Your cart is empty.
Your cart is empty.Product Description
Compatible with:
- 2004-2017 Nissan 350Z
- 2009-2020 Nissan 370Z
- 2017-2021 Nissan Armada
- 2002-2004 Nissan Frontier/Xterra
- 2014-2020 Nissan GT-R
- 1995-2008 Nissan Maxima
- 2003-2006 Nissan Sentra
- 1993-2006, 2019-2020 Nissan Altima
- 2003-2007, 2009-2014 Nissan Murano
- 2004-2009, 2011-2017 Nissan Quest
Replace Part Number:
- 5S6627
- 18-0825
- 71-3603
- 2502-306621
- 289111E400
- Check the number for reference to make sure the fitment in case you get the wrong one.
Description:
- The Wiper Washer Windshield Fluid Level Sensor is a sensor used to monitor the fluid level of an automotive windshield washer. It is usually installed in the scrubber level storage container or in the scrubber level sensor assembly.
- The function of the sensor is to detect whether the liquid level of the scrubber reaches the set standard. When the scrubber level is too low, the sensor sends a signal informing the driver that the scrubber liquid needs to be added. This helps ensure the proper operation of the windshield cleaning system and keeps the driving line of sight clear.
- Through the use of this sensor, the driver can timely understand the situation of the scrubber level and avoid the situation of insufficient level when the windshield needs to be cleaned. This helps provide better driving safety and visibility.
Jalen Johnson
Reviewed in the United States on February 2, 2025
This product arrived quickly and was very easy to install. It took a little bit of effort but saved me over $600 per a quote to replace the entire reservoir (‘required’) from the dealership. Fits like a glove and the windshield washer fluid light has been off ever since, works like the original equipment.
am
Reviewed in the United States on January 27, 2025
I have a 2019 Nissan Armada, and this worked perfectly. The hardest part was taking off the wheel to get to the tank to replace the part. It came with an o ring which was super helpful.
Sinflow29
Reviewed in the United States on January 24, 2025
Fixed my issue. Was a pain to remove and reinstall but it's not too difficult to do.So far still working. Just don't add water to your reservoir lol
FrankO
Reviewed in the United States on May 31, 2024
My 2018 qx80 kept saying my fluid was low (probably because I had used the windshield fluid with rainx)So removing the factory one was tight based on the location, but when installing this one, I tried all kinds of methods (lubed the o-ring with oil, then tried inserting it with /without twisting it ) and was not able to get it to fit. After I was done I had damaged the replacement so I ended up just leaving it unplugged
William Hill
Reviewed in the United States on February 13, 2024
My truck still says it has low fluid
Checkmate
Reviewed in the United States on November 27, 2024
I purchased this to replace my faulty washer fluid level sensor, which had worn out over time. The fit is snug, and you might need to put some effort into removing the old sensor. Thankfully, this replacement includes a new gasket and pops right into place. The installation process is straightforward—I’d rate it a 2/10 in terms of difficulty.
Rod M
Reviewed in the United States on October 25, 2024
Fits perfectly, pull the bad sensor with long noise pliers then install the rubber O ring seal first then push the assembly in as hard as you can until it snap on the rubber gasket seal. Done! Took me 5 mins to pull and install the new item. 30-45 total work. Dealer is charging me $600 for this service. I rather DIY and it took me less than an hour.
MIA
Reviewed in the United States on October 20, 2024
Perfect fit and works well for 2019 Nissan Altima SR
Recommended Products