Your cart is empty.
Your cart is empty.Product Description
Universal Windshield Washer Nozzle Fluid Hose Kit, Suitable for Most Car Windshield Washer Nozzle, Connect Car Water Pump with Windshield Nozzle
I Type windshield wiper hose connector
Three shapes (T-type, Y-type, I-type) of connectors are available to meet the needs of different cars
Y Type windshield wiper hose connector
Windshield washer fluid hoses that are long enough (4 meters long) to be cut as needed
T Type windshield wiper hose connector
The hose is easy to cut and install, and the connectors are simple to attach. No special tools are required
cg
Reviewed in the United States on March 7, 2025
I needed replacement hoses since my OEM ones were chewed through by rodents. This replacement hose seems to be OEM quality and fit my existing connectors perfectly. I also now have more than enough extra if this happens again.
cg
Reviewed in the United States on March 7, 2025
I needed replacement hoses since my OEM ones were chewed through by rodents. This replacement hose seems to be OEM quality and fit my existing connectors perfectly. I also now have more than enough extra if this happens again.
skidoogirl
Reviewed in the United States on February 13, 2025
Ended up not using this, but us good to have around
skidoogirl
Reviewed in the United States on February 13, 2025
Ended up not using this, but us good to have around
redbluejay777
Reviewed in the United States on January 11, 2025
Easy to install, worked as described to replace cracked line.
redbluejay777
Reviewed in the United States on January 11, 2025
Easy to install, worked as described to replace cracked line.
Dura muy poco
Reviewed in the United States on August 1, 2024
Las mangueras son buenas, lo malo es que los conectores de plástico son de baja calidad y se rompen fácil.
Dura muy poco
Reviewed in the United States on August 1, 2024
Las mangueras son buenas, lo malo es que los conectores de plástico son de baja calidad y se rompen fácil.
Lee
Reviewed in Australia on May 13, 2024
It came quick and was exactly as described,
Lee
Reviewed in Australia on May 13, 2024
It came quick and was exactly as described,
Louis Obregon
Reviewed in the United States on December 30, 2024
worked as described
Louis Obregon
Reviewed in the United States on December 30, 2024
worked as described
R. Boyd
Reviewed in the United States on December 2, 2024
I was able to get the new tube to fit over the existing tube with the help of a shot of silicon spray.Works fine.
R. Boyd
Reviewed in the United States on December 2, 2024
I was able to get the new tube to fit over the existing tube with the help of a shot of silicon spray.Works fine.
Gerald S.
Reviewed in the United States on November 14, 2024
This kit is good quality. Good rubber tube, and many connectors. Worked for me.
Gerald S.
Reviewed in the United States on November 14, 2024
This kit is good quality. Good rubber tube, and many connectors. Worked for me.
Andrew Macadam
Reviewed in Australia on April 2, 2024
Very happy with it easy to install.
Andrew Macadam
Reviewed in Australia on April 2, 2024
Very happy with it easy to install.
Edmundo
Reviewed in Mexico on May 1, 2023
Es lo que necesitaba y llego a tiempo 👍
Edmundo
Reviewed in Mexico on May 1, 2023
Es lo que necesitaba y llego a tiempo 👍
Hyucksun Kwon
Reviewed in the United Arab Emirates on March 27, 2023
installed to my car and no leakage.
Hyucksun Kwon
Reviewed in the United Arab Emirates on March 27, 2023
installed to my car and no leakage.
Nonizi
Reviewed in Saudi Arabia on December 19, 2023
The items was as described, thanks
Nonizi
Reviewed in Saudi Arabia on December 19, 2023
The items was as described, thanks
Butch Simmz
Reviewed in the United States on September 27, 2022
My washer nozzles weren't spraying any fluid onto the windshield when I pushed the lever on my steering column so I purchased this kit. After removing the hood insulator I saw that one of the plastic connectors linking the hose sections together had disintegrated rendering the entire system inoperative. I used a straight connector from the kit provided, and linked the two sections of hose together. I clipped about a quarter inch of brittle and flared out old hose from each end to ensure a tighter more secure, and leakproof fit. Luckily, the new connector was of a sufficient length that the two shortened hose ends could be pushed onto the flared ends of the new connector without any other modifications. I tested it and the system is now functioning perfectly. This procedure necessitated that the eight plastic clip/rivets securing the hood insulator to the vehicle be replaced, as they all broke when I pried them out of their holes. It is advisable to have a fresh package of these at the ready as the old ones are very likely not reusable. (each make of vehicle is likely different so check your fastener part numbers) I determined the part number for these fasteners and ordered a generic replacement that worked perfectly. I was able to purchase a package of 100 for $12.00, less money than the dealership would have charged for the 8 that were required for my vehicle! The total cost to repair thus was about $20 probably one tenth of what the dealership would have charged. The time required for the procedure was less than 30 minutes including removing/replacing the hood insulator and the hose repair itself. Another successful DIY endeavor!
Butch Simmz
Reviewed in the United States on September 27, 2022
My washer nozzles weren't spraying any fluid onto the windshield when I pushed the lever on my steering column so I purchased this kit. After removing the hood insulator I saw that one of the plastic connectors linking the hose sections together had disintegrated rendering the entire system inoperative. I used a straight connector from the kit provided, and linked the two sections of hose together. I clipped about a quarter inch of brittle and flared out old hose from each end to ensure a tighter more secure, and leakproof fit. Luckily, the new connector was of a sufficient length that the two shortened hose ends could be pushed onto the flared ends of the new connector without any other modifications. I tested it and the system is now functioning perfectly. This procedure necessitated that the eight plastic clip/rivets securing the hood insulator to the vehicle be replaced, as they all broke when I pried them out of their holes. It is advisable to have a fresh package of these at the ready as the old ones are very likely not reusable. (each make of vehicle is likely different so check your fastener part numbers) I determined the part number for these fasteners and ordered a generic replacement that worked perfectly. I was able to purchase a package of 100 for $12.00, less money than the dealership would have charged for the 8 that were required for my vehicle! The total cost to repair thus was about $20 probably one tenth of what the dealership would have charged. The time required for the procedure was less than 30 minutes including removing/replacing the hood insulator and the hose repair itself. Another successful DIY endeavor!
Recommended Products
$24.96
$ 11 .99 $11.99