Your cart is empty.
Your cart is empty. Specifications
Item Model Number: WT400
Table Dimensions: 30 x 20 in / 76.2 x 50.8 cm
Tilt Angle: 0°, 30°, 90°
Table Height: 25-32 in / 63.5-81.3 cm
Maximum Weight Capacity: 400lb Max
Tool Slots: Three 1.1" x 22" Slots
Material: Carbon Steel
Net Weight: 39.2 lbs / 17.8 kg
Package Content
1 x Foldable Welding Table
1 x Set of Hardware
Steve G.
Reviewed in the United States on February 5, 2025
Nice welding table. I like the wheels for easy transport, but the pull handle is way to small. Even with washers, it pulls right through the mounting holes. Also, when folding the table, it folds against the plastic knobs that are for tightening when adjusting height. I bought 8mm wing bolts that are smaller and replaced the knobs. All and all, besides the things I mentioned, it's made very well. I recommend it.
Tom Cornwell
Reviewed in the United States on February 27, 2025
Not to hard to assemble, but awkward, if you have a large table or if you assemble on the floor. The way the wheels are set up des not make any sense, very difficult to move around. Biggest down fall is they use phillips screw heads instead of allen type screw heads. Poor instructions for assembly. Poor functionally. Would not buy again, in fact I should of sent it back.
Brandon S.
Reviewed in the United States on February 13, 2025
GREAT table for the price! I was able to put it together in a couple hours, without completely devoting my time to it. It feels sturdy enough for how cheap it was, I simply can’t build a table similar to this even CLOSE for what I purchased it for.The ONLY complaint I have, and the reason I gave 4 stars, is because the table has been redesigned a few times and the directions are not updated. I was also missing a bit of hardware, but I made due. I would strongly advise using hex bolts for the pivoting plates on each side, and using a wrench to tighten them. The wing nuts are NOT sturdy enough. I also had to take sandpaper and a file to the edges on the table, as they are sharp!Those few things in mind are still VERY minor considering I paid under $100 for this table. I would recommend this to anyone who has a small shop space and needs to save room.
Ian R.
Reviewed in the United States on February 13, 2025
This table seems to be solid and well built. However, mine came missing 5 screws 3 nuts and 2 washers. So I'll be off to the hardware store to get what I need to finish assembling. Fairly simple to put together as long as they provide all the parts lol
Customer
Reviewed in the United States on February 11, 2025
This table came with incorrect threaded parts after I assembled 98% of the whole thing. Only option is to ship it back or choose something else. Either way disassemble and ship back. The threaded bolts the hand shanks go on are welded to unit, so can’t just replace them.
John B
Reviewed in the United States on January 24, 2025
I liked the price and expected to provide the assembly labor. I was not let down as my expectation was exceeded - too a while to assemble this thing. I was missing hardware and the spot welded nuts on the legs easily snapped off when tightening wheels for the height adjustment was slightly tightened to hold the table top in place. Poor design as the table top struggles to stay flat with even the slightest pressure on the sides - not supported but for two places in the center and a thin sheet metal half moon slide. If I could melt this down and start over, I most definitely would. Spend a little more money and get yourself something that actually is functional - this is not.
Joey
Reviewed in the United States on January 13, 2025
The table itself is nice a sturdy for a folding table. It feels heavy duty. the assembly instructions are easy to follow but the hardware that comes with the table and the hardware the instruction tell you to use does not add up in the end.To assembly the table with the hardware provided you'll have to use some intuition on which bolts need a nut and which ones should have the wing nuts.For example, the part of the table that rotates to collapse the table, the instructions say to use a bolt and standard nut. I used a bolt and wing nut since i had run out of standard nuts at this point and i wanted to be able to loosen and tighten the bolt by hand.I also had issues with the feet of the table. one of my feet broke when i was installing the bottom bar.All in all the table is really nice and does everything i need it do for welding.
Welder
Reviewed in the United States on December 27, 2024
Compared to other folding tables, this design is very sturdy and easily portable with the attached handle. One of the heaviest designs out there. Once folded it takes up very little space against a wall. Yes if you put a lot of heat into the table it will warp but is very good for light duty, homeowner type work. I would question the 600 lb capacity as it doesn’t seem capable of this load. The down sides are how the support bars with the attached feet are designed as they press into hard plastic mounts and can fall off. May be a safety issue so be careful. And of course the assemble instructions are beyond terrible. But if you are handy you can figure it out.All the assembly hardware was there with a few extras to spare.I would buy this table again. A fair deal for the price.
Recommended Products
