Shopping Cart

Your cart is empty.

Your cart is empty.

Whirlpool 72017 Touch Up Paint, 0.6 Fl Oz (Pack of 1), White

Free shipping on orders over $29.99

$6.49

$ 2 .99 $2.99

In Stock

About this item

  • Manufacturer model # 72017
  • Genuine Replacement Part
  • Whirlpool item


Product Description

This is a genuine replacement part.

From the Manufacturer

This is a genuine replacement part. The model number and name for the following item is: Whirlpool 72017 Touch Up Paint


DeAnn B.
Reviewed in the United States on February 19, 2025
At first I was concerned about the color when I was applying it but it dried to a perfect match.
Robert P
Reviewed in the United States on January 20, 2025
Worked out perfect!
Sandy iniguez
Reviewed in the United States on January 19, 2025
We got one big chip and one small one not sure how it happened my stove is a GE. This product was the closest I can get and worked great! The picture are with 2 coats of paint. You have to be patient and careful. The second coats on the small chip looked smeared and ugly so while the paint was wet i wiped it off easily with a paper towel and started over again. 100% recommendations this product.
John
Reviewed in the United States on August 14, 2024
Perfect match
Deborah Dyer
Reviewed in the United States on February 27, 2024
Easy to apply and it matched my stove perfectly. Dries fast.
john aptiv
Reviewed in the United States on January 27, 2024
I have an old Frigidaire gas range. Had a strip about 2 inches long ,1/8 to 1/4 inch wide below the glass that had rust and no paint.I took the door apart so I could remove and clean the glass (2 pieces of glass between inside and outside so had to take it apart to clean the glass). Sanded the area with 440 grit emery and painted it 3 coats. Looked good after 2. Touched up a few minor spots also. Sorry don’t have a before picture.Also touched up a spot on my newer refrigerator.. 1 coat there.It really looks good and color blends in perfectly.
Peter M
Reviewed in Canada on June 6, 2019
Appliances can get chipped over time and this masks that.
louise
Reviewed in Canada on August 21, 2017
Well, the bottle is very small but the paint is easy to apply and the result is, the scratches on top of our 15 years old freezer are no longer visible.Although the freezer is not as white as the paint, the outcome is satisfactory. I am glad I place the order.
troobie
Reviewed in the United States on October 15, 2017
Pros:- Mostly color matches- Built-in brush applicator- Easy to applyCons:- Bottle is only filled 20%- Price- Might need two coatsIt's easy to apply this paint right out of the bottle. There is a ball inside the container to assist with mixing and the cap has a built-in applicator brush. It's not highly precise but met my needs for the sides of a washing machine. The white paint mostly matches and isn't apparent if you aren't looking right at the touch-up area. The paint dries quickly.I was disappointed that the bottle was only 20% full. The price is quite high for a few teaspoons of paint. The paint does dry lumpy and it's hard to get a nice looking touch-up because of that. For deeper gouges or scratches you will probably need a second coat.Overall this product met my needs and it's hard to say if a generic version would work as well.
Ralph Furlong
Reviewed in the United States on January 18, 2015
One of the many dissappointments with the new KitchenAide refrigerators is how thin the paint is n the units. I do not think it is possible to get it any thinner than it is. Because of that, it take very little to scratch the paint down to the metal. When it happens, you will be looking for touchup paint, which is what I was doing when I found this product. So, I ordered it rather than pay a $100 service call plus parts to have the repair facility come out and do it. Here is what I found: 1. Do not be fooled by what it looks like when you get it! The paint color appears to be a yellowish tinged paint! It is actually white and it only looks yellow because of the color of the container. 2. This paint is JUST as thin as the paint put onto the appliance!!! So, expect to put on several coats of paiint to get it right. 3. Allow several hours between coats of paint. It took two days and five coats of this very thin paint to get it right. Remember to use masking tape around what every you are trying to touch up so that it comes out with the least amount of mess.All in all, this works well and probaby matches the quality of the paint originally put on the appliance. Because it is very thin, expect to have to put on many coats of paint to get it correct.
Recommended Products

$13.95

$ 7 .99 $7.99

4.6
Select Option

$24.99

$ 10 .99 $10.99

4.6
Select Option

$21.83

$ 10 .99 $10.99

4.8
Select Option

$24.78

$ 11 .99 $11.99

4.8
Select Option

$17.27

$ 7 .99 $7.99

4.5
Select Option

$20.99

$ 9 .99 $9.99

5.0
Select Option

$22.21

$ 9 .99 $9.99

4.5
Select Option

$23.99

$ 10 .99 $10.99

4.7
Select Option