Your cart is empty.
Your cart is empty.Product Description
HIHIAV Valve Cover Gasket
Realiable &Durable
HIHIAV focus on Valve cover gasket from 1987 on and received high assessment after many years market test.We cherich our brand and know only customer's satisfy and trust makes us goes further! HIHIAV will always on our best to supply high quality product for our customer!
Leaks from valve covers may be problematic. These not only cause unsightly stains but may lead to serious problems if not repaired.
What is a Valve Cover Gasket?
Valve cover gasket is designed to seal the valve cover to the surface of the engine cylinder head, the valve cover gasket prevents motor oil from leaking out of the joint part.
Pay attention when replace gasket:
* Pls use genuine gasket,wipe the two joint surfaces of engine and clean valve cover with a soft brush.
*Clean the valve cover with cleaning agent, clean the contact surface between the valve cover and cylinder head, install the valve cover gasket, apply gasket maker, and screw the screws diagonally from the middle to both sides.
*Don't scar the valve cover surface when carving debris.Tighten the fixing bolts of valve cover evenly,not too tight,which might hurt your cover.
Replacement Part Number:
VS50639R1,1S7Z-6584-BA,LF02-10-230, ZZCA-10-230, L501-10-230, 1S7G6K260AA, CV6Z6584-A ,L50110230
VS50639R1 Valve Cover Gasket (only fit engine with roof mount antenna, and plastic valve cover)
Compatible With:
Ford
- 2005-2008 Ford Escape 2.3L
- 2009-2019 Ford Escape 2.5L
Ford
- 2004-2007 Ford Focus 2.3L
- 2005-2011 Ford Focus 2.0L
- 2006-2009 Ford Fusion 2.3L
- 2010-2020 Ford Fusion 2.5L
- 2004-2011 Ford Ranger 2.3L
- 2010-2013 Ford Transit Connect 2.0L
- 2014-2020 Ford Transit Connect 2.5L
Mazda
- 2004-2009 Mzada 3 2.3L
- 2004-2013 Mazda 3 2.0L
- 2010-2013 Mazda 3 Sport2.5L
- 2009-2013 Mazda 3 Sport 2.0L
- 2006-2010 Mazda 5 2.3L
- 2012-2017 Mazda 5 2.5L
- 2003-2008 Mazda 6 2.3L
- 2009-2013 Mazda 6 2.5L
Mazda
- 2004-2010 Mazda B2300 2.3L
- 2010-2012 Mazda CX-7 2.5L
- 2006-2015 Mazda MX-5 Miata 2.0L
- 2005-2008 Mazda Tribute 2.3L
- 2009-2011 Mazda Tribute 2.5L
Product Specification--We mark the size so that you can know our gasket better.
Symptoms of a Bad Valve Cover Gasket
- Dirty valve cover –evidence of leaking oil
- Engine low on oil
- Burnt oil smell
- Rough running engine(result in misfires)
- Engine oil stains on the ground
Size
You can find it's size on the picture
Package include
1 set Valve Cover Gasket
Edgar
Reviewed in the United States on February 5, 2025
Era lo que esperaba. Excelente
Reo
Reviewed in the United States on February 23, 2025
Quality is like oem part
Thomas
Reviewed in the United States on February 15, 2025
Not sure why you would sell the kit without the VVT seal also. It worked fine, make sure to purchase the other seal before you start.
Scotchy
Reviewed in the United States on December 15, 2024
The gasket worked perfectly on my car and we are tooling down the road every day just fine with no loss of oil or any leaks at all
Kelly
Reviewed in the United States on November 2, 2024
Part of a bunch of stuff I was doing including plugs and coils was to swap out the leaking gasket on the valve cover. It wasn't leaking outside the engine, it was leaking into two of the spark plug recesses, one was totally filled with oil!This one went on correctly and hasn't leaked. Took a 3600 mile road trip after it was installed with no drama so I think we're good for another 140k miles (how long it took the original to fail).
Dalton
Reviewed in the United States on October 30, 2024
Great product
Wh
Reviewed in the United States on October 13, 2024
Value for the. Money
Bewildered.
Reviewed in the United States on October 16, 2022
I've installed more then a few valve cover gaskets. When I installed this one it was loose in the valve cover. In my experience it should be snug. Upon putting it back on the head part of it came out of the groove and I didn't see till after I started tightening it down. As result it got pinched and It was ruined. I should have paid closer attention. I went down to my parts store and got a felpro. What I should have done to start with. Worked like a charm and stayed in the groove like it's supposed to.
Recommended Products