Your cart is empty.
Your cart is empty.Product Description
Printer Bed
Blue painters tape sticks well to common 3D printing beds. Stripes of tape can be applied to the build platform surface and easily removed or replaced when ready to do a new project. It adheres well to the print bed and leaves no residues behind.
Blue Painters Tape
Premium Quality
Blue painters tape is the preferred use for 3D printing projects. Using our wide painters tape will make it easy to cover your whole printer bed. By applying blue tape to the print bed, you will be able to remove the 3D print from the bed with ease when done printing
Painters masking tape has a 21-day clean release allowing you not to rush your painting job for a more efficient and precise outcome
Works well with a variety of surfaces such as: painted walls, door trim, glass, wood-work and metal
- Can withstand up to 190°F/87°C heated beds and the heat of the filament.
- Leaves no residues behind
- Available in several widths 4”, 6”, 9”, and 12”
BLUE TAPE FOR PAINTING
Scott F.
Reviewed in the United States on August 4, 2024
I can get over 250 prints with us if not more. if it doesn’t rip when I pull the print off. I simply flip the plate over with the tape on it while the printer heats up and it flattens it right back out and stick it to the plate so maybe even 400 prints. sometimes when I’m printing smaller parts if it does rip the tape, I can do the same thing and just pick a different spot on the plate and it doesn’t mess up all the tape just that one small section. It’s a little difficult to get all the tape off the role is with my feet and unroll a couple inches at a time lay it sticky side up and put my plate right on top of it, cut it with a razor. I don’t roll it over the sides of the plate. I just leave it as is.
Rich Downing
Reviewed in the United States on August 24, 2024
It’s a little hard to work with bc it’s so wide but that’s me and not the product. Otherwise this was very effective painters tape.
Mike
Reviewed in the United States on March 28, 2024
I picked this up to use with my 3D printer and Laser.It states it's easily removable.....it's NOT.It's tough to get off the roll because it's so sticky. If you manage to get a large enough length off the roll without it ripping, consider yourself lucky.I tried using it on a piece of acrylic and also a piece of baltic birch and on both items, it was a nightmare to remove. It left so much glue residue that the baltic birch had to be sanded and I had to use some goo-gone on the acrylic.Don't waste your money on this tape.
Just-In-Time
Reviewed in the United States on March 2, 2024
I saw the reviews and was nervous about buying this. I have now used over half the roll on projects with my laser engraver and even if the edge pick up a little bit dust or crap from the work area it still has worked amazing. It peels extremely smoothly and if you fold over the edge when done starting the next piece is super simple. I have used it on everything from Glass, wood, aluminum, to acrylic. I will being buying it again and would HIGHLY RECOMMEND anyone else to buy it also.
BV
Reviewed in Australia on June 15, 2023
Bought this to use to mask off when using the laser engraver - really good width avoids having to put 5 or so thin strips of tape thus covering the surface more thoroughly. Really thick good quality.
Angela Dey
Reviewed in the United States on March 24, 2023
I thought I might have trouble ripping pieces straight down but it's actually super easy. I'm using these to stick to the back of wood pieces that I'm adding resin to and the tape pulls off the wood pretty easily but leaves a sticky residue on the resin sometimes. I wonder if it's because I'm adding heat to cause the resin to cure faster. Otherwise, the tape works great, is easy to tear to the size I want, and pulls off the wood with no problems.
kittyandbean
Reviewed in the United States on June 4, 2021
This tape is just the right size to completely cover the bed of my Silhouette Alta + machine and much more cost effective than buying Silhouette brand adhesion circles, which cost at least $1 each. I have no problem with the PLA filament adhering to the tape. Tip: Dab alcohol on the tape to loosen it from the completed project. I use my fingernail to scrape the tape from the print -- it comes off easily. I will buy more of this tape when the time comes.
Joseph Rivas
Reviewed in the United States on June 13, 2021
I bought this to minimize the amount of burn from my laser and it works really well. Sometimes it doesn’t stick all that well but could just be the material.
joe laurence
Reviewed in the United States on November 10, 2020
Works well and fits perfectly on the flashforge finder bed.Advice:For good adhesion, use a small hand held roller or scraper to smooth and press the tape over the surface and it will not lift off the bed during printing. I took one star off because when using glue, sometimes the tape would bubble a little. It has not yet affected any of my prints.
Recommended Products
$23.99
$ 11 .99 $11.99