Shopping Cart

Your cart is empty.

Your cart is empty.

Walnut Sand DE-Carbon Cleaner HTS558 Engine Intake Valve Cleaner Valvetronic System Walnut Powder Sand Carbon Deposit Cleaning Tool Car Walnut Blaster Cleaner With 23pcs Car Model Adapters 110V/220V

4.4 (1) Write Review
Free shipping on orders over $29.99

$499.00

$ 99 .00 $99.00

In Stock
  • 🚕【 23pcs Car Model Adapter】HTS558 Walnut Sand DE-Carbon Cleaner Compatible For BMW; Compatible For Volkswagen; Compatible For BMW B38/B48/B58; Compatible For Volkswagen Porsche 2.4/2.5/2.8/3.0; Compatible For Volvo; Compatible For GM; Compatible For Toyota; Compatible For Honda; Compatible For GM; Compatible For BMW; Compatible For Nissan; Compatible For Honda; Compatible For Trumpchi; Compatible For BMW N54/N55; Compatible For Volkswagen Au-di EA211; Compatible For Benz; Compatible For Au-di; Compatible For Volkswagen Au-di 2.4/2.8; Compatible For Benz; Compatible For BMW N26/N49; Compatible For Au-di; Compatible For Benz 270/240; Compatible For Land Rover;
  • 🚕【Why Choose HTS558 Walnut Sand Cleaning】 Carbon deposits will reduce the air-fuel ratio, reduce engine output, increase fuel consumption, and cause great damage to the engine. When the combustion in the engine is not sufficient, some hydrocarbon olefin residues will adhere to the engine intake port and cylinder, and the residues on the engine intake port and cylinder will become carbon deposits under the action of high temperature.
  • 🚕【 Special Machine For Removing Carbon Deposits】HTS558 Engine Intake Valve Cleaner is a special machine for cleaning the carbon deposits on the intake pipe and the back of the intake valve of the automobile engine, which can deeply remove the high-viscosity carbon deposits on the intake manifold and intake and exhaust valves. After cleaning, the engine can be kept in a healthy state and ensure the efficient operation of the engine.
  • 🚕【Safe & Efficient】HTS558 Intake Pipe Valve Cleaner Machine uses walnut sand as cleaning agent. A large amount of pores on surface of walnut sand which provide super adsorption capacity, non-toxic and corrosion preventive. As an eco-friendly pure natural polish material, walnut sand has advantages of hardness, pressure resistance and wear resistance. It can clean the intake pipe and backside of the intake valve thoroughly without pipes damage and corrosion.
  • 🚕【Simultaneous Injection And Recovery】HTS558 Walnut blaster special machine for cleaning the back of the engine intake pipe and intake valve. After closing the intake valve, the walnut sand is sprayed into the engine air intake through the air pump (not included), and the HTS558 recovers the walnut sand through vacuum. Because these two operations form a closed loop, walnut powder will affect the carbon deposition on the inner wall of the intake pipe.
  • 🚕【Easy to Operation】Turn off the engine before cleaning, then turn the crankshaft to close the intake valve, and use a high-pressure air pump (not included) to inject walnut powder (not included) into the intake port of the engine. The built-in dust filter of Automotive Engine Carbon Deposition Cleaner help to separate and recover walnut sand from carbon deposits, thus forming a complete cleaning closed loop.
  • 🚕【Integrated Design】The walnut sand of Walnut Blaster Kit for Carbon Cleaning can be sprayed and recycled simultaneously. Built-in dust filter can separate the recovered walnut sand grit from carbon deposits for recycling. Walnut sand residual in intake pipe will go to ashes at high temperature after engine cranking to avoid damaging automotive exhaust systems & parts.
  • 🚕【High-Quality Material To Avoid Damage To The Machine】 The walnut sand used in HTS558 is a pure natural polishing material. It shows high performance in terms of hardness, compression resistance and wear resistance. Chemical cleaners can corrode the lines and shorten the life of the engine. Cleaning the engine with walnut sand can not only clean the intake pipe and intake valve thoroughly, but also will not cause damage to the engine.
  • 🚕【Three Years Warranty and Lifelong Maintenance】For the damage caused by non-human factors, we promises to resend the parts for free within 3 years. For any demand, we warmly welcome you to contact us, and we will reply you as soon as possible within 24 hours.


Product Description

1

HTS558 Walnut Sand DE-Carbon Cleaner

  • HTS558 Walnut Sand DE-Carbon Cleaner is a de-carbon device for intake valve cleaning, whose working principle is to blast the walnut media into the intake valve through high-pressure airflow. The carbon deposits on the valve and cylinder wall impacted down. The walnut media and carbon deposit mixture can be recycled through special joints.
  • HTS558 Engine Intake Valve Cleaner can deeply remove the sticky carbon deposits on the intake manifold, intake valve and exhaust valve. Effectively solve the problems of unstable idling, insufficient air intake, insufficient power, and insufficient acceleration.

  • Functions:
  • High Efficiency : When the high-pressure air flow and walnut sand are injected into the closed engine intake manifold, they will roll and collide rapidly inside, forming a closed loop of continuous injection and suction, so as to quickly remove the carbon deposits inside.
  • Safe and Undamaged : Walnut sand can deeply remove sticky carbon deposits on intake manifold, intake valve and exhaust valve without damaging them. Walnut sand residual in intake pipe will go to ashes at high temperature after engine cranking to avoid damaging automotive exhaust systems & parts.
  • Integrated Design : When the sprayed walnut sand impacts and deposits carbon, the walnut sand particles will be recycled in the equipment at the same time, without manual recycling, saving time and effort.
  • Built-in Filter Screen : Built in filter screen can separate the recycled walnut gravel from the carbon deposit for secondary utilization.
  • Practicality : The overall structure design is simple and light, beautiful and compact, and has strong practicability. With universal pulley, it can move 360 ° in all directions, which is convenient and labor-saving.
  • External Air Source Design : The use of external air source can provide continuous external power during the cleaning work, so as to promote the walnut sand particles to more strongly impact the carbon deposition in the pipeline, and more comprehensively complete the carbon deposition removal work.

  • Recommend:
  • Air pump pressure should more than 0.7Mpa (7bar/102PSI).
  • Walnut powder diameter should between 0.4-0.8mm, amount in 2-4KG(4-9LB).
  • Cleaning time between 1-3 minutes.
23 ADAPTERS

23pcs Car Model Adapters

  • 1pcs Compatible For BMW
  • 1pcs Compatible For Volkswagen
  • 1pcs Compatible For BMW B38/B48/B58
  • 1pcs Compatible For Volkswagen Porsche 2.4/2.5/2.8/3.0;
  • 1pcs Compatible For Volvo; 1pcs Compatible For GM;
  • 1pcs Compatible For Toyota; 1pcs Compatible For Honda;
  • 1pcs Compatible For GM; 1pcs Compatible For BMW;
  • 1pcs Compatible For Nissan; 1pcs Compatible For Honda;
  • 1pcs Compatible For Trumpchi; 1pcs Compatible For BMW N54/N55;
  • 1pcs Compatible For Volkswagen Audi EA211; 1pcs Compatible For Benz;
  • 1pcs Compatible For Audi; 1pcs Compatible For Volkswagen Audi 2.4/2.8;
  • 1pcs Compatible For Benz; 1pcs Compatible For BMW N26/N49;
  • 1pcs Compatible For Audi;
  • 1pcs Compatible For Benz 270/240;
  • 1pcs Compatible For Land Rover;

1

Car DE-Carbon Cleaning Experts

  • Carbon deposits lead to engine idling instablity, insufficient air intake,power down,acceleration weakness. HTS558 helps you clean the carbon deposits effetively restoring your car to a healthy engine.
  • HTS558 Walnut Sand DE-Carbon Cleaner is a special machine for engine Intake pipe and intake valve back side clean. Close intake valve, then spray walnut powder into engine intake via air pump(not include), meanwhile HTS558 will recycle walnut powder by vacuum. This is a closed loop. Walnut powder will impact carbon deposition on inner wall of intake pipe. After thousands of impact, carbon deposition will be clear thoroughly.

2

Built-In Dust Filter

  • HTS558 Automotive Walnut Sand DE-Carbon Cleaner Machine can separate the recovered walnut sand grit from carbon deposits for recycling.

3

Deep Removal Of Carbon Deposits

  • Deeply remove the highly sticky carbon deposits on the intake manifold, intake & exhaust valves.
  • HTS558 Engine Intake Valve Cleaner is specail for intake pipe and intake valve back side clean only, if you want to clean carbon deposition on injector/throttle valve/cylinder, please choose CT150,CT200 or C100. Walnut powder not include in package,please get it in local market; High pressure air pump is requirement(not include in package); Walnut powder residual in intake pipe will go to ashes in high temperature after engine start.

4

External Air Source

  • HTS558 Automotive Walnut powder engine Intake pipe valve clean machine enables the walnut sand grit to strike the carbon deposits more powerfully and efficiently.

1

Integrated Design

  • HTS558 Car Walnut Blaster Cleaner can be sprayed & recovered simultaneously.
  • Adapters suitable forvarious car models.(Include 23pcs Car Model Adapters)

1

Specifications

  • Applications:All vehicle
  • Rated Voltage:110V/220V
  • Rated Frequency:50/60HZ
  • Capacity:13L
  • Rated Power:1200W
  • Vacuum Suction:0.02MPa
  • Air Flow:300L/Min
  • Package Dimensions:400*400*540MM
  • Weight:10KG

What is walnut powder(sand)?

What is walnut powder(sand)?

  • Crash walnut shell into powder, after a vigorous selection process then we get walnut sand.
  • It show high performance in the three area: hardness, anti-pressure, wear-resisting.
  • A large amount of pores on surface of walnut sand which provide super adsorption capacity, non-toxic and corrosion preventive.

What is carbon deposition?

What is carbon deposition?

  • Carbon deposit is the black gel caused by the repeated high temperature of the engine running, which is the residual rubber in the fuel injector, the throttle valve, the spark plug, and other components caused by insufficient combustion of the gasoline in the cylinder.

Why need to clean carbon deposition?

Why need to clean carbon deposition?

  • Carbon deposition will decrease the air-fuel ratio, cut down engine output power, and increase fuel consumption. All of them will damage the engine deeply. Generally, we need to clean the engine carbon after running for 2 years or driving to 4W kilometers. By removing the throttle, a carbon deposit can be seen clearly.
1

Package include:

  • 1pcs x Walnut Sand DE-Carbon Cleaner Machine
  • 23pcs x Adapters suitable for various car models.
  • 2pcs x Spray gun
  • 1pcs x Goggles
  • 1pcs x Recycle hose
  • 1pcs x Recycle hose and spray gun connector
  • 1pcs x Manual Book
  • 1pcs x Gift Box
1

How To Use?

  • STEP 1 : Open head cover of HTS558 Automotive Walnut powder engine Intake pipe valve clean machine and pour into walnut powder (need 2- 4KG ), press dust guard on walnut powder then close cover.
  • STEP 2: Join spary gun muzzle and recycle hose together (there is a hole on recycle hose).
  • STEP 3: Remove intake manifold of engine, plug spray gun into intake, turn crankshaft to close intake valve. Connect high pressure air pump (not include) to HTS558 Walnut Sand DE-Carbon Cleaner Machine.
  • STEP 4: Connect AC power, start clean. The process should last 1-3 minutes (depending on carbon deposition circumstances).Close HTS558, check up cleaning result. Normally, walnut powder can be reuse 5-10 times (depending on carbon deposition. circumstances)

  • Why Choose HTS558 Walnut Sand De-Carbon Cleaner ?
  • HTS558 Walnut Sand De-Carbon Cleaner adopts the physical Harmless Technology of walnut sand cleaning and is specialized in efficient and non-destructive cleaning of engine carbon deposition. The walnut sand is injected into the intake manifold of the engine through the high-pressure airflow. The walnut sand under high pressure and high speed will roll and collide in the closed intake manifold, forming a closed loop of continuous injection and suction. Repeat this process to brush off carbon deposits on the intake valve and intake pipe, and clean the carbon deposits without disassembling the main parts of the engine, which is fast, efficient, safe, and reliable.

Kunde
Reviewed in Germany on January 5, 2025
Lieferung ist prompt erfolgt. Das GerĂ€t könnte in der Auswahl der Materialien durchaus hochwertiger sein.zB. ist die FĂŒhrung der StrahldĂŒse sehr schwergĂ€ngig. Hier wĂŒrde sich eine weiche besser bewegliche Silikon FĂŒhrung gut machen. Die QualitĂ€t der SchlĂ€uche ist ebenfalls ungenĂŒgend. Viel zu starr und unbeweglich. Die StrahldĂŒse wĂ€re aus einem beweglichen Schwanenhals wie man ihn bei Feuerzeugen findet durchaus besser geeignet die zum teil schwer zugĂ€nglichen EinlasskanĂ€le besser zu erreichen.Abschliessend kann ich sagen, dass ich die Arbeit erfolgreich erledigen konnte.