Your cart is empty.
Your cart is empty.Water Well Pressure Switch Pumptrol 60-80 PSI 1/4”
tlcstat
Reviewed in the United States on September 18, 2024
I am using this to bypass the built-in switching on a 12v water pump used on a RO system. Set it to In at 50 , out at 60. Works perfect. I have purchased a few of these over the last 50 years and this switch is a higher quality than anything I have used to date. Didn't need the second one, but doesn't hurt to have a spare. Good purchase, Thanks!
J&C-FoxLake
Reviewed in the United States on July 9, 2024
I bought this 2 pack, and first one failed after 3 months burning up contacts, so I installed second one that worked for about 3 months, and one of contacts were burnt. So I thought issue was too much current, so Installed a 30 amp contractor, and found that this switch never fully disengages cleanly making contractor to chatter and burn up its contacts too. This caused the pump to burn up, costing $500 to replace well. Now purchased a Merrill switch (don’t need contractor if switch works properly). Stay far away from these defective switches. I purchased last July (2024), seller still selling these DEFECTIVE devices.
Mickey Torbett
Reviewed in the United States on July 17, 2024
Used at my lake house where water pressure has always been an issue. No more great pressure now at all times.
Joel B.
Reviewed in the United States on July 15, 2024
So far so good, replace old one and easy to readjust pressure, thanks
Rick W.
Reviewed in Canada on May 24, 2024
These don’t switch back and forth completely. They switch off at the cutoff pressure then just chatter on and off at the cut in pressure. Really hard on pump. I just bought a good American brand instead and it’s all good now.
Elvculma
Reviewed in the United States on December 23, 2024
Buenas condiciones buen producto
Mikey the Flower Guy
Reviewed in Canada on November 28, 2024
This is a very sturdy, solid, well made pressure switch, versatile, and awesome contact plates
John B.
Reviewed in the United States on November 14, 2024
worked fine,good price
Patrick O.
Reviewed in the United States on April 7, 2024
First, this switch does exactly what it is designed for. 60-80 psi pressure for well pumps. It can be easily adjusted to lower or even higher pressures. I got it to 70-90 very easily, while the differential pressure stayed around 20 psi. Please note: You should never adjust your home well pressure for more than 80psi max.Second, the materials are of a good quality. The steel frame and parts have a chomate coating to help prevent rust. The entrances for the wires have very nice rubber seals that seal and protect the wires very well.And 2 for $20? Heck yeah! Just save the other if you don't need it.
Brian Atkinson
Reviewed in the United States on October 19, 2023
It's working, but it should come on at 60psi and stop at 80, my pressure gauge only goes to 100psi and this has pegged it, it comes on anywhere from 60-80 and It fills my tank to 95-100+PSI
Recommended Products
