Your cart is empty.
Your cart is empty.Product Description
Tough Equipment & Tools, Pay Less
VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. Today, VEVOR's products are sold in more than 200 countries and regions with 10 million plus members worldwide.
Why Choose VEVOR?
- Premium Tough Quality
- Incredibly Low Prices
- Fast & Secure Delivery
- 30-Day Free Returns
- 24/7 Attentive Service
4 Quart Double Acting Hydraulic Pump
Double-acting Hydraulic Power Unit & 2 Additional SAE#6 Connectors & 12V DC Motor
This hydraulic pump is a double-acting power unit for both lifting and lowering. It has a 4-quart sturdy metal reservoir and is designed with a 12V DC motor that can provide strong power for hydraulic systems like dump trailers, forklifts, lifting platforms, etc.
Please Note: All of our hydraulic pumps come with an M18*1.5 connector and an additional SAE6 (9/16") connector, which can be replaced according to your actual needs.
- Product Details
- Easy to Use
- Reliable Quality
- Rapid Start
- Wide Application
Key Features
Double-Acting Power Unit
This double-acting hydraulic power unit has a 12V DC motor (Power:1.6-3.0kw) and a 4-quart metal reservoir; it has SAE#6 ports with 3200 PSI max relief setting on A and 1500 PSI on B port. The flow rate is 2GPM. Rated speed: 2850 r/min.
Convenient Design
Our hydraulic electric pump has been fully assembled. It comes with a hand-held remote control and 2 additional SAE#6 connectors for replacement. The whole power unit is easy to wire and easy to operate.
Quick Start＆Lifting
With the powerful 12V DC electric motor, our hydraulic pump for dump trailers can start rapidly and provide quick oil output. In addition, it can provide strong power that will lift heavy objects in a short period.
Long Lasting
You can rely on the quality of this electric hydraulic pump as it is made of special-treated sturdy metal, and the whole structure has been reinforced. It is also equipped with a powerful electric motor that you can use as often as you like.
Simple Installation
All of our 12-volt hydraulic power units have been pre-assembled before delivery, and we provide instructions for operation so that you can install and use the hydraulic pump easily. Horizontal mount is recommended.
Wide Application
As a great power unit, this hydraulic pump can be used for many things, such as truck tailgate lift, RV leveling, scissor lift, dump trailers, lift truck, snowplow, aerial platform, road signs, material handling, wheelchair lifts, etc.
Package Content
- 1 × 4 Quart Double Acting Hydraulic Pump
- 1 × Instruction Manual
- Several Related Accessories (Including connectors)
Specifications
- Tank Material: Metal
- Displacement of hydraulic pump: 0.825GPM
- Pressure relief valve: 22MPA (3200 PSI Max. Relief Setting For Increased Lifting Power on A port)
- Rated speed: 2850R/MIN
- Motor power: 1.6-3.0KW; Motor voltage: DC12-DV24
- Fuel tank: 4 quart; 4 Quart Metal Reservoir
- Double acting Power-Up/Power Down
- 1500 PS Max Relief Setting on B port
- SAE # 6 Port, Horizontal mount
- Hand held pendant with about 15 feet (4.5 m) removal cord and start solenoid
Rodney Pekarek
Reviewed in the United States on August 29, 2024
This pump is of high quality and seams to work as advertised!
Manuel82
Reviewed in Mexico on August 19, 2024
Ya la instale en una Silverado 3500, 2006 y hasta ahora funciona bien, incluye su instructivo, el gato hidráulico es de 5 secciones para un máximo de 22 toneladas, la bomba no se forza al momento de levantar, hace su trabajo sin problema. Recomendado.
rroustand1
Reviewed in the United States on August 1, 2024
The performance is amazing, makes my job so much easier! We installed this in our single car trailer and does the work itself! I Highly recommend this product! I’ll post pictures soon !
Ben B
Reviewed in the United States on July 3, 2024
We had an older dump trailer with a gas engine / hydro pump setup that was not working properly anymore. I pulled all the old components off, purchased a cargo box from harbor freight and installed this pump and a battery in the cargo box on the nose of the trailer and now the dump trailer is working great again. Seems to have plenty of hydraulic horsepower to lift a 7'x14' trailer loaded down with ease.
Zapper
Reviewed in the United States on June 19, 2024
I have two of these things, and they worked fine for several months. But then they both started having motor issues, they barely run at all. I found that if I tap the motor housing with a hammer, they would sometimes wake up and run, but not always. So I took them both apart... and found the problem easily enough! That motor had that much moisture, corrosion, rust and dust in it, no wonder it wouldn't run. THESE MOTORS ARE NOT SEALED AT ALL!! The brushes were corroded tight so that they couldn't slide, the sides of the motor were rusty. So I got out the wire brush, brake cleaner, sand paper, and P'BLASTER. Took it all apart, cleaned it up, lubed it up, and re-assembled it. Put it back together with gasket maker between the motor housing sections to seal it up. They both run fine now, after 3 hours of work. This was basically a $200 crash course in electric motor repair. And I didn't even start talking about the stupid hydraulic fittings on the side of the pump. That's very frustrating when you are trying to install it and the local hydraulic shop can't even come up with the right thing. Check out all the other reviews that talk about that....! Hey, you get what you pay for!!! Why do we even buy from the Chinese!?
M. Miller
Reviewed in the United States on December 27, 2024
I haven't finished installing this pump yet, but I wanted to leave a review to note something that has caused a delay and extra expense for me.I ordered #6 SAE fittings because that's what's described in the listing and in the instruction manual available online. However, the pump I received does NOT have SAE #6 sized ports.As far as I can tell, the female ports on the pump are SAE/ORB #5 (1/2"-20 thread) and it comes with two set of fittings ... SAE #5 Male to 3/8" JIC Male and SAE #5 Male to 3/8" NPT Male. The fittings I ordered with the pump based on the listing didn't work, so I'm waiting on a new order of SAE #5 (hard to find) fittings before I can finish the install.3 stars for now, I will update this review and the rating when I'm able to install it.
Ronny Hörnman
Reviewed in Sweden on October 14, 2024
Till en skoter sladd för att höja och sänka blader har ej fått klar sladden
Garrett Bouslog
Reviewed in the United States on January 3, 2024
This replaced a 120 volt hydraulic pump on my scissor lift and has made the lift a lot more useful away from 120 volt power.
NW COMMUNICATIONS INC
Reviewed in the United States on October 17, 2022
I purchsaed this pump for a 12 foot tilt trailer that had a valve on the ram going port to port a manual setup. I read a lot of reviews and I was worried about a lot of people having problems with trying to find some non standard British fittings. It came in the box with 4 fittings. I removed the ones in the pump replaced them with the other provided. I made two hoses up for exact fit. Everything I used was power steering ram fittings. Welded a piece of flat bar 2"x3/8 8" long to the frame for mounting. I bolted the pre threaded pump block with M10-1.5x35MM to the welded flat bar. The the port coming out of the relay valve with the red knob on it is the pump (up) button and the other side of the block is the the (down). I adjusted the pump so it would not over pressure up or down, so it would bypass at a reasonable pressure. It lifted 2800Lbs with ease. The unit was properly prewired. All of the electrical stud contacts had to be torqued. Be carful the isolated relay contactor is a cheaper one but sufficient for the load. I Used two number 2 wire with no voltage drop at 3' long. Pump is fast. I installed some baffles on the hoses at A-B outputs to tame it down little. I dont think the solenoid and relays are water proof. If this thing will be exposed to weather I would build a cover over the pump electronics. I have only ran it 30-40 times to soon to tell if it will last. Good design well made product for the money. Unit came packaged good.
Joe Troyer
Reviewed in the United States on August 29, 2019
Very clear instructions on installation. This pump was installed on a commercial vehicle and it gets used all day, every day, and has had zero issues for 8 months now.
Recommended Products