Your cart is empty.
Your cart is empty.MADE IN THE USA This pump and the kit contents are all made in the USA. 700+ horsepower with Boost, this pump will support gas and E85. We understand the importance of a good quality kit and here we have the best fuel line and clamps to support this pump. We realize that with one failure of your fuel system your boosted engine can run lean and fail. This pump is the exact same size and dimension as the Walbro 450. It also uses the same size lines to make this pump a direct replacement. Pump Specifications: Pump Length: 131mm/ 5.15 inches Main Housing Diameter: 39mm/ 1.53 inches Lower Housing Diameter: 50mm/ 1.96 inches Fuel inlet Diameter: 11mm OD/ .43 inches or 3/8 line Fuel Outlet Diameter: 11mm OD/ .43 inches or 3/8 line Flow rate: 470lph@40psi (120 + gph) Test Voltage: 13.5 Volts
Wayronexis Fernandez
Reviewed in the United States on July 5, 2025
Completely fake product, I got a original walbro and came in a branded box and pump spouse to have printing brand and part number,now installed and got fuel delivery problems , DON'T BUY THIS PUMP IS A CHEAP REPLICA
Kenny Stover
Reviewed in the United States on June 29, 2025
Fake product on both boxes says made in China the real Ti Automotive 525L F0000285 fuel pump has model and made in usa on it do not buy.. may work but this is not what I paid for a generic pump don't get scammed like I did
william Thomas
Reviewed in the United States on June 27, 2025
The ad shows a Ti automotive pump and states made in the USA. The fuel pump is a cheap no brand pump which has to be returned. Showed up with a printed label that said "walbro hellcat pump" it was in a plain brown box with made in china printed on the box. Ti automotive pumps come in Ti automotive branded packaging and are lazer branded with Ti automotive on the pump body this pump has no markings. The wire gauge on the pump is also way undersized.
Angel
Reviewed in Mexico on March 11, 2025
No es original
Customer
Reviewed in the United States on November 18, 2024
Pump works great making great power on my supra.
Josh Scarbrough
Reviewed in the United States on October 3, 2022
Installed this along with a new XDI HPFP to convert my f150 to e85 and it works perfectly
Peter
Reviewed in the United States on June 27, 2019
I have this in a daily driven supercharged e46 m3. Piggyback off the oem fuel pump relay and run 10gauge wiring to this pump, otherwise you will burn out the oem fuel pump relay and wiring . Other than that this pump will give you no problems
Mychailo Toloczko
Reviewed in the United States on June 18, 2019
I've tried all the high flow Walbros including the F90000262, F90000267, F90000274, and now this pump, the F90000285. This is not a fake, and its definitely a big step up from the 274. It completely cured the fuel pressure fall off from target 44 psi I was seeing as the motor was crossing into the 550 whp territory on E85.This pump can draw 20-25 amps, so as a few others have said, its probably not safe to run this pump on stock wiring because it pulls so much amperage. This of course depends on the current draw of stock fuel pump that was in the car.
R. White
Reviewed in the United States on June 14, 2019
Bought for a turbo civic project. It fit the stock hanger but, BARELY. Had to ditch the pump connector and solder some standard Male spade connectors to use the stock pump harness connector. Simple enough and super easy. Pump runs really quiet when compared to the 450. The Hellcat is having no problem feeding my setup; no dyno yet but it is pushing over 400 horses.
Recommended Products
