and unscrewing them at the start and finish of your work. It's a minor thing, but the kind of attention to detail that can make a tool stand out from the competition. No stars off for that, just a note for the case designers.
TxSteve
Reviewed in the United States on May 14, 2024
First - this is an eccentric flare tool.Second - it flares to 37 degreesThird - it has a clutch that will disengage when the correct flare has been reached. You can't overtighten.All that to say that if you make a nice square cut on the copper, debur well, and install with about 1mm above the flared area, you will get a very good flare.I've used it to install 2 mini splits with no leaks.I also used Nylog Gasket sealer on the flare - not on the threads. Just spend a few bucks for a bottle.***Don't forget to put the nut on the tube before flaring or you'll be doing a second flare. Ask how I know.
Kindle Customer
Reviewed in the United States on December 16, 2024
I made the mistake of borrowing out my tool box. Came back without half my flaring tool. This unit is as good as my Rigid Model 345 that currently cost around $140. It has the "Click" at the end, letting you know the flare is complete. I've only used it twice, but it's easy to see the quality of this is as good as Rigid and it'll last.
gherghe adumitroaei
Reviewed in the United States on November 18, 2024
Works great and look sturdy well built. I hope it will last a long time
Hire Purchase
Reviewed in Canada on November 17, 2024
Used this on copper lines for my mini split. Couldn't find my automotive faring tool, so I purchased this. What a nice tool. Found it does really nice flares.
Hector M Guzman
Reviewed in Mexico on October 20, 2024
Deja el acabado perfecto
Diego T.
Reviewed in Mexico on January 16, 2024
Excelente producto muy buena calidad
Jane Hibbs
Reviewed in Australia on September 16, 2022
Works well providing a smooth even flare.
Recommended Products