Shopping Cart

Your cart is empty.

Your cart is empty.

Whirlpool WP9760771 Broil Element, Black

4.8 (16) Write Review
Free shipping on orders over $29.99

$82.94

$ 39 .99 $39.99

In Stock
  • The Whirlpool Broil Element is a genuine OEM (Original Equipment Manufacturer) part designed and engineered to exact specifications
  • Whirlpool Broil Element is located at the top of the oven and supplies
  • Whirlpool WP9760771 supplies the heat for broiling on electric ranges
  • The high quality Whirlpool Broil Element replaces 9760771, 4456103, PS11747303
  • Repair your appliance with confidence when you choose Whirlpool Broil Element


The high quality Whirlpool Broil Element (WP9760771 ) is located at the top of the oven and supplies. The Broil Element supplies the heat for broiling on electric ranges and replaces 9760771, 4456103, PS11747303. Please be aware that it is recommended to use saftey equipment and to disconnect the appliance from all utilities prior to any service or repair. Please refer to your owners manual to confirm part numbers and for instructions as some repairs require a trained service professional to complete.


jmac
Reviewed in the United States on January 9, 2025
Exact match replacement for my Whirlpool oven. Original broiler element had burnt out, and I had the new replacement installed in less than 15 minutes. I did have to replace the screws as the heads were rather rusty --screw thread size was 8-32.
jmac
Reviewed in the United States on January 9, 2025
Exact match replacement for my Whirlpool oven. Original broiler element had burnt out, and I had the new replacement installed in less than 15 minutes. I did have to replace the screws as the heads were rather rusty --screw thread size was 8-32.
Sbjkiss
Reviewed in the United States on September 23, 2024
Just took a few minutes but the internal temperature gauge was another of the problems. I ordered that too afterward which fixed the problem
Sbjkiss
Reviewed in the United States on September 23, 2024
Just took a few minutes but the internal temperature gauge was another of the problems. I ordered that too afterward which fixed the problem
Kindle Customer
Reviewed in the United States on August 6, 2024
This product does what it said. It was easy to install and worked like it should.
Kindle Customer
Reviewed in the United States on August 6, 2024
This product does what it said. It was easy to install and worked like it should.
Jean Victor
Reviewed in the United States on May 23, 2024
Did not need to replace our 18 yr old oven. Just needed to replace this part. Half an hour of work. Perfect.
Jean Victor
Reviewed in the United States on May 23, 2024
Did not need to replace our 18 yr old oven. Just needed to replace this part. Half an hour of work. Perfect.
JLH
Reviewed in the United States on July 9, 2023
Worked as intended after I installed it. Do yourself and favor when and if you install this yourself. Once you loosen the screws at the top of the existing unit and it hangs down, Do NOT just yank it out. If you do and one of the electrical clamps that attaches to it gets caught on the metal around the opening, it will fall back down and disappear. Or if there is a lot of tension on the wire it is attached to, and the installer did not leave hardly any extra wire in there, the same thing will happen. In spite of having had this happen to me once before, it happened again on this one. I had two binder clips handy with the intention of attaching a clip to the wire and clamp after removal so neither would fall back down before I attached them to the new unit. It did NOT occur to me that one of the clamps would get hung on metal as I pulled it out and would still cause quite a problem. It took a few minutes to fish it back out. Sometimes you can do that, sometimes you can't. I really did not want to pull this thing out of the wall and take the back apart to get to that wire. Fortunately, there was enough extra wire in there, so I could fish it, pull it up to the opening and keep pulling till the clamp came back up to its intended spot.If I ever have to do this again, I will not only have clips on hand to attach to the wires once exposed, but I will have two pairs of needle-nosed pliers on hand to grab those clamps BEFORE I attempt to pull the existing unit out of the back of the oven. I will use the pliers to pull the clamps out and the wire will come with them. Then I will attach to binder clips to keep them in place.
JLH
Reviewed in the United States on July 9, 2023
Worked as intended after I installed it. Do yourself and favor when and if you install this yourself. Once you loosen the screws at the top of the existing unit and it hangs down, Do NOT just yank it out. If you do and one of the electrical clamps that attaches to it gets caught on the metal around the opening, it will fall back down and disappear. Or if there is a lot of tension on the wire it is attached to, and the installer did not leave hardly any extra wire in there, the same thing will happen. In spite of having had this happen to me once before, it happened again on this one. I had two binder clips handy with the intention of attaching a clip to the wire and clamp after removal so neither would fall back down before I attached them to the new unit. It did NOT occur to me that one of the clamps would get hung on metal as I pulled it out and would still cause quite a problem. It took a few minutes to fish it back out. Sometimes you can do that, sometimes you can't. I really did not want to pull this thing out of the wall and take the back apart to get to that wire. Fortunately, there was enough extra wire in there, so I could fish it, pull it up to the opening and keep pulling till the clamp came back up to its intended spot.If I ever have to do this again, I will not only have clips on hand to attach to the wires once exposed, but I will have two pairs of needle-nosed pliers on hand to grab those clamps BEFORE I attempt to pull the existing unit out of the back of the oven. I will use the pliers to pull the clamps out and the wire will come with them. Then I will attach to binder clips to keep them in place.
Lorri Willits
Reviewed in the United States on March 10, 2021
This product was cost effective and easy to install and fixed the oven! No issues and working great.
Lorri Willits
Reviewed in the United States on March 10, 2021
This product was cost effective and easy to install and fixed the oven! No issues and working great.
MAC
Reviewed in the United States on November 6, 2019
I had to send my oven control board out for repair, as it had malfunctioned. After repair, one of the broiler coils was still not working, as I swapped the broiler coils in my double oven to verify it was the coil. It had damage that i had not previously noticed. So i bought this new broiler coil, using tape to keep wires from falling back in as others had mentioned online, and replaced the old coil. Now my double oven is fully functional again.
MAC
Reviewed in the United States on November 6, 2019
I had to send my oven control board out for repair, as it had malfunctioned. After repair, one of the broiler coils was still not working, as I swapped the broiler coils in my double oven to verify it was the coil. It had damage that i had not previously noticed. So i bought this new broiler coil, using tape to keep wires from falling back in as others had mentioned online, and replaced the old coil. Now my double oven is fully functional again.
ES
Reviewed in the United States on November 20, 2019
Super happy with this purchase. It took my hubby about 15 minutes to install. So far working perfect. Great price for a quick DIY repair.
ES
Reviewed in the United States on November 20, 2019
Super happy with this purchase. It took my hubby about 15 minutes to install. So far working perfect. Great price for a quick DIY repair.