Your cart is empty.
Your cart is empty. Specifications
Product Name: BA9S LED Bulb
Socket: BA9, BA9S, 53, 57, 357, 1895, 64111. etc.
Lighting source: built in 2835 chips Bulb feature: 360°lighting
Working voltage: 12V DC (9-16V DC)
working temperature:-40°C- 55°C
warranty:1 year ( used in normal condition ).
Usage:The width light, reading light, car dome light, door handle light, side turn light, trunk lamp,boot light,dash instrument Light. etc.
BA9S lamp compatible socket bulb number: 1815, 1816, 182, 1889, 1891, 1892, 1893, 1895, 1895A, 1445, 17053, 53, 53X, 57, 216, 293, 363, 3886X, 3893, 6253, 64111, 64113, 64115, 756.
Note
Please confirm the bulb size you need before your order, you could confirm your bulb size on internet or contact us.
This is bulb is error free for 99.9% most vehicle for interior light. (but some european vehicle model like Mercedes benz might pop up error message when you install it as exterior light)
Package
Products include: 10-pc BA9S LED Bulbs
Unique feature
>>Smooth lighting, super penetration rate and refractive rate projector lens.
>>Appearance smooth, never fade, exquisite design, better heat dissipation performance.
>>Frosted lens are connected seamlessly at 160 degree high temperature, achieve waterproof level.
MA
Reviewed in the United States on October 25, 2024
Globe did not work
Outspoken RN
Reviewed in the United States on January 19, 2024
These are perfect for all the Japanese motorcycles from the 70’s! They fit in the speedometer and tachometer, as well as the idiot lights on the cb550/ cb500 models. Makes seeing the neutral indicator possible in direct sunlight and makes the gauges really shine bright at night
Terry Martinez
Reviewed in the United States on July 28, 2022
I had to replace the marker lights on my 1970 Roadrunner trailer. Initially, I was going to replace the old lights with LED Markers but due to the cost, I decided to replace the bulbs. I was impressed with the brightness of these bulbs, and the cost was much less than buying them at Autozone.
carmudgeon
Reviewed in the United States on February 15, 2021
Great upgrade. Retrofitted these into the dash lights and shifter indicator on a 1965 Mustang. Good color combination for factory dash. However, they don't work on the (combined) turn signal indicator on that particular vehicle as it has a reverse polarity on one of the directions but this is a vehicle specific issue not a bulb issue. Also, since they don't have any significant electrical load to them, the dash light dimmer on the headlight switch doesn't work. A person could put a load resistor in there if they were willing but I'm fine with bright dash lights.
Paragape
Reviewed in the United States on April 4, 2021
I used these to replace the instrument lights on my 40 year old Honda GL500 motorcycle. They are perfect for the backlights of the speedometer and tachometer, but are so bright that I had to use the ND6 gel (see https://www.amazon.com/dp/B08818V6Y2/ref=cm_sw_r_cp_apa_glc_fabc_TNNR007REJJ6Z4PJ0BMW?_encoding=UTF8&psc=1) to reduce the brightness for the turn signals and neutral light because at night they were blinding! I have been using them several weeks now and they are working great! The pack of ten was great because I needed 9 lights altogether. I love the white light in place of the incandescent yellow of the original lights!
Rebecca Grace
Reviewed in the United States on September 5, 2020
Bought these for my husband's 1973 Datsun and he is SO excited about them. They fit perfectly, work perfectly as-is with no modifications and they are so much brighter than the old lights. Now he can actually see the speedometer, even when driving at night!
Joseph L. Baba Jr.
Reviewed in the United States on December 8, 2019
I found these bulbs also work on 12 V "AC" current. I have a bench Power Supply for low voltage AC or DC, and I forgot to switch to DC and the bulbs worked. I know some LED are either AC or DC, so, these as SHIPPED, may be mislabeled. They also work fine on DC
vito
Reviewed in the United States on April 27, 2019
These are very bright, however, the polarity is backwards. I used them to replace some #1893 bulbs and the polarity was backwards on every one of them. There is a slip of paper in the package warning the polarity may be wrong and the paper says to reverse the bulb. However, these bulbs are not reversible as they connect on one bottom terminal and on the barrel (which should be ground). I had to cut and re-solder the wires for the bulbs to work.Also, the bottom "barrel" is slightly smaller than the standard bulb, so they can pull through the holder.Use with caution.
Recommended Products
$28.91
$ 14 .99 $14.99