Your cart is empty.
Your cart is empty.4.5 out of 5 stars
- #4 in Projector Mounts
MOUNT-VP01W is a brand new, heavy duty, all steel, universal ceiling projector mount. Ideal for any home or office, this high grade steel mount is weight tested at 30lbs and designed with adjustable arms to fit most projector brands with mounting ranges from 2†to 12.5â€. MOUNT-VP01W sits 6†from flat ceilings making it low profile. Features include 15 degree tilt, 15 degree swivel, and 360 degree rotation to maximize projection angles. Simple tightening of joints makes this as fluid or stationary as desired. This is a quick assembly and comes with common mounting hardware. The projector mount comes in a white finish.
Abhijeet
Reviewed in the United States on February 25, 2025
I liked it for few reasons, it can work in a lot of settings, it’s light but sturdy and very affordable compared to other products. I had to do a workaround and add additional metal clips to make it work but these were few bucks from Home Depot and worked well.
DavidS
Reviewed in the United States on December 21, 2024
This was a great find. It’s the least expensive mount that I saw, and it does the job! I did some creative maneuvering and got the mount connected to the projector with some trial and error.I mounted the ceiling piece with no issues, but I had to think about the slant of the projector before mounting or I would have mounted the ceiling piece backward. If you are going to swing your projector downward slightly, you need to mount the ceiling piece with “made in China “forward, toward the screen. That wasn’t mentioned in the instructions.It looks fine, but you really can’t see it with the projector right under it. I do believe it is durable as it is made of metal and the screws all tighten up. It pivots in about any direction, so you should be able to get your projector image as desired.I recommend mounting a board from joist to joist, or a piece of plywood attached to one joist, lest the mount might dig into your drywall. I would never mount a projector using drywall anchors.I don’t recommend all of the products I buy on Amazon, but I do recommend this mount.
T5mickb
Reviewed in the United Kingdom on December 14, 2024
Great value for money and does the job a treat.
Leonel Ibarra
Reviewed in Mexico on April 3, 2024
Súper resistente, buena calidad y trae varios modos y accesorios, mi proyector es gigante y pesa más de 13 kilos y lo pudo sin problemas.
Joep de Wit
Reviewed in the Netherlands on April 19, 2024
Deze mount past goed op mijn BenQ beamer en voelt stevig aan. Fijn dat deze ook op 2 assen kan roteren zodat je door middel van deze mount je beamer altijd recht op je muur kan projecteren.
Mr. J
Reviewed in the United States on April 1, 2023
Used with my new Optoma Laser projector....1st things 1st, I am mechanically inclined so for me this projector mount worked perfectly with no modification, "however" it did require a little planning with the mount install on the projector itself. That said, in order to get my 3 points of contact screws tightened on the projector with the mount, 1 screw just needs to be snug tight but not too tight, enough tightness so you can adjust/move and tighten the other 2 screws really good and so the mounting cage is within the mounting center point of contact with the projector. So you know, Optoma's have only 3 mount holes on the projector itself, some have 4 which won't be a problem for you unless you come up short, I used 3 mount arms on my mount, the object is to center the mount in between the 3 mount holes. If you get stuck and your a man, ask a woman for help, if available....they are better at math and angles - a scientific fact, "utilize any good tool in your toolbox" plus it doesn't hurt to get a fresh different perspective, she just might give you a new plan of approach too.It may sound confusing but it really isn't, while doing it, it would "click" with you..."ah hah I know what he talking about". Here's the thing, a snug tight screw is not going to unloosen, the object it's securing isn't constantly moving or vibrating in any way to make the mounting screws loosen. People get to critical when they have to secure something, and over do it on high dollar value items.I found the parts well made, finished very well and heavy duty to deal with it's job of holding the projector in a fixed position. Happy installing, Marc
Joe
Reviewed in Canada on December 30, 2022
I installed a ceiling mounted project for my church. This mount is made well and it is very easy to install. I don't think you would be disappointed if you purchase this particular unit. The only thing I noticed that made it a bit tricky when installing it to the projector is that if your projector has three mounting locations instead of four, you have to stare at it for a bit to figure out how to adjust the arms so that it fits properly-but I finally figured it out.
José Daniel Urquiza
Reviewed in Mexico on January 19, 2022
CUMPLE CON LO QUE PROMETE YO LE DOY UN 9
David M.
Reviewed in the United States on August 30, 2017
Somewhat vague instruction sheet but since there is nothing difficult to figure out with this mount installation was very straightforward and easy once I figured out the best location for my projector. Adjustments are self explanatory when looking at the mount and making it fit your particular projector is not difficult because the legs that are used for attaching the projector can move in any direction and several sizes of screws as well as washers are included in the kit.Overall the mount looks nice with a white powder coated finish and zinc plated bolts. It would be nice if they included some sort of caps to cover the lag bolts which are used in my installation to secure the mount to the ceiling. In my case I used two lag bolts that screw through the drywall and into the lumber of the truss. I measured, marked and then drilled a pilot hole for each lag bolt and then screwed them in tightly. It is very solid.Most of the joints on the mount are fitted with nylon washers which allow you to just crack the allen cap screws slightly loose, scoot the mount to make an adjustment and then snug them back down again to hold everything firmly in place. It is simple yet it works surprisingly well.The mount does hang the projector slightly farther from the ceiling than I would have liked but it looks fine.I'm using the Benq HT2050 projector which shines 11ft to a Monoprice motorized 120 inch screen it looks really nice and watching movies is awesome.
Recommended Products
$23.99
$ 11 .99 $11.99