Shopping Cart

Your cart is empty.

Your cart is empty.

Window Visors for Toyota Camry 2018-2024, Rain Guards Shields Vent Shade Deflector Dark Smoke 2019 2020 2021 2022 2023, Tape-On, 4PCS

Free shipping on orders over $29.99

$36.29

$ 18 .99 $18.99

In Stock

1.Size:For 03-09 4runner


About this item

  • 怐Fitment怑 - For Toyota Camry 2018-2024 XV70 for all Trims L LE SE XLE XSE Hybrid. Please be advised that the visors are vehicle specific. Please check your vehicle's compatibility to ensure proper fitment.
  • 怐Durable Material怑 - Made of high quality modified acylic material, the set of rain guards will not be easy to crack, break, or chip.
  • 怐Effective Design怑 - The window visors are designed for the exact model of each vehicle, which helps reduce interior wind noise and mirror fogging, letting fresh air in and keeping the rain drops out at the same time.
  • 怐EASY STICK ON STYLE怑- NOT IN-CHANNEL STYLE.. Use the heat gun or hair dryer to heat the mounting edge after you put on the visors. This is highly recommended and helpful to stick the visors firmly, espcially in cold days.怐NOTE怑Test fit the visors first to make sure it's the right model before you tape the visors on.
  • 怐Warranty & Support怑 - 1-YEAR WARRANTY. We strictly follow Amazon Return & Refund policy. Please feel free to contact us if you have any questions, and we will reply ASAP.



Product Description

1

Feature

1

Upgrade Material

Tough and very durable to use, Keep Flexible and won't break

1

3D Design

High Transparency, Shatterproof

1

Custom Fit

Accurate measurements and specifications

1

Tape on Design

Reduce the wind noise while driving

1

Let Fresh Air In

Can keep windows open slightly to get fresh air while it is raining or snowing, Easily and Convenient to Breathe Fresh Air in different Occasions

1

Easy Installation

Just Attach with automotive grade adhesive along the original installation Place, no special tools required

1

Instructions

Step 1

Step1

Clean the mounting surface with the glass cleaner.

Step 2

Step2

Test fit the visor to make sure it's being installed on the correct side.

Step 3

Step3

Carefully remove the protective tape, hold the visor over the area and line up the visor properly to make sure of the installation angle.

Step 4

Step4

Run your thumb firmly over the mounting surface to ensure the fit.

warm tips

INSTALLATION TIPS

  • Test fit the visor to make sure it's being installed on the correct side before you attach it on the vehicle.
  • To further enhance the proper adhesion, heat the mounting edge of the visors with a heatgun or a hair dryer after you put the rain guards on your vehicle.
  • We suggest not to wash your vehicle with pressurized water for the next 48 hours after the installation.

nate bunton
Reviewed in the United States on February 9, 2025
Fit good, look šŸ‘šŸ¼! Clean with alcohol/soap before installing, light heat gun application if peeling occurs
TKParker
Reviewed in the United States on February 5, 2025
I really like these window visors they just make life easy, especially in less than optimal weather; super easy to install just remove the 3M auto tape. Yes it’s branded 3M that guarantees that they won’t fly off down the highway.Then just rub them with the towel.Let them cure for 24 hours and your set; but be careful those edges are sharp that’s why I recommend the towel.
Wil M.
Reviewed in the United States on February 26, 2025
Rarely do I write reviews but I’m going to save someone else from this.I pulled my truck into my shop and cleaned the surface with soapy water and wax and grease remover then dried it. So should have no problem sticking from that alone but still I used a heat gun to promote adhesion. Yet 1 day later when I drive 65-70 the guards start coming loose towards the front and flap in the wind.On top of that the shape of them doesn’t fit quite right on my truck. It’s a 08-13 style Silverado. They don’t have enough curve to match the window so it goes out a little far and I’m guessing that’s why it’s not sticking on properly. The rear ones (extended cab) are holding up fine though.
WAYNE
Reviewed in the United States on January 30, 2025
Simple install but just make sure to check placement prior to removing the tape cover. The 3m tape sticks good and can stretch if stuck and removed. I've done that before so just a tip for first timers.
Yesikherandy
Reviewed in the United States on January 29, 2025
Fit my 2009 toyta Camry se perfectly withstands car washes, snow, rain for my car, I used the 3M tape it came with just make sure to heat it up well with a blow drier or something and it will stick good
joeyluna1313
Reviewed in the United States on January 27, 2025
Great easy fit zero problems and great price
Daniel delgado
Reviewed in Mexico on September 12, 2024
Buenos materiales y se ve de calidad
Will
Reviewed in Canada on May 29, 2024
Look good and are tough. The only issue I’m having is the window doesn’t track properly and conflicts with the plastic when window is completely down. Going to try and use double sided tape to hold plastic to too outside weather strip so window will track properly
Excelente producto y llego mucho antes
Reviewed in Mexico on February 2, 2024
Llego muy bien empacado
Gerardo garza
Reviewed in Mexico on December 8, 2024
Buen material son flexibles
BakerBabe84
Reviewed in the United States on December 2, 2024
The rear window guards did not fit correctly. They were not flared out enough for the ability to open the window. However, the front guards fit just fine and work for rain protection as they should. That's why I'm still giving them 3 stars. The front windows is what I really needed them for anyway. Super easy to install too.
WARRENS
Reviewed in the United States on December 14, 2024
Installed on my 2007 Chevy Express and it went out n easily and fit very well. Happy with the quality and fit. Thank you.
Monserrat Mendoza
Reviewed in Mexico on November 1, 2024
Esperamos que dure mucho
Recommended Products